Laramie Leather Pwr Opts Cruise Black Fuel Alloys 35's 5.9l Cummins Diesel 4x4 on 2040-cars

Auto blog

Dodge vs. Chevy tug-of-war taken to the extreme

They say "idle hands are the devil's playground," but said playgrounds grow to Disney-sized proportions when a pair of jacked-up trucks, two egos, a chain and an empty mall parking lot are involved. Proof of this is the video below, which shows a Cummins-powered Dodge Ram circa 2006 to 2008 chained tail-to-tail with what looks to be a gasoline-powered Chevrolet Silverado from the late 1990s or early 2000s.
We don't necessarily have to tell you who wins this battle, but we'll let you see for yourself the lengths the "winning" driver goes to prove his point. There's plenty of foul language in the video below, so beware that this might be Not Safe For Work, and not that we should have to tell you, but please, do not try this at home.

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.

Before Jay Leno, this 1970 Dodge Charger was a SEMA star

When Jay Leno drives an awesome car, enthusiasts take note, and this week the internet blew up over the 1970 Dodge Charger resto-mod that starred in a recent Garage episode. But you might not remember: this strapping Charger, called "Tantrum," was one of the highlights of the SEMA Show in Las Vegas last fall. Here's another look at a true Mopar monster. The power: Yep, Tantrum has 1,650 horsepower. That's more than two Hellcats worth of power under the hood. It's a twin-turbo 9.0-liter Mercury Racing engine with a quad-cam four-valve setup. Basically, it's a V8 boat motor developed for cars. Mercury Marine is the crew that developed the V8 for the 1990s Chevy Corvette ZR-1. That all-aluminum LT-5 under the hood cranked out 405 hp – an astronomical figure for the time – and helped make the ZR-1 an icon. Take a listen to Tantrum's 9.0-liter Mercury mill below. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Who's behind all of this? SpeedKore, a Wisconsin-based performance shop that does one-off pro touring builds. It specializes in remaking Detroit muscle with modern features like carbon fiber, bespoke interiors, and powerful engines. SpeedKore is pretty good at it. Before it threw a Tantrum, it did the "Cudinator" used in some of the Fast and the Furious movies. You might not know: Tantrum won the Best Domestic category of the GT Awards at SEMA – chosen by your author. The sinister looks were the hook, and the crazy engine solidified its performance cred. Related Video: Image Credit: SpeedKore Design/Style Dodge Coupe Performance Videos Jay Lenos Garage 1970 dodge charger resto mod