1949 dodge 1/2 ton panel van
1968 dodge sweptline d200 camper special truck long bed rat rod project(US $1,500.00)
1973 dodge pick up 1/2 d-100 v-8 auto long bed
1992 dodge ext cab d-350 dually 2wd cummins 5-speed nice truck !!!!!
1975 dodge 4x4 classic mopar rat rod shop truck
1976 dodge club cab 200 46,417 miles act miles stored since 1990(US $4,250.00)
1968 dodge custom lowrider ratrod longbed pickup with 455 buick and turbo 400(US $3,450.00)
52 dodge "job rated" shortbed "body-off restoration"
1983 dodge d50 royal turbo diesel intercooler 4wd 5 speed,mitsubishi mighty max
1959 dodge d300 9' long bed 1 ton truck all original second owner low miles
1977 dodge d200 crew cab d code 440 big block matching number original 2wd d100(US $1,900.00)
*** all original 1966 d100 custom truck and era camper shell ***
1938 dodge truck resto mod custom express hot rod call in offer now(US $32,495.00)
1960 dodge d-300 tow truck(US $6,500.00)
1953 dodge truck
1979 dodge lil red express truck 40,000 miles(US $27,995.00)
1985 dodge shortbed 318 w-auto transmission(US $2,500.00)
1975 dodge d200 pickup, 2wd, v8, auto, nice, no reserve
1979 dodge little red truck, incredibly original, rare factory bucket seats!(US $29,900.00)
1939 custom dodge hot rod(US $48,500.00)
1967 dodge d200 cummins turbo diesel p-pump 5 spd chevy ford gmc
1977 dodge warlock
1933 dodge pickup, very rare, full restoration, suicide doors, chopped(US $44,500.00)
1954 dodge stepsde 1/2 ton 5 window job-rated pick-up w/ diamond plate steel bed(US $6,900.00)
1950 dodge powerwagon(US $3,750.00)
1988 dodge ram 250 3/4 ton solid heavy duty truck!(US $1,700.00)
1970 dodge a100 truck rare! 318 v8, 727 auto, california truck!!! runs great!!!
1946 dodge wd-21 pickup truck(US $5,000.00)
1952 dodge pick up
1967 dodge 100 pick up truck 318 2 barrell engine all original 31000 miles used
1947 dodge 1/2 ton pick up truck
58 dodge stepside(US $10,000.00)
"little red express" well preserved/restored 51,496 miles american muscle truck
1968 dodge a-100 pick up mopar truck(US $24,700.00)
1971 dodge d100 custom pickup 71 truck 440 sweptline
1946 dodge panel van street rod project
90 dodge 4x4 440 lifted mud pulling farm truck sharp & dependable(US $6,500.00)
1935 dodge pick up truck,rare,hot rod, custom,patina,(US $12,000.00)
1987 dodge tow truck
1947 dodge truck hot rod!!
1936 dodge pickup
1985 dodge truck d150 short bed , 440 big block , 727 trans , fast , wrecked
Dodge coe 1947, cabover , original
Ram charger ford f150 chevrolet silverado mexico sinaola ramcharger 4x4 lowered
1947 dodge pickup
1987 dodge power ram custom 100
1979 dodge lil red express truck survivor highly documented
1974 dodge d800 medium duty truck original oleynik rod shop race car hauler 413
*** all original 1966 d100 shortbed hotrod shop truck ***
1949 dodge (milk truck)
1927 dodge graham brothers screen-side canopy pickup, restored california truck(US $18,500.00)
1967 dodge css d100
1973 dodge adventurer d 100 truck pickup 400 automatic(US $3,900.00)
1993 dodge ram 350 dually 12v cummins diesel with 5 speed 116k miles!(US $10,500.00)
1937 dodge truck
1964 dodge d200 crew cab pick up rare!!
