1964 Dodge Dart 270-no Reserve on 2040-cars

Auto blog

Stellantis will give its brands 10 years to prove they deserve to live

Formed by the merger of PSA Peugeot-Citroen and Fiat-Chrysler Automobiles, Stellantis has 14 brands under its roof, a number that makes it one of the largest groups in the industry. Rumors claimed not every brand would survive, with Chrysler often earmarked to get axed, but the firm said it will give them all a chance to shine. "We're giving each (brand) a chance, giving each a time window of 10 years and giving funding for 10 years to do a core model strategy. The CEOs need to be clear in brand promise, customers, targets, and brand communications," announced Stellantis boss Carlos Tavares during the Financial Times' Future of the Car event. His comments confirm Chrysler fans and dealers don't need to worry about the future — at least not yet. And, against all odds, Lancia enthusiasts can breathe a sigh of relief, too. Former FCA head Sergio Marchionne warned of the brand's demise on several occasions. Alfa Romeo is safe for now, too, as is Vauxhall, which are basically just Opels sold in the United Kingdom with a different badge. The engagement made by Tavares also means Stellantis won't divest any of its brands to raise capital until at least 2031. It's now up to each executive team to make a case for the brand they run, an unusual survival-of-the-fittest strategy in an era when cutting costs is more common than spending cash. Diving into the vast Stellantis parts bin should help even the most troubled brands turn their fortunes around on a relatively tight budget. It seems likely that survive Chrysler will need to look beyond the 300 and the Pacifica/Voyager, the only models in its range, and completely reinvent its image, which is currently nebulous at best. Lancia, once the champion of luxury, performance, and innovation, faces the same challenge. It's not starting quite from scratch, it's relatively popular in its home country of Italy, but it will need to think globally and expand outside of the city car segment to survive. Featured Gallery 2020 Chrysler 300 View 24 Photos Chrysler Dodge Fiat Jeep RAM Citroen Lancia Opel Peugeot Vauxhall

Indications of 825 hp and emissions issues for Hellcat called 'speculation' by Chrysler

The 2015 Dodge Challenger SRT Hellcat is probably one of the hottest cars of the moment mostly because of its insane, 707-horsepower supercharged V8. However, there are conflicting reports coming out that the powerplant might be having problems with its emissions compliance and may be capable of even more power.
Jalopnik says that an unnamed source within Fiat Chrysler Automobiles told it that the Hellcat was having problems meeting emissions standards at its 707-horsepower tune. The person claimed that the automaker has been testing the V8 with different types of sensors, possibly to make it a bit cleaner in the future. Autoblog spoke to SRT spokesperson Dan Reid, and he said about the claimed poor emissions, "It's totally speculation."
The source also claimed that the Hellcat had been dynoed at a monumental 825 horsepower, internally. Based on the other rumor, though, it's hard to imagine the engine being emissions compliant like that. Autoblog also asked Reid about this speculation about more power and was told, "They are totally speculating about that."

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat