Lifted 2008 Dodge Ram 1500 Mega Cab Slt....lifted Dodge Ram Mega Cab 5.7l Slt on 2040-cars

Auto blog

Dodge celebrates centennial with Charger and Challenger 100th Anniversary Editions

In 1914, the Dodge brothers went from being a parts supplier to a full-scale automaker, and to celebrate the centennial of this milestone, Dodge will offer special editions of the 2014 Charger and Challenger early next year. Both cars will be sold in limited numbers (although no specific number was given), and these cars will stand out thanks to unique touches like 20-inch wheels, 100th anniversary edition logos and the exclusive High Octane Red Pearl Coat paint job (shown above).
The 100th Anniversary Edition package, which runs $2,200 on the 2014 Charger and $2,500 on the 2014 Challenger, comes with red or black leather seats with a cloud print (for a denim-like look) and metal badges on the seatbacks that read "Dodge Est. 1914," while similar logos are also found on the wheel center caps and front fenders. The instrument gauges are unique to each car, with the Charger getting black gauges and the Challenger getting white gauges, and to enunciate the 100-year anniversary, both cars have red numerals on the speedometer for the 100-mile-per-hour mark.
Finishing off the 100th Anniversary Edition cars, which will be offered on V6 and R/T models, Dodge adds a flat-bottom steering wheel and embroidered floor mats as a part of the package. Scroll down for the full press release for these commemorative models.

Dodge recalls 2011-2016 Charger to give owners wheel chocks

A bizarre new recall gives wheel chocks to Dodge Charger owners so that people remain safe while changing the sedan's wheels. The campaign covers 441,578 examples of the 2011-2016 Charger in the US; plus 19,229 in Canada; 4,969 in Mexico, and 38,947 outside the NAFTA region. According to Dodge's announcement, owners should use the chocks to stabilize the Charger when using a jack to change the wheels, like in the case of a flat tire. Without them it's possible for the sedan to fall off the jack. The company is aware of three minor hand injuries from this problem. Dodge will notify owners by mail when they can pick up the free wheel chocks. FCA US spokesperson Eric Mayne offered Autoblog a more detailed explanation about this recall. "The body structure of this vehicle is unique. If owner's manual instructions are not followed, slippage may occur. Chocks are being provided to help ensure the instructions are followed," he said. "We are continually analyzing warranty data to identify ways to improve the ownership experience. When tire-jack data was reviewed, we identified a need to further assist our customers." Statement: Wheel Chocks February 3, 2016 , Auburn Hills, Mich. - FCA US LLC is conducting a voluntary safety recall to supply wheel chocks for an estimated 441,578 full-size sedans in the U.S. The chocks are for use, as instructed in the vehicle's owner's manual, when employing a tire jack to change wheels. When positioned diagonally opposite to the wheel being changed, the chocks will help stabilize the vehicle. Failure to follow the manual's instructions with an affected vehicle may cause the vehicle to come off the tire jack. FCA US is aware of three related injuries – all minor. The recall is limited to 2011-2016 Dodge Chargers. Also affected by the campaign are an estimated 19,229 cars in Canada; 4,969 in Mexico and 38,947 outside the NAFTA region. Recall notices will advise affected customers when they may obtain their wheel chocks, which will be supplied free of charge. Customers with questions or concerns may call the FCA US Customer Care Center at 1-800-853-1403.

We're pretty sure the Challenger SRT Demon won't have 1,121 horsepower, but what if?

Dodge's slow rollout of the upcoming Demon continues, and with it comes endless speculation about what it all means. Every video, every image, and every press release contains some clue that points towards the Demon's final specs. We don't think any of it is random or arbitrary. This week cryptic image, a small plate with a name and two numbers, shows us a little more than last week's license plate. Unfortunately, Dodge will neither confirm or deny anything, meaning we have no way of knowing which rabbit hole to go down. Don't expect to see official horsepower, a quarter-mile time, or an MSRP until the New York Auto Show. The plate is attached to the crate of goodies that comes along with every Dodge Demon. This particular one is labeled with three things: Tom Coddington, serial number 0757, and VIN 001121. The name is simple enough. According to Hot Rod, Coddington was one of the original Ramchargers, a group of engineers in the early 1960s that helped Dodge get involved in drag racing. He was a fuel system specialist, motor consultant, and a rotating garage manager. All of that could be clues. While a name is easy enough to Google, the two numbers can't be broken down so easily. The crazier theory is that the car makes 1,121 horsepower and will do the quarter-mile in 7.57 seconds. Frankly, those numbers are about as likely as the Demon actually being powered by a Rolls-Royce turbofan engine from a Boeing 757 or packing a carburetor with 1,121 CFM. The Demon is going to be street legal, and the costs associated with making a 1,121-hp car meet emissions standards alone are assuredly astronomical. As our friends from Road & Track pointed out, the more likely theory is that 757 is actually the horsepower rating. This seems totally plausible, but it means we still don't know what 1,121 means. Surely it's not a drag strip time, as the standard Hellcat will do 1/4 mile in 11.2 seconds. Like before, if you have any ideas, post them in the comments. Until April, we'll keep trying to solve Dodge's demonic puzzle. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. News Source: Road & Track, Hot RodImage Credit: FCA New York Auto Show Dodge Coupe Performance dodge demon dodge hellcat