1986 dodge d100 customized pickup(US $7,900.00)
1977 dodge m882 5/4 4x4 pickup truck
1976 dodge club cab 200 46,417 miles act miles stored since 1990(US $4,250.00)
1990 dodge w250 base extended cab pickup 2-door 5.2l(US $3,000.00)
Auto blog
Dodge reveals a few of the goodies in the Demon crate
Tue, Mar 14 2017One of the teaser trailers for the eagerly anticipated Dodge Challenger Demon featured a big crate full of goodies for the car. As with the car, though, Dodge was a bit coy about what was inside, simply saying there were 18 items, consisting of tools and parts. Now we know what tools the car gets, and they're some very nice Snap-On pieces. All of the tools and accessories are branded with the Demon logo. And the tools included should be perfect for easy tire changes at the track. Specifically, the tools include a hydraulic jack, cordless impact wrench with charger, torque wrench, and a tire pressure gauge. There's also a fender cover to protect the paint when working under the hood, and a nice carrying bag with the Demon emblem on the side. And, naturally, all of the tools are limited-edition units made specifically to accompany the Demon. If you want to do anything more involved than wheel swaps, you'll need to supply a few tools of your own. But this should be good for the weekend drag racer or autocross driver who wants to drive down to the course on street tires, then throw on the sticky rubber at the track. Also, as you may have noted, these tools only constitute six items in Dodge's count, leaving 12 others that must be car parts. We know that among the parts are some factory Demon wheels, and items that Dodge describes as "Direct Connection Performance Parts" and the "Demon Track Pack System." Details on these remain scarce, but they will probably be revealed closer to the car's debut date of April 11. Related Video:
'Baby Driver' is a car chase movie set to music
Mon, Mar 13 2017The Fate of the Furious is certainly the 6,000-pound SUV in the garage of automotive movies, but that doesn't mean gearheads are starved for options. The upcoming film Baby Driver looks to be a winner for car guys, featuring exciting chases with cars including a "hawk-eye" Impreza WRX, a Dodge Challenger, and a 1980s Chevy Caprice. The movie is written and directed by Edgar Wright, whom you may know as the man behind movies such as Sean of the Dead, Hot Fuzz, and Scott Pilgrim vs. The World. And based on the two trailers released so far, seen above and below, it's about a young man by the name of Baby, who is a getaway driver for criminals. He's apparently the best in the business, and the secret to his success is the music he listens to while he's driving. He also wants out, but his boss, played by Kevin Spacey, has no intention of letting him go. Spacey is one of a number of major stars in the film, including Jamie Foxx and John Hamm. The driving action shown in the trailers definitely looks entertaining. The WRX is seen doing an array of drifts and J-turns. There is some driving precision on display here that wouldn't be out of place in a Gymkhana video. And it looks like Wright's attention to detail in his shots and transitions, as well as some solid comedy relief, are all going to be present. The film comes out this August. Related Video: News Source: Sony Pictures Entertainment / YouTube via Road & TrackImage Credit: Sony Pictures Entertainment / YouTube TV/Movies Chevrolet Dodge Subaru Videos baby driver
Everything is absurd in Fate of the Furious, including the car hacking
Fri, Mar 10 2017Truly ridiculous and absurd scenes and situations are a staple of the Fast and Furious series, And earlier trailers made it clear that Fate of the Furious wouldn't be any different as soon as the submarine appeared. However, it turns out the craziness has spread to the topic of car hacking. The hacker is Charlize Theron's character, Cipher, and she can apparently control any car in the world, and many of them at once. She uses this to great effect in creating giant rivers of rampaging automobiles through city streets, and waterfalls of cars flying off of parking structures. And if you look closely at these groups of vehicles, it is evident that she can even control older cars that have no automated steering or throttle capabilities whatsoever. We would ask how that works, but we know that's a silly question in the Fast and Furious universe. After all, this is the series that featured Dominic Toretto flying through the air over a freeway to catch Letty Ortiz and land on another car. And they survived. Your logic has no power here! We also noticed that Cipher seems to have a preference to hack vehicles from Fiat Chrysler. In the trailer, multiple Chrysler 300s, a Jeep Cherokee, a Jeep Grand Cherokee, and a Dodge Challenger all get some prominent screen time when they're being hacked. We're not so sure this is good product placement for the brand, particularly considering this is the same company that recalled over a million vehicles to fix a software issue that could lead to hacking. Maybe this is the trade-off for having the Dodge Challenger Demon as a hero car. There's more to this trailer than Chryslers and hacking though. It turns out that Cipher has been following Toretto for a few movies now. Also, characters fly with jet packs, and Dwayne "The Rock" Johnson's character shoves a torpedo out of the way, on ice, while hanging out of a truck. Check it all out in the video above. Related Video:
A look at the Dodge Demon's drag settings, modes, and go-fast tech
Thu, Mar 9 2017In the same video that gave us a peek at the 2018 Dodge Challenger SRT Demon's performance stats, there's a serious dump of info on the tech and tools that will likely help this muscle coupe slaughter drag strips. Dodge has outlined a few of them for us and we're using the power of inference to figure out the rest. Here's what we've gathered. A lot of these hints come from the Demon's version of Performance Pages, the infotainment screens that show what SRT models are doing and let the driver change the powertrain and chassis setup. There are a lot of Demon-only features, including line lock, a quick cooldown mode for the supercharged engine, and data recording. And of course there are pages to show a digital time slip with acceleration and braking figures, a g-load plot, and lots of gauges to track temps and levels. The engine output is shown in the video on a special Dyno page. It tracks horsepower and torque over time on the upper graph, and engine rpm and shift points on the lower graph. And we think it's still hiding something. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Any good drag car has a line lock, allowing the driver to lock the front brakes and leave the rears free to do a nice tire-warming (or tire-shredding, depending on length) burnout. Ford has it on the Mustang, Chevy puts it on the ZL1, and now Dodge is adding it to the Demon. It should help get the giant Nitto tires up to temp for a drag run. And once the tires are warm, there's launch control, just like on the SRT Hellcat, with selectable rpm to dial things in for the conditions. The Demon also has a shift light in the cluster, and the driver can set a shift point individually for each gear. After each drag run, you can activate Quick Cooldown, which Dodge says uses the first production application of After-Run Chiller – it runs the cooling fan and intercooler coolant pump with the engine off until the coolant reaches its target temp. It's shown in one of the slides above. The checklist on the left side of that page suggests it requires a set of conditions be met to work: engine off, hood open, and sufficient battery level. This further reinforces our theory that the supercharger is going to make big boost, beyond the Hellcat's 11.6 psi. And while you're waiting for the supercharger to cool off for another run, you can review the performance data the car records.
