2008 Dodge Nitro Sxt 3.7l V6 Engine 4x4 Sport Utility Very Good Condition on 2040-cars

Auto blog

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.

2013 Dodge Dart GT

My younger brother bought a Dodge Dart earlier this summer. It's a basic SXT, in Maximum Steel Metallic, with the 2.0-liter engine, a six-speed automatic transmission and not a whole lot else. Unfortunately, at the time, the Dart was one of the few cars in the compact class I'd never driven. I didn't know a lot about it, and therefore, didn't have a lot to say when he bought it. I think the words "based on an Alfa," popped out when I first saw it.
As it turns out, he's grown quite fond of the dark gray sedan, so it was with some degree of enthusiasm that I paid him a visit in this bright-orange Dart GT. I was excited to see what it was about the Dart that he enjoyed so much, despite my tester featuring a different engine, transmission and a lot more tech. After a week with the car, though, I must say: I don't quite see what all the fuss is about.
Driving Notes

Ralph Gilles shares how he imagined a modern-day Dodge Rampage in 1995

Fiat-Chrysler Automobiles (FCA) design boss Ralph Gilles kicked off the company's 24-hour Design Sketch Battle by sharing an image of a mini-truck he drew in 1995. Called Tomahawk GTR, it never reached production. Gilles sketched the Tomahawk GTR when he was about 25 years old. He was a designer at the time, he wasn't promoted to a managerial position until 1998, and his obsession with performance already permeated the cars he drew. The Tomahawk GTR takes the form of a two-door, two-seater pickup with a muscular-looking front end, pronounced wheel arches, and a sizable spoiler over the cargo box. The wheels look almost Porsche-like. "I guess I was dreaming up a modern-day Rampage back then. This must be what happens when a want-to-be racer draws a truck," he wrote on his Instagram page, referencing the small, unibody pickup Dodge made from 1982 to 1984. His sketch moved the company's then-current design language in a sportier direction. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Dodge hasn't released a successor to the Rampage yet, at least not in the United States. The Fiat-based 700 that sister company Ram sells in Mexico is the closest thing available in 2020, but there's no indication it will be sold in America anytime soon. The firm used the Tomahawk name on a Viper-powered motorcycle concept introduced in 2003, and it dusted it off again for an SRT design study created in 2015 for Gran Turismo.  We may see a Rampage for the 2020s emerge from the Design Sketch Battle. The photo accompanying FCA's announcement depicted a Dodge Challenger Hellcat turned into a pickup and fitted with a front end borrowed from a Ram 1500. The contest's winners will be announced on Instagram today.  Instagram has recently turned into a window through which enthusiasts can peek into Gilles' mind. He published a futuristic-looking sketch in March 2020 that poked fun at the Charger and Challenger owners who leave the yellow protective stripes on their car while potentially shedding light on Dodge's next design language. Design/Style Dodge Truck