1995 Dodge Ram 1500 4wd Lifted on 2040-cars
Denver, Colorado, United States
Body Type:Pickup Truck
Vehicle Title:Clear
Engine:5.2L 5211CC 318Cu. In. V8 CNG OHV Naturally Aspirated
Fuel Type:Gasoline
For Sale By:Private Seller
Make: Dodge
Model: Ram 1500
Cab Type (For Trucks Only): Regular Cab
Trim: Base Standard Cab Pickup 2-Door
Options: 4-Wheel Drive, Leather Seats, CD Player
Drive Type: 4WD
Safety Features: Anti-Lock Brakes, Driver Airbag
Mileage: 148,233
Power Options: Air Conditioning, Cruise Control, Power Locks, Power Windows
Exterior Color: Gray
Interior Color: Black
Number of Cylinders: 8
Warranty: Vehicle does NOT have an existing warranty
This truck has a good paint job, 37x14 Super Swamper tires (all with excellent tread), 4.56 gearing front and rear, airaid intake, new black interior, XD series wheels, Custom headlights and tail lights, full chrome four point roll bar, bolt on style pocket fender flares, bull-bar, and many other additions. It has the 5.2 V8 magnum engine with 146000 miles. New brakes front and rear, including drums rotors and wheel cylinders. Has a very slow seap from the rear main seal as all Mopar vehicles do, but it is a two piece seal so it is easily replaced. Windshield is cracked, and seat belts are currently uninstalled because they are the original maroon ones, and I planned on getting black or grey ones but never got around to it. Has a small dent by driver door, and it currently has a wiring problem with the right blinker. Other than that the truck starts right up and drives excellent. The 4.56 gearing compensates the 37x14 tires well, as you dont feel any loss of power, even at highway speeds
Dodge Ram 1500 for Sale
2005 dodge ram 1500 laramie 4x4 51,000mi original owner(US $16,000.00)
White quad cab, black interior, oversized tires with tow package(US $7,495.00)
2002 dodge ram 1500 with 12v cummins swap
Slt hemi nerf bars bed liner cd premium wheels power seat cruise air bags
2003 dodge ram 1500 slt 4wd hemi(US $9,950.00)
Lone star slt leather nerf bars bed liner dual exhaust cd premium wheels cruise
Auto Services in Colorado
Tim`s Paintless Dent Repair ★★★★★
Three G Body & Paint Incorporated ★★★★★
Sun Valley Automotive ★★★★★
Sanitaire Parts & Service ★★★★★
Sabaru Import Motors Inc ★★★★★
Rickenbaugh Cadillac-Volvo ★★★★★
Auto blog
Chrysler banks $507 million in Q2, trims 2013 earnings forecast
Tue, 30 Jul 2013Chrysler has some good news and some bad news. First, profits were up 16 percent over the second quarter of 2012, bringing the Auburn Hills, Michigan-based manufacturer $507 million on the back of strong demand for trucks and SUVs (a recurring theme this quarter, particularly in the US). Q2 revenue was up as well, from $16.8 billion in 2012 to $18 billion in 2013. The bad news is that the Pentastar's overall earnings forecast for net income in 2013 has been trimmed from $2.2 billion to between $1.7 and $2.2 billion, according to Automotive News.
In addition to the adjusted net income forecast, Chrysler tweaked its operating profit from $3.8 billion to between $3.3 and $3.8 billion. This has gone largely unexplained by Chrysler, perhaps hoping the news of a three-percent increase in its transaction prices for Q2 will allow it to sweep this adjustment under the rug.
The star of the show for Chrysler has been its US sales, which saw a 10-percent jump, both bettering the industry average of eight percent and improving over the same stretch of 2012. As with the increase in transaction prices, Chrysler has the new Ram pickup and Jeep Grand Cherokee to thank. Perhaps most worrying from this report, though, is that every brand in the automaker's stable saw an increase in sales... except for the Chrysler brand itself.
Chrysler recalling 2009-2010 Ram 1500, Dodge Dakota pickups over axle pinion nut
Mon, 08 Oct 2012Chrysler is issuing a recall for the 2009 and 2010 Ram 1500 and Dodge Dakota pickup trucks due to improper installation of the rear axle pinion nut. According to the National Highway Traffic Safety Administration, a total of 44,300 trucks are affected by the recall, and there have been 12 confirmed incidents including one crash.
The issue on both trucks is that the pinion nut is loosening on some trucks due to a lack of thread adhesive, and it is causing the rear axle to lock up resulting in loss of vehicle control. NHTSA's recall notice says that eight incidents occurred at speeds over 35 miles per hour and most also exhibited driveshaft failures as well since the loss of the pinion nut would cause the gear to separate from the driveshaft. In one complaint, the driveshaft separated from the rear axle and punctured the gas tank.
Chrysler will begin sending out recall notices to affected owners in November, but scroll down to see the official NHTSA notice.
Stellantis invests more than $100 million in California lithium project
Thu, Aug 17 2023Stellantis said it would invest more than $100 million in California's Controlled Thermal Resources, its latest bet on the direct lithium extraction (DLE) sector amid the global hunt for new sources of the electric vehicle battery metal. The investment by the Chrysler and Jeep parent announced on Thursday comes as the green energy transition and U.S. Inflation Reduction Act have fueled concerns that supplies of lithium and other materials may fall short of strong demand forecasts. DLE technologies vary, but each aims to mechanically filter lithium from salty brine deposits and thus avoid the need for open pit mines or large evaporation ponds, the two most common but environmentally challenging ways to extract the battery metal. Stellantis, which has said half of its fleet will be electric by 2030, also agreed to nearly triple the amount of lithium it will buy from Controlled Thermal, boosting a previous order to 65,000 metric tons annually for at least 10 years, starting in 2027. "This is a significant investment and goes a long way toward developing this key project," Controlled Thermal CEO Rod Colwell said in an interview. The company plans to spend more than $1 billion to separate lithium from superhot geothermal brines extracted from beneath California's Salton Sea after flashing steam off those brines to spin turbines that will produce electricity starting next year. That renewable power is expected to cut the amount of carbon emitted during lithium production. Rival Berkshire Hathaway has struggled to produce lithium from the same area given large concentrations of silica in the brine that can form glass when cooled, clogging pipes. Colwell said a $65 million facility recently installed by Controlled Thermal can remove that silica and other unwanted metals. DLE equipment licensed from Koch Industries would then remove the lithium. "We're very happy with the equipment," he said. "We're going to deliver. There's just no doubt about it." Stellantis CEO Carlos Tavares called the Controlled Thermal partnership "an important step in our care for our customers and our planet as we work to provide clean, safe and affordable mobility." Both companies declined to provide the specific investment amount. Controlled Thermal aims to obtain final permits by October and start construction of a commercial lithium plant soon thereafter, Colwell said. Goldman Sachs is leading the search for additional debt and equity financing, he added.