Here are the Challenger SRT Demon's bare-minimum performance numbers
Thu, Mar 9 2017This week's Dodge Challenger SRT Demon teaser video provides what seems like more concrete evidence than any of the others before it. We say it seems that way because the numbers flashed on the screen are likely not showing us everything the car has to offer. So we're looking at these as the minimum performance stats and expecting Dodge to reveal even crazier numbers alongside the car next month. The video also provides some hints at features and modes the car will offer. Let's pick it apart. First off, there's the performance data from the various SRT Performance Pages screens. The 0–60 mph time is 3.0 seconds, which compares well to the "regular" Hellcat's 3.5-second manufacturer claim. Then there are two 0–100 times: 6.08 and 6.8. An eighth-mile time of 6.6 seconds at 125 mph and a quarter-mile time of 0.5 seconds at 129 mph lead us to believe the driver lifted off the throttle in that second eighth-mile and that the car will actually do the quarter in the low 10s. For reference, Dodge claims an 11.2-second quarter for the Hellcat on its street tires and a 10.8 with race slicks. View 7 Photos We also get a cryptic message about the supercharger boost pressure, which suggests it will be higher than the 11.6 psi of the 6.2-liter Hellcat engine. A graph shows it heading up toward 10 psi but the final spike is obscured by a Demon head. Cute. There's a hint at horsepower and torque numbers in a graph on the Dyno page, which shows both peaking around 750. In every shot of this video, the clock is set to 7:57, which we think means it either has that much power or, well, more. We think there's more to it because it appears that part of the graph above the dyno run shown, which would reach to 800 or 850, has been blanked out. A horsepower total of 808 would be a nice complement to the Hellcat's 707, don't you think? We can see from the shift indicator screen that the car will come with or at least offer the eight-speed automatic that's also available in the Hellcat and other Challengers. That's likely to be the best option for drag racing. The Demon's user-defined shift light feature, which lets you choose an optimal shift rpm for each individual gear, also suggests that a six-speed manual will be available. We'll cover the many modes and settings highlighted in this video in a separate post. There's a lot to discuss. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.
Junkyard Gem: 1963 Dodge Dart two-door sedan
Mon, Mar 6 2017The 1963-1966 Dodge Dart, sibling to the Plymouth Valiant, was sturdy, cheap, and easy to drive, and it sold very well. Here's a worn-but-solid example of the two-door '63 Dart sedan, spotted in a Denver-area self-service wrecking yard. The only transmission choices for the Dart this year were a three-speed manual and an automatic controlled by Chrysler's famous dash-mounted pushbutton shifter. These shifters worked surprisingly well, even when used for road racing. Starting in the 1964 model year, the Dart could be purchased with a 273-cubic-inch V8 engine, but in 1963 Dart buyers had but two engine choices: a slant-6 displacing 170 cubic inches and good for 101 horsepower and a slant-6 displacing 225 cubic inches and making 145 horsepower. This car has the big engine. This is one of the most reliable engines to come out of Detroit, period. The interior is pretty beat, but the metal isn't rusty. You'd think that someone would have rescued this car long before it came to this sorry end, but perhaps Dart restorers only want numbers-matching V8 cars these days. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. "The new kind of compact in the large economy size."
