1970 Dodge Dart Swinger Hardtop 2-door on 2040-cars

Auto blog

Marchionne nixes talk of a reborn Dodge Viper

UPDATE: According to Automobile Magazine's Todd Lassa, FCA chief Sergio Marchionne shot down the idea of a reborn Viper, saying "it's not in the plan." Marchionne was referring to Fiat Chrysler's five-year plan, which we've been covering in bits and pieces as the news filters out. But it's not out of the realm of possibility, apparently, as Marchionne reportedly said he'd be happy to see the reptilian supercar back in production. And it's not all bad news, anyway. A reborn Alfa Romeo 8C will get a carbon-fiber chassis holding a mid-mounted twin-turbo V6. With more than 700 horsepower, including an electrically-driven front axle, the car should hit 62 mph in fewer than 3 seconds. Also, three versions of a Maserati Alfieri will be produced, including a convertible. An electrified all-wheel-drive powertrain is planned. So, performance is coming from FCA, it just may not be from Dodge. View 36 Photos First came the mourning for the Dodge Viper, which ended production last year. Then came the Viper's continued sales run as a "Zombie Car;" we just wrote about how the Viper has racked up 11 sales so far this year, two of them in April. Now Car and Driver reports that the two-seater snake will return shorty for its second encore after being discontinued in 2009. The mag isn't equivocal about it, either, writing, "trust us: A new Viper is happening." It won't, however, be the same Viper that brought ten-cylinder brass knuckles to shake down other coupes for their wallets and jewelry. CD says we should expect the same front-mid-engine layout and rear-wheel drive tucked into a new spaceframe. That engine will lose two cylinders, with Chrysler's next-gen, aluminum-block V8 Hemi slotting into the engine bay. The previous Viper's V10 had grown to 8.4 liters and 640 horsepower by the time it drove into the sunset. CD guesses the coming Viper will start with a naturally-aspirated version of the Hemi V8 working up around 550 horsepower. Healthy doses of aluminum and carbon fiber would restrain the car's weight, on top of the weight loss from swapping an iron V10 for an aluminum V8. SRT could tart up the horsepower with a few performance trims, before a supercharged V8 with 700-plus horsepower arrives at some point after launch. The mag also suspects the initial offering will be a convertible, the hardtop appearing "a few years after launch," which could coincide with the more powerful engine. A row-your-own shifter will sit between the seats.

Chop the top of your new Dodge Viper for $35,000

We have good news, and we have bad news. First, the good: It's now possible to get a brand-new Dodge Viper roadster, which is nice, considering we're in the dead of summer and many of us like wind-in-the-hair motoring. Now, the bad: This is not a factory option from the automaker, instead coming courtesy of an aftermarket company called Prefix Performance, and that means it's going to cost you some serious coin.
Called Medusa, this drop-top Viper was created without the knowledge or consent of Dodge, but that's probably fine because Prefix works with the automaker already for the final preparation of the American supercar, including paint. According to the company, the current, fifth-gen Viper was built with a convertible version in mind, so no chassis strengthening is required. From the looks of the somewhat grainy photos available, the conversion appears of very high quality.
Want one? Well, that means you're going to need to procure a Viper - Prefix has 10 units ready for transformation as it stands - and that's going to cost at the very least $102,485. Then, you'll need to write a check for an additional $35,000 for Prefix to surgically remove the car's roof. Thing is, for that kind of cash, a prospective owner could buy, among other very nice options, a Viper hardtop and a loaded Miata, or a Corvette Stingray convertible and several pockets full of change. Or, perhaps a new Viper hardtop and a used, first-gen Viper convertible?

Dodge engineers trying to shoehorn Pentastar into Dart?

The fact that the Dart's launch has been a pretty dismal affair isn't what we'd call secret. Judging by its mounting inventories and poor critical reception, Dodge's successor to its unloved Caliber has struggled since it hit the market. And while both of those are difficult problems to address, at least their cause is well known - the powertrain.
Even Fiat-Chrysler CEO Sergio Marchionne has acknowledged that the powertrain options in the Dart are substandard, admitting at January's Detroit Auto Show that the powertrains are "less than ideal." Leading with the 1.4-liter turbocharged four-cylinder found in the Fiat 500 Abarth left a bad taste in the mouths of consumers thanks to the laggy engine and dead throttle response (to say nothing of the manual and dual-clutch gearboxes that needed more refinement). The addition of the 184-horsepower 2.4-liter Tigershark in the Dart GT has helped matters some, but apparently Auburn Hills doesn't think it's quite enough.
If rumors are to be believed - get that salt ready - a possible solution may be in the works. A report from Allpar is claiming that Dodge is considering fitting a Pentastar V6 into the Dart's engine bay. As the Mopar-obsessed website points out, the critically acclaimed Pentastar is available in three different sizes - 3.0 liters, 3.2 liters and the original 3.6 liters. We don't get the 3.0 here in the US, but the 3.2 can be found in the new Jeep Cherokee and the 3.6 has been seemingly fitted to every model Chrysler can shoehorn it into.