2012 Dodge Slt on 2040-cars

Auto blog

Dodge revives Challenger T/A and Charger Daytona trims for 2017

Dodge is reviving the Challenger's T/A trim and the Charger's Daytona line for 2017. Introduced on iconic Woodward Avenue just days before the annual Woodward Dream Cruise kicks off, the new variants promise more performance hardware and sportier aesthetics. We'll start with the two-door. The Challenger T/A, available with either the R/T trim's 5.7-liter V8 or the fire-breathing 6.4-liter Hemi V8, is inspired by the Challenger T/As of old. That means a less restrictive, 2.75-inch active exhaust system and a conical Mopar air filter. But there's no clear bump in output – Dodge still lists the base 5.7-liter at 375 horsepower and the 6.4-liter model at 485 hp. But hey, they're going to look cooler. Unlike the Challenger Hellcat, which should have it as standard, Dodge is including a Satin Black hood on every Challenger T/A. In fact, Satin Black is a recurring theme on this Challenger's front fascia, roof, rear decklid, and T/A bodyside stripes. And yes, the 20-inch Mopar wheels are black, too – they're also an inch wider than normal. Dodge is offering the T/A in three different trims. The base T/A has everything we described above, while the T/A Plus adds some comfort features like heated and vented Nappa leather seats, an 8.4-inch UConnect system with Apple CarPlay/Android Auto, a six-speaker stereo, and a shortcut button for the Dodge Performance Pages. The T/A 392, meanwhile, adds the 6.4-liter V8, even wider wheels, and Brembo six-pot calipers. If you prefer smoking tires with four doors, there's the new Charger Daytona. No, there's not an enormous wing on the back. But Dodge added the same kind of engine/exhaust upgrades found on the T/A while upping the top speed from 135 to 150 miles per hour. Satin Black features prominently again, with hood and rear fender graphics. The roof is also black. Unlike the Challenger, Dodge is only offering two different versions of the Daytona – the 5.7-liter base model and the 6.4-liter version, called the Daytona 392. Prices for the Challenger T/A start at $38,485, including a $1,095-destination charge, while the T/A Plus adds $2,750. Adding the 392 means shelling out $45,090. For the Daytona, you'll need a check for $40,985 for the 5.7-liter or $46,090 for the 6.4-liter. Orders for the Charger Daytona open in September, while the T/A is a month later. Related Video:

Fiat Chrysler faces $79 million U.S. penalty for fuel economy shortfall

WASHINGTON — Fiat Chrysler Automobiles NV on Wednesday said it faces a $79 million U.S. civil penalty for failing to meet 2017 fuel economy requirements, as regulators reported more automakers were falling short of U.S. greenhouse gas emissions standards. The Italian-American automaker said the payment is not expected to have a material impact on its business. Of 18 major carmakers in the United States, 13 including Fiat Chrysler failed to comply with fuel economy and greenhouse gas emissions standards for the 2017 model year without using credits, according to the National Highway Traffic Safety Administration (NHTSA). The agency said its review of model year 2017 vehicles showed "automakers falling further behind current standards." The 2017 model fleet fell 1 1/2 miles per gallon short of the 33.8 mpg standard based on yearly performance without including credits, NHTSA reported. The shortfall was a half-mile per gallon for the 2016 model year. NHTSA said more automakers were failing to comply with standards for the 2018 and 2019 model years, "and the potential penalties on automakers, which are passed along to consumers, are expected to continue to increase." The Trump administration has used the widening gap between the emissions of automakers' U.S. fleets, which are skewing toward larger vehicles, and national vehicle CO2 emissions standards to bolster its case for freezing vehicle emissions and mileage standards at current levels through 2026. Environmental groups and regulators in California and other states are fighting against any rollback in standards, saying tough rules are needed to address climate change and reduce consumer outlays for fuel. NHTSA and the Environmental Protection Agency are working to finalize as early as next month a rewrite of the Obama administrationÂ’s fuel efficiency requirements, which call for sharp reductions in fleet-wide emissions by 2026. Fiat Chrysler is paying fines for the shortfall in its domestic passenger car fleet, which includes several front-wheel-drive Jeep and rear-drive Dodge SUVs and some sedans and muscle cars. The automaker killed its slow-selling domestic small and midsize sedans. After paying $77.3 million last year for a 2016 model year fuel-economy shortfall, a Fiat Chrysler spokesman confirmed Wednesday the company had received a letter on the 2017 penalty and has 60 days to pay the fine.

FCA to invest $4.5B for new Detroit plant, expanded production at current facilities

We expected some shifts in manufacturing plans as Fiat Chrysler plans to begin electrifying its Jeep brand, but this news bodes well for Michigan. FCA announced today that it would spend $4.5 billion to expand production in the state, including building a new assembly plant in Detroit and increasing capacity at five other facilities in the state. The plan, which FCA says will create nearly 6,500 new jobs, will help to meet increasing demand for Ram and Jeep products, and to electrify Jeep models. $1.6 billion will be set aside to transform the Mack Avenue Engine Complex into a site to build the next generation of Jeep Grand Cherokee, as well as an unspecified, new three-row Jeep model. FCA says this part of the plan will create 3,850 new jobs. FCA is increasing its investment in the Warren Truck plant to $1.5 billion in order to continue building the Ram 1500 Classic, as well as the new Jeep Wagoneer and Grand Wagoneer, creating 1,400 new jobs. FCA says that the new Ram 1500 Heavy Duty will still be built in Saltillo, Mexico. At FCA's Jefferson North facility, the automaker will invest $900 million to upgrade the plant. This site will continue to build the Dodge Durango, as well help build the next Jeep Grand Cherokee. FCA expects this to create 1,100 new jobs. As Jeep plans to electrify models in its SUV lineup, each of the above plants will produce plug-in hybrid versions of the Jeep models produced there, "with flexibility to build fully battery-electric models in the future," the company said in its announcement. "Three years ago, FCA set a course to grow our profitability based on the strength of the Jeep and Ram brands by realigning our U.S. manufacturing operations," said FCA CEO Mike Manley, referring in part to earlier investments in Illinois, Ohio and Michigan. "Today's announcement represents the next step in that strategy," Manley continued. "It allows Jeep to enter two white space segments that offer significant margin opportunities and will enable new electrified Jeep products, including at least four plug-in hybrid vehicles and the flexibility to produce fully battery-electric vehicles." Other investments include $119 million to move production of the 3.0-, 3.2- and 3.6-liter Pentastar engines from Mack I to the Dundee Engine Plant, and $400 million for increased capacity and 80 new jobs at the Sterling and Warren stamping plants. This comes at a time when FCA's U.S.