Dodge Sprinter 3500 Box Truck on 2040-cars

Auto blog

All hail the Hellephant, Mopar's 1,000-horsepower crate engine

It's shocking to say this, but the all-powerful Dodge Demon looks weak now that Mopar has unleashed the Hellephant. This crate motor makes 1,000 horsepower and 950 pound-feet of torque, and its name is a combination of the nickname for the old 426-cubic-inch Hemi V8 and, obviously, the Hellcat. This monster is a 426-cubic-inch version of the current third-generation Hemi V8 topped by a supercharger similar to what the Hellcat line packs. Everything is cranked up to — or perhaps, past — 11. The engine block is made of aluminum and weighs 100 pounds less than the equivalent iron block. All of the internals are forged. The stroke and bore have been increased. The supercharger produces 15 pounds of boost and displaces 3 liters; more than the 2.7-liter blower on the Demon and the 2.4-liter blower on the Hellcat. And as big and powerful as it is, it will still rev to 7,000 rpm. It's a thoroughly monstrous motor, but shockingly, it won't be that difficult to live with. For one thing, Mopar will offer a complete kit to get the engine up and running, including an engine computer, wiring harness and drive-by-wire throttle. It also runs on 93-octane pump gas. That's especially amazing considering the Demon engine "only" makes 840 horsepower, and that's on race gas with 100+ octane fuel. It also has us wondering what the Hellephant could make on racing fuel. The Mopar folks did say that there's room to add more power. Pricing wasn't announced for the Hellephant engine. The Hellcat crate engine retails at $19,350 directly from Mopar, so it's safe to assume that the Hellephant will go for more. The installation kit with the computer and harness will be an extra charge of likely over $2,000, based on the Hellcat kit. The engine and the kit will be available in the first quarter of 2019. Related Video: Featured Gallery Hellephant Crate Engine SEMA Show Chrysler Dodge Jeep RAM Performance dodge demon hellephant

Dodge reveals a few of the goodies in the Demon crate

One of the teaser trailers for the eagerly anticipated Dodge Challenger Demon featured a big crate full of goodies for the car. As with the car, though, Dodge was a bit coy about what was inside, simply saying there were 18 items, consisting of tools and parts. Now we know what tools the car gets, and they're some very nice Snap-On pieces. All of the tools and accessories are branded with the Demon logo. And the tools included should be perfect for easy tire changes at the track. Specifically, the tools include a hydraulic jack, cordless impact wrench with charger, torque wrench, and a tire pressure gauge. There's also a fender cover to protect the paint when working under the hood, and a nice carrying bag with the Demon emblem on the side. And, naturally, all of the tools are limited-edition units made specifically to accompany the Demon. If you want to do anything more involved than wheel swaps, you'll need to supply a few tools of your own. But this should be good for the weekend drag racer or autocross driver who wants to drive down to the course on street tires, then throw on the sticky rubber at the track. Also, as you may have noted, these tools only constitute six items in Dodge's count, leaving 12 others that must be car parts. We know that among the parts are some factory Demon wheels, and items that Dodge describes as "Direct Connection Performance Parts" and the "Demon Track Pack System." Details on these remain scarce, but they will probably be revealed closer to the car's debut date of April 11. Related Video:

2019 Dodge Challenger R/T Scat Pack 1320 gets race-focused upgrades

The Dodge Challenger SRT Demon is one hell of a machine. It's a single-minded 840-horsepower jackhammer, meant solely to burn rubber and win drag races. It's packed with all sorts of goodies like a transbrake, line lock, and a torque reserve mode. Still, it was an extremely limited-production model. It's also sold out. What do you do if you want some fun on the drag strip and you can't find our don't need the power of a Demon? Buy the new 2019 Dodge Challenger R/T Scat Pack 1320. You can really think of the Scat Pack 1320 as a Demon without the wide bodywork and the supercharged 6.2-liter V8. Instead, you'll find Dodge's tried-and-true 6.4-liter naturally-aspirated V8 under the hood making 485 horsepower and 475 pound-feet of torque. The TorqueFlite 8HP70 eight-speed automatic is the only available transmission. It's required equipment to use the TransBrake and Torque Reserve system. All-four wheels are wrapped in Nexen SUR4G Drag Spec 275/40R20 street-legal drag radial tires. The 1320 names comes from the length of a quarter-mile drag strip — 1,320 feet. The Scat Pack 1320 can run the quarter-mile in 11.7 seconds at 115 mph and hits 60 mph in just 3.8 seconds. Of course, that's in its lightest configuration. Like the Demon, the Scat Pack 1320 only comes with a driver's seat. The passenger and rear seats are each $1 options. The goal was to give grassroots racers a bare-bones performance car at a relatively reasonable price. You don't need passengers if you're only racing. You also shave 114 pounds from the car's curb weight. Other upgrades include an SRT-tuned suspension, a 3.09 rear axle ratio, 41-spline rear half-shafts, 20 x 9.5-inch aluminum-forged wheels with knurled bead seats (to keep the tires from slipping on the rim) and upgraded Brembo brakes with four-piston calipers. The Challenger R/T Scat Pack 1320 joins a number of other upgraded 2019 Dodge models. That includes the Challenger SRT Hellcat Redeye and the upgraded 2019 Charger SRT Hellcat. The Scat Pack 1320 adds $3,995 to the Challenger R/T Scat Pack's base MSRP. That's not the whole story. Since the automatic is mandatory, you need to tack on another $1,595. Add in destination, and the Scat Pack 1320 will set you back at least $45,980. Cars will hit dealer lots early next year. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.