2006 Red Dodge Viper Srt-10 Coupe 2-door 8.3l on 2040-cars

Auto blog

Dodge Challenger Shakedown: '71 body, new guts

While Jeep has created a number of vintage-bodied custom vehicles with modern components, this year's SEMA show plays host to Dodge's take on the idea. The Shakedown concept began life as a 1971 Challenger and ditched almost everything in it, including the engine and chassis. What's left is a modern car with a retro look. The chassis was a particularly complicated part of the job, since the Challenger was originally a unibody car. However, Dodge chose to separate the Challenger's iconic body from its structural parts, and moved it onto a custom, one-off chassis from which the body can be removed as needed. The chassis also carries lowered suspension, Challenger Hellcat brakes, and a 6.4-liter 392 Hemi V8 connected to a six-speed manual transmission from the Viper. Dodge also installed the engine using the new Hemi engine swap kit from Mopar. With the shaker cold-air intake and custom exhaust, the Shakedown's powerplant makes 485 horsepower. View 13 Photos The body itself received plenty of tweaking as well. Dodge shaved off the drip rails, door handles, and turn signals for a cleaner look, and also fitted the grille, headlights, and taillights from a 2017 Challenger. The whole thing is finished in matte black paint with a "vibrating" stripe offset on the left side. The Shakedown also gets 20-inch Slingshot rear wheels and a pair of custom 19-inch versions for the front. On each fender is a bright red "392" decal that uses the same font as the labels on classic Mopars 360 cubic-inch V8s. Inside, the Shakedown gets the same radical upgrade as the chassis. Two Viper seats accompany a Viper steering wheel, and the rear seats are gone altogether. The Viper gearbox is shifted with a Challenger Hellcat gear knob, and carbon-fiber accents and leather adorn the wheel, door panels, instrument panel and center console. Related Video: Image Credit: FCA, Joel Stocksdale SEMA Show Dodge Coupe Concept Cars Performance

Dodge Viper saved from crusher by students, but will it last?

The saga of the Washington state community college hoping to keep its allegedly pre-production Dodge Viper out of the maw of the crusher is going strong. Not only does the school still have the car, but there's a chance that the college might even get to keep it.
The whole situation flared up in March when the South Puget Sound Community College in Olympia, WA, received a notice from Chrysler Group that requested that the school's Viper be destroyed. The automaker had loaned the muscle car to it about a decade ago to use for educational purposes in its auto tech classes. With the Dodge growing long in the tooth, "it is unlikely that these vehicles offer any educational value to students," the company said in its press release on the matter.
However, the college balked at destroying its Viper, despite the fact it had signed a contract with Chrysler Group to do so. The school further claimed that its car was incredibly special because it was a pre-production example and just the fourth one made back in 1992. Although, as we pointed out at the time, the photos of the school's vehicle showed a coupe that looked like a newer Viper GTS.

FCA issues recall for 300k Dodge Chargers over airbag sensor

Fiat Chrysler Automobiles has issued another recall, this time for the Dodge Charger. The issue stems from an overly sensitive control module that could deploy the side-curtain airbag and seatbelt pretensioner if the door is kicked or slammed too hard. The recall affects certain Charger sedans from the 2011-2014 model years, specifically those manufactured between May 6, 2010, and June 5, 2014. All told, that amounts to an estimated 322,078 units, including 284,153 in the United States, another 13,169 in Canada, 2,484 in Mexico, and 22,272 overseas. Owners of those vehicles will be asked to bring their vehicles in to their local dealers to have the Occupant Restraint Control module recalibrated, and are being advised in the meantime to "exercise caution when closing doors." If this issue sounds familiar, that's because the automaker issued a similar recall for Ram trucks just last week, affecting over 667,000 four-door pickups in the United States alone. Following a further investigation into its passenger cars, FCA found a similar problem with the Charger, whose door design mandated specific calibration of the module in question for that model. The company says it is aware of three minor injuries potentially related to the issue, but no accidents. This campaign is just the latest in a string of recall-related issues to have emerged from Auburn Hills recently. The Ram truck recall was issued in tandem with another airbag-related recall for a further million pickups. Prior to that it called in another 1.4 million vehicles to update their infotainment system software due to a security issue. Another 350,000 Dodge Journeys were called in before that to have their engine covers secured. The National Highway Traffic Safety Administration is expected to issue the company a massive hundred-million-dollar fine for failing to follow proper procedures related to safety and recall issues. Meanwhile, another NHTSA investigation that could have affected 4.7 million units was closed with no further action deemed necessary. And an appeal court judge in Georgia reduced the damages the company will be ordered to pay the family of a child who died in a fire in a Jeep Grand Cherokee. Statement: Occupant Restraint Control Module August 1, 2015 , Auburn Hills, Mich. - FCA US LLC is conducting a voluntary safety recall to recalibrate control modules on approximately 284,153 U.S.-market sedans to prevent inadvertent side-curtain air-bag and seatbelt pre-tensioner deployment.