New 2014 Ram 4500 Crew Cab 4x4 With 9ft Skirted 4 Toolbox Gooseneck Flatbed on 2040-cars

Auto blog

Stellantis aims to eliminate separate inverter, charger to improve EV efficiency

Stellantis has announced that, in collaboration with French battery company Saft and French National Center for Scientific Research, has made significant progress in eliminating two major components of an electric vehicle powertrain: the on-board charger and the power inverter for the motor. The company claims that doing this will allow for better space use in vehicles, as well as improvements in efficiency, cost and reliability of components. As a quick primer, also explained in the below video, the on-board charger and power inverter are sort of translators to get the right current to different parts of the electric powertrain. The on-board charger takes AC power from the grid and converts it to DC to charge the batteries. Then when power goes from the batteries to the electric motor, the power inverter converts that DC power back to AC. These components aren't exactly small. Frequently you'll find them packaged somewhere under the hood. What Stellantis and its cohorts have developed, and have been using on a test vehicle since last summer, are small power inverter boards that can be mounted very closely to the battery packs. They can handle both conversion needs, for charging and discharging, instead of needing two separate devices. The most obvious perk to this is that you can do away with those traditional components and free up more space, either for making smaller vehicles without losing interior volume, or adding space to a vehicle that wouldn't have had it otherwise. There's the additional benefit of reduced weight, something that EVs struggle with. Stellantis also claims improvements in efficiency, reliability, and cost, however, it didn't go into detail as to how this setup would do that exactly. We'll try to get in touch with representatives from Stellantis in order to get more information. We're still a ways out from seeing this technology in production Stellantis vehicles. The company said it aims to apply it to vehicles by the end of the decade. Saft is also looking at using it on stationary battery systems as well. So maybe we'll see it on a 2029 Ram 1500 REV, but for now, we'll be living with traditional chargers and inverters. Related Video: Green Alfa Romeo Chrysler Dodge Fiat RAM Technology Electric

SpeedKore carbon-fiber 1970 Dodge Charger packs a 996-hp Demon engine

SpeedKore Performance does some pretty neat things with carbon fiber. SEMA is always the place to show off new and interesting builds, and SpeedKore has a few new offerings on display. We talked about the lightweight carbon fiber 2018 Dodge Demon late last week, but now that SEMA 2018 is in full swing, we've got a look at something even cooler, an all-carbon, Demon-powered 1970 Dodge Charger "Evolution." SpeedKore Performance is based in Wisconsin and has been churning out SEMA showstoppers for years. In addition to the Demon, take a look at this Shelby GT350R the shop modified a few years back. The Charger Evolution is named so because it further modifies the SpeedKore Charger "Tantrum" that was used in the " Fast and Furious" films. That car used a carbon composite body and was fitted with a 9.0-liter Mercury Racing twin-turbo engine making an absurd 1,650 horsepower. The Evolution might be down on power — only 996 horses thanks to a modified Demon crate engine — but the goal was to create something a little more usable than the Tantrum. Upgrades include a smaller supercharger pulley, larger fuel injectors, a custom cold-air intake, stainless steel headers and a custom exhaust with SLP mufflers. There's also a Dailey Engineering dry sump, upgraded oil cooler, and Saldana radiator. It's also lighter, thanks to even more carbon fiber. SpeedKore had a goal to get the '70 Charger to about 3,200 pounds. To get there, the Evolution employs carbon-fiber bodywork, an aluminum floor, a steel roll cage and a new 2x3-inch steel box frame. SpeedKore's autoclave is large enough to bake a one-piece roof, hood and quarter panels. The bare bodywork has been finished with a clear coat to help prevent fading. The Evolution uses billet aluminum for the door handles, fuel cap and grille, all finished in a bronze-nickel coating to pair with the HRE wheels. In addition to the floor, aluminum was used for the firewall, transmission tunnel and radiator shroud. To slow the Charger down, it uses Brembo brakes with six-piston calipers up front and four-piston calipers in the rear. The suspension uses Penske adjustable coilovers while Michelin Pilot Sport 2 tires wrap 19x10-inch front wheels and 20x12-inch rear wheels. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

FCA, Ford idle plants due to semiconductor shortage

DETROIT (Reuters) - Ford and FCA will become the latest automakers to idle production facilities due to a semiconductor shortage. Ford's Louisville Assembly Plant in Kentucky will idle for a week, borrowing a down period from later in the year to compensate. Per Automotive News, FCA is idling its Brampton facility in Ontario, Canada, and one other site which has not yet been identified.  Louisville Assembly is the production site for the Ford Escape and Lincoln Corsair SUVs; Brampton Assembly produces the Chrysler 300, Dodge Charger and Dodge Challenger for FCA.  A Ford spokeswoman, who declined to identify the semiconductor supplier, confirmed the temporary shutdown to Reuters. In this, FCA and Ford join Nissan and potentially Honda in idling production in the wake of the shortage, which also hit Volkswagen late last year. The shortages are being blamed on consumer demand for silicon after production slowdowns resulting from the coronavirus pandemic. Volkswagen said it had to adjust production schedules in China, Europe and North America to compensate.  Nissan said it planned to reduce production of the Note, a hybrid electric car, at its Oppama Plant in Kanagawa prefecture, Japan, but did not give details of the scale of the output cut. The Nikkei newspaper reported that Nissan would slash its Note production at Oppama to about 5,000 units in January, from an initially planned 15,000 units. "A global shortage of semiconductors has affected parts procurement in the auto sector. As a result of this shortage, the Oppama Plant in Japan will adjust production in January, reducing production of the Nissan NOTE," Nissan said in a statement. (This article contains reporting from Reuters.)     Auto News Plants/Manufacturing UAW/Unions Chrysler Dodge Ford