We Finance 07 Slt 4x4 3rd Row Leather Seats Cd Changer Rear A/c Keyless Entry V8 on 2040-cars

Auto blog

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.

2003-04 Dodge Viper recalled for sudden airbag deployment

As if driving the old Dodge Viper (not the fancy new SRT model) isn't intimidating enough, imagine trying to wrangle that V10 beast and then suddenly having the airbags deploy. Yikes. That's apparently what could happen to some 3,660 Viper models from the 2003 and 2004 model years, and as such, Chrysler has issued a recall.
According to the National Highway Traffic Safety Administration, part of the car's airbag control module may fail, causing the bags or seatbelt pre-tensioners to deploy without warning while the vehicle is in operation. That's a dangerous scenario in any car, let alone one offering insane horsepower a near-total paucity of safety nannies should things get squirrely.
Owners will be notified this month about the recall, though a remedy is not expected to be available until later this year. Scroll down for the full NHTSA statement.

2019 Dodge Challenger Hellcat with twin-scoop hood spied with no camouflage

Dodge recently teased an updated 2019 Challenger SRT Hellcat sports coupe complete with an all-new hood with dual scoops. It didn't reveal anything else about the vehicle, saying more details were coming. And now we have more details, but not in the way Dodge probably wanted. We can now see the updated Hellcat with the new hood. To be perfectly honest, it's pretty much what we expected. The teaser photos indicated that the hood was the only major body change, and this car confirms it. The rest of the body is identical to a normal Hellcat. The bumpers, grille mesh, even the wheels are all standard Hellcat parts. Even the slotted rotors and Brembo calipers look the same. This car does suggest that the hood will be available on both the narrow-body Hellcat and the Hellcat Widebody, the latter of which was featured in the teaser images. There is actually one other minor difference on this 2019 Hellcat's exterior, and that's the grille badging. There's now a vintage-style badge with "Challenger" written in script off to one side. Currently only one grille and badge design is available on Hellcat, and it features just the SRT Hellcat logo. It appears the SRT badge is still present, but blocked off on this prototype. So it's possible this new badge comes with the new hood as a sort of retro package for Hellcat. We should have all the details on this and other 2019 Challengers when the car is officially revealed later this summer. Related Video: Featured Gallery 2019 Dodge Challenger SRT Hellcat Spy Shots View 11 Photos Image Credit: KGP Photography Spy Photos Dodge Coupe Performance dodge challenger srt hellcat