2018 Dodge Charger Police on 2040-cars

Auto blog

We're pretty sure the Challenger SRT Demon won't have 1,121 horsepower, but what if?

Dodge's slow rollout of the upcoming Demon continues, and with it comes endless speculation about what it all means. Every video, every image, and every press release contains some clue that points towards the Demon's final specs. We don't think any of it is random or arbitrary. This week cryptic image, a small plate with a name and two numbers, shows us a little more than last week's license plate. Unfortunately, Dodge will neither confirm or deny anything, meaning we have no way of knowing which rabbit hole to go down. Don't expect to see official horsepower, a quarter-mile time, or an MSRP until the New York Auto Show. The plate is attached to the crate of goodies that comes along with every Dodge Demon. This particular one is labeled with three things: Tom Coddington, serial number 0757, and VIN 001121. The name is simple enough. According to Hot Rod, Coddington was one of the original Ramchargers, a group of engineers in the early 1960s that helped Dodge get involved in drag racing. He was a fuel system specialist, motor consultant, and a rotating garage manager. All of that could be clues. While a name is easy enough to Google, the two numbers can't be broken down so easily. The crazier theory is that the car makes 1,121 horsepower and will do the quarter-mile in 7.57 seconds. Frankly, those numbers are about as likely as the Demon actually being powered by a Rolls-Royce turbofan engine from a Boeing 757 or packing a carburetor with 1,121 CFM. The Demon is going to be street legal, and the costs associated with making a 1,121-hp car meet emissions standards alone are assuredly astronomical. As our friends from Road & Track pointed out, the more likely theory is that 757 is actually the horsepower rating. This seems totally plausible, but it means we still don't know what 1,121 means. Surely it's not a drag strip time, as the standard Hellcat will do 1/4 mile in 11.2 seconds. Like before, if you have any ideas, post them in the comments. Until April, we'll keep trying to solve Dodge's demonic puzzle. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. News Source: Road & Track, Hot RodImage Credit: FCA New York Auto Show Dodge Coupe Performance dodge demon dodge hellcat

Towing with the 2016 Ram lineup [w/video]

I do not tow things. Ever. Yet I recently found myself at the Fiat Chrysler Automobiles proving grounds in Chelsea, MI, where I'd be testing the hauling capabilities of Ram's current product range. This experience was not only a perfect education for a towing novice like me, but allowed me to tow far more weight than I'd ever consider hauling the real world, and all within the safe confines of the Chelsea Proving Grounds. There was an extremely diverse array of vehicles at my disposal, including Ram's gasoline- and diesel-powered offerings with trucks ranging from the 1500 on up through the 5500 Chassis Cab, as well ProMaster vans. Beyond that, FCA brought out a number of vintage Dodge pickups for me to play with, while also working with Case IH to provide a track-loader I could test. I put together a range of videos covering everything from the classics to the production trucks to the construction equipment. And despite some technical difficulties – you'll notice a distinct lack of in-car videos, with blame going to a corrupted micro SD card – I've assembled ten videos that give an up-close look at Ram's offerings. 2015 Ram ProMaster City Let's start small. The ProMaster City only has a towing capacity of 2,000 pounds. That's a reasonably impressive figure for a van that uses the same powertrain as a Chrysler 200. The 2.4-liter four-cylinder and nine-speed automatic weren't really bothered with the extra weight added by the trailer. Even when accelerating at freeway speeds, the ProMaster City didn't feel out of breath or hampered by its load. That said, the rear of the van was unloaded, which probably wouldn't be the case for most consumers. It's unclear how the City would feel if its driver were taking advantage of the max payload (1,883 pounds) and towing. 2015 Ram ProMaster 1500 To be polite, the Ram ProMaster is a difficult vehicle to like. Its awkward seating position is bus-like and lacks the visibility enjoyed by the Ford Transit or the utter driving comfort of the Mercedes-Benz Sprinter. Its 3.0-liter, four-cylinder turbodiesel engine, meanwhile, is something of an anomaly. While