The Fate of the Furious music video shows how much Demons love donuts
Fri, Mar 3 2017The new Dodge Demon is leaking into everything related to The Fate of the Furious in the lead-up to both the car and the film's debut in just over a month. The latest teaser involves Demons doing donuts and burnouts in the Get Off music video, with copious amounts of both tire smoke and hip hop to accompany the tire-shredding shenanigans. It also gives us a look at some of the film's other cars. Get Off is a song by Travis Scott, Quavo, and Lil Uzi that's featured on The Fate of the Furious soundtrack, which is out now. The teaser for the music video features a pack of Dodge Challengers - both Demon and non-Demon spec - along with a line of non-SRT related products. From what we can see, the movie will have a Scion FR-S/Toyota 86, a highly modified C2 generation Chevrolet Corvette, and a Mercedes-AMG GT S. In typical over-the-top fashion, the final shot shows a submarine bursting through ice in pursuit of several cars, including a Subaru WRX. We can't see much else as the full music video hasn't been released, but expect a few more teasers once it does. The Fate of the Furious debuts Friday, April 14, just days after the Dodge Demon's debut at the New York Auto Show. Related Video: News Source: Jetlag on Twitter TV/Movies Chevrolet Dodge Toyota music music video dodge hellcat the fate of the furious
Get a peek at the Dodge Demon in the new Fate of the Furious trailer
Thu, Mar 2 2017Will all of the news that comes out, Thursdays should now be referred to as Demon Days (no relation to the 2005 album by Gorillaz), at least until April. In addition to this morning's news on the Dodge Demon's Launch Assist and beefed-up components, the automaker released a trailer/commercial for The Fate of the Furious that shows a Dodge barrage and a few quick looks at the new car. The film, which opens days after the Demon's debut at the 2017 New York International Auto Show, is packed full of Dodge, SRT, and FCA products. While the few cars shown in the garage look superficially like Demons, they appear to just be standard Hellcats – the hood is wrong, and they are missing the fender flares. On the other hand, the ones in the trailer's chase scene appear to be the real deal, or at least made to look like it, with the big AirGrabber hood scoop and wide-body fender flares. We've seen a few of these cars already on the film's set, so this is no real surprise. The ad itself is a bit strange. The shots of the woman standing in front of the SRT lineup appear to be cut into footage from the film, so she's not actually talking to the cast in these scenes. That's why a narrow-body car bursts through the wall and becomes a wide-body Demon-like thing. Well, the Fast and Furious franchise was built on bad dialog and over the top car stunts, so par for the course? The film debuts on April 14, and expect the Demon around that time, too. Related Video: News Source: Dodge/YouTube TV/Movies Dodge Performance dodge demon dodge hellcat the fate of the furious
Dodge Demon makes so much torque, it needs stronger driveline parts
Thu, Mar 2 2017Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat
Is your new-car warranty good at the race track?
Mon, Feb 27 2017We've all heard the horror stories. Your buddy knows a girl that was dating a guy whose best friend's brother once broke his brand-new, recently purchased performance car while making runs at a drag strip or laps at a track day, and the manufacturer wouldn't cover the repair under warranty. True story? Urban legend? Complete crap? Yes, no, maybe. One thing's for sure: Automotive warranties have always come with caveats. In 1908, an ad in the Trenton Evening Times clearly stated: "All Ford Cars Guaranteed for One Year." Although it changed over time, by 1925 the Ford New Car Guarantee only covered 90 days on material and 30 days on labor, and it clearly stated that that there was "No guarantee whatever on Fan Belts, Glass, Bulbs, Wiring, Transmission, Bands, Hose Connections, Commutator Shells, Rollers, Spark Plugs or Gaskets." Whether or not Ol' Henry would pay to fix your Model T if you broke it shaving a tenth off your lap time at the local board track seems to be lost to history. We're guessing no. But what about today? Do new-car warranties in 2017 cover cars when they are driven on race tracks? We researched the warranties of 14 auto brands to find out, and the answer is yes, no, maybe, depending on the brand, in some cases the model, and whether or not your car is modified from stock. Acura has been out of the high-performance car game for a number of years, but jumps back into the party in 2017 with its hybrid-powered $173,000 NSX supercar. And Acura's warranty, as well as Honda's, clearly states that it does not cover "the use of the vehicle in competition or racing events." View 33 Photos So we asked Sage Marie, Senior Manager of Public Relations for Honda and Acura. "If the car is stock, the warranty covers it on a track just as it does on the street. No question," he told us. "However, if the car is modified, say with slick tires or other components that would put higher stresses on the vehicle's parts and systems, then we would have to investigate the circumstances further." Marie went on to say the same would be true for any Acura model or Honda vehicle, including the new 2017 Honda Civic Si. This became a common theme. Chevrolet actually started this practice with the fifth-generation Camaro on the high-performance ZL1 and Z/28 models.