No Reserve 2004 Dodge Ram 1500 Quad Cab Slt 4x4 on 2040-cars

Auto blog

500+ hp Stellantis 'Hurricane' I6 previews a world without Hemis

After years of rumored development, Stellantis has revealed its new six-cylinder engine family. The 3.0-liter, twin-turbocharged "Hurricane" I6 will offer V8 power, forced induction torque and six-cylinder efficiency in a package designed to fit into any of the company's North American rear-wheel-drive platforms.  What is "V8 power," exactly? Well, in standard output guise, the new I6 cranks out more than 400 horsepower (the specific figure will vary by application) and 450 pound-feet of torque, while the high-output variant is good for more than 500 horses and 475 lb-ft. The final figures will be dependent on the application. We'll save you a little legwork: In current Ram, Jeep and Dodge products, the 5.7-liter Hemi tops out at about 395 hp and 410 lb-ft, give or take, and the 6.4-liter around 485 hp and 475 lb-ft.    This is a clean-sheet design that is only related to the company's turbocharged four-cylinder by some common measurements. The I6 is exclusively direct-injection (no hybrid/port-injection here) and the two I6 variants share 96 common parts, including the block and oil pan design. The differences are found in their internals, intake plumbing, valvetrain components and the turbochargers themselves. Stellantis is not yet ready to share specs or supplier info for the turbos but says announcements will come from its partners soon.  The standard-output I6 has a compression ratio of 10.4:1 and revs to 5,800 rpm. It will run on regular fuel, albeit with reduced performance; 91 octane is recommended for maximum output. The high-output variant has a compression ratio of 9.4:1 and will rev to 6,100 rpm. That one will require premium. The new I6's advantages go beyond basic power output. Every Hemi family engine currently in production is based on an iron block design, so they're heavy. The aluminum-block I6 shaves weight off the total engine package, even if some of that gets added back thanks to the turbos and their associated plumbing. The standard-output I6 weighs 430 pounds, Stellantis engineers told us; the high-output adds just another 11. Fully dressed 5.7-liter V8s are in the 550-560-pound ballpark, and 6.4-liters close in on 600 pounds.  You may be wondering, "Why a clean-sheet gasoline engine now, when the industry is moving toward battery-electrics?" A valid inquiry, and one Stellantis was prepared to address. While the company will be pivoting to electrification over the next decade, it won't be instantaneous.

Speedkore roaring into SEMA with twin-turbo AWD Charger Hellcat Widebody

Speedkore Performance is nowhere near finished with the Dodge Charger. At last year's SEMA show, the Wisconsin-based tuner showed a 1970 Charger Evolution with carbon and aluminum body panels, and a 996-horsepower Hellcat engine yoked to a six-speed transmission. This year the company teased a profile rendering of a 2020 Charger Hellcat Widebody on Facebook with the line, "All we're going to say is this all-wheel drive, twin-turbo, widebody Charger is going to be unveiled at the Magnaflow booth." Mopar Insiders extracted a tad more information, the first being that we're in for another tuned version of the 6.2-liter Demon Hemi V8 that's swapped its supercharger for twin turbos, and produces more than 1,000 horsepower. Last year, alongside that 1970 Charger, Speedkore unveiled a twin-turbo Hellcat-powered Demon making almost 1,400 horsepower. We don't know yet if this year's Charger will match that output — or exceed it — but we have a benchmark. An all-wheel-drive powertrain divides those horses so the tires have a chance of conquering them. Speedkore's mum on the mechanicals; the firm could have swiped a Grand Cherokee Trackhawk AWD unit and beefed it up, or created its own system.  Some of the steel body panels get carbon fiber replacements, and see those two holes in he front wheel arch? Those are exhaust outlets. MagnaFlow created a custom exhaust with a driver-selectable switch to port gases out the front, say at the track when decibels don't matter, or to send waste through MagnaFlow mufflers and out the rear pipes when silence is required.  The reveal happens at the Magnaflow booth in SEMA's Central Hall on November 5. Those that can't make the show can watch the reveal on MagnaFlowÂ’s Facebook page.

Mopar introduces winter tire and wheel packages

Winter is coming, and Mopar will try to help drivers stay safe in the cold weather this year by offering a winter tire and wheel package for a variety of FCA US vehicles for the first time. The packages combine everything drivers need to be prepared for slick roads, including winter tires, steel wheels, and Tire Pressure Monitoring System sensors. Even better, the company delivers them mounted, balanced, and ready for installation. Customers can order the bundles from dealers now. Mopar offers packages with the General Altimax Arctic tire on the Dodge Caravan, Chrysler Town & Country, Jeep Cherokee, and Chrysler 200. All- and rear-wheel drive configurations of the Chrysler 300 get the Michelin X-Ice Xi3, and the all- and rear-drive Dodge Charger models use the Continental WinterContact SI. Depending on the vehicle, prices vary between $242 and $292 per wheel, and Mopar will expand the program to even more models next year. Spending the extra money on winter tires really can make a difference. Experts are clear that the specialized rubber simply works better when the weather gets cold. They can shorten braking distances and improve traction – even with all-wheel drive. Plus, winter tires can often last for more than one year, which spreads out the investment. ALL-NEW MOPAR WINTER WHEEL ASSEMBLIES DELIVER ADDITIONAL COLD-WEATHER CONTROL 01/12/15 from Mopar Print this page Add this release to Your Downloads Mopar winter wheel assemblies include winter tire, steel rim, Tire Pressure Monitoring System (TPMS) Assemblies delivered mounted, balanced, ready to install December 1, 2015 , Auburn Hills, Mich. - Winter is coming and just in time, so are all-new Mopar winter wheel assemblies. The all-new Mopar winter wheel assemblies are available for order for a variety of FCA US vehicles. Assemblies include a winter tire, steel rim and Tire Pressure Monitoring System (TPMS), and are delivered mounted and balanced, so you or your dealership can quickly and easily pop off all-season rims and rubber and put on cold-weather appropriate gear. "Mopar is rolling out our first-ever offering of winter wheel assemblies for those customers who desire a little extra control during the cold weather seasons," said Pietro Gorlier, Head of Parts and Service (Mopar), FCA – Global.