Super Bee 6.4 Liter 392 Hemi 470 Horse Power on 2040-cars

Auto blog

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.

Armormax loads a bulletproof Dodge Hellcat AWD Police Special

Earlier, we wrote about the Armormax armored Tesla Model S P100D, which International Armoring Corporation called the fastest armored car in the world. As the company also outfits cars such as Dodge Chargers, it's only logical that the showcase car is a SRT Hellcat — but the interesting thing is that the company can also upgrade the Hellcat to all-wheel drive, as Armormax told Motor Authority. When ordering an armored Charger SRT Hellcat, the AWD implementation is just a matter of ticking the corresponding box. The Armormax Charger SRT Hellcat seen here is also outfitted with police patrol car gear, complete with a push bar, run-flat tires, ballistic bulletproof glass and a mean matte black wrap. Even if the 6.2-liter, supercharged Hellcat powertrain probably has no problem hauling an armored bodyshell around, it's likely that the company has used the same synthetic fiber laminate on the Charger as on the Tesla. The bulletproof Tesla's weight gain was a negligible 11 percent, and while the Charger is a lighter car to begin with, avoiding using regular-issue ballistic steel seems to be the way to go if you want to keep the curb weight in check. The Hellcat's battery, radiator, fuel tank and ECU also get their share of protective covering, so that the vehicle is harder to disable. Paneling is available in ballistic protection levels ranging from B4 (can withstand a .30-caliber lead-core softpoint bullet) to B7 (can withstand a 9mm full-copper jacket). And while pricing isn't announced, it is likely to depend on how much protection is applied on the Hellcat and whether all four wheels are powered. A stock one is priced at $65,345. Related Video:

Junkyard Gem: 1964 Dodge Dart station wagon

The Chrysler A Platform, built from the 1960 through 1976 model years for the North American market (and for a few years beyond that in Australia and Latin America), was one of Chrysler's greatest hits, if not the greatest hit. We know these cars best as the 1963-1976 Dodge Dart and the 1960-1976 Plymouth Valiant, and they established a reputation for reliability matched only by the likes of the Mercedes-Benz W123 diesel. I still see many of these cars during my junkyard wanderings, but A-Body wagons have become very rare. Here's a tattered '64 Dart wagon that I spotted in a self-service wrecking yard in San Jose, California. 1964 was the first model year for factory-installed V8 engines in the Dart and Valiant (and the Valiant's sporty sibling, the Barracuda), and the 273-cubic-inch pushrod V8 was a sturdy powerplant indeed. The slant-6 engine, though less powerful, went into most of these cars, and for good reason: It was harder to kill than all the world's cockroaches and rats put together. This car would have come with a 170- or 225-cubic-inch version of the slant-6, optimistically rated at either 101 or 145 gross horsepower (probably about 55 horses at the wheels), but I didn't feel like scraping sludge off casting numbers to see if it's on its first or 11th engine. In any case, slant-6 Darts were on the pokey side but would get you to your destination every time. This one has a lot of rust for a California car (in New Hampshire or Wisconsin, it would be considered pretty solid) and the interior is more or less obliterated, so even dedicated station-wagon lovers wouldn't have been motivated to take it on as a restoration project. So another early Dart is poised to be stuffed into The Crusher, for reasons that make good economic sense. This still makes us sad, though. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Here's the compact you've been waiting for!