1974 Dodge Charger on 2040-cars

Auto blog

Marchionne may stay with FCA until 2020

We might get to see Sergio Marchionne and his vast array of sweaters in the auto industry for even longer than expected. The FCA CEO suggested last year that he would retire from the automaker when its current five-year plan was complete in 2018. Now, he has tentatively extended that point out to at least 2020. "I can do this for another five years if you push me, right? Beyond that, I ain't gonna do it, and I don't want to," he said to Automotive News. That would give Marchionne a 16-year career at the top from joining Fiat in 2004 to possibly leaving FCA in 2020. Although, take the CEO's statement with a grain of salt because he has made multiple statements about the timing for his retirement. In 2012, Marchionne said he would only remain in charge until 2015, which is, well, now. Those five years might also go quite quickly because Marchionne is a busy guy with the Ferrari IPO, the attempted merger with General Motors, implementing FCA's five-year plan, and many other projects. He's already considering the next CEO, though. "My purpose in life is to find the Kuniskises of the world, the Manleys, the Biglands, the Palmers," Marchionne said to Automotive News, referencing the heads at Dodge, Jeep, FCA North America, and the company's chief financial officer, respectively. "I told them, 'One of you is going to do what I do one day. I don't know who that is, but one of you is going to do it.'" News Source: Automotive News - sub. req.Image Credit: Paul Sancya / AP Photo Chrysler Dodge Fiat Jeep Sergio Marchionne FCA fca us Mike Manley reid bigland tim kuniskis

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.

Are you the Dodge Dart SRT4?

Dodge has just confirmed that it will be bringing its newest Dart variant, the Dart GT, to Detroit next week, but we're still in the dark about when we'll see a truly hotted-up SRT4 version. But now, by way of the rumormill anyway, we've got at least one proposed, potentially Dodge-based rendering to light our way.
Seen here is what would appear to be a design sketch of the SRT4 Dart. Obviously the image that has surfaced is of rather low-resolution, but there's at least some evidence to support that it may be legitimate. In the original picture, one can just make out the name Tim Doyle in the lower right corner. As it turns out, Tim Doyle's name is also watermarked on the final design image for the 2011 Dodge Durango Citadel Black & Tan, a model that was shown at SEMA in 2010.
Of course, even if this really is the work of Doyle, there's nothing to say that this image isn't one of a great many potential looks for the future SRT4. In fact, the departure of the cross-hair grille from the Dodge's nose seems like it could be a hard sell, though we do, naturally, dig the sleek hood scoop and the bulked up wheel/tire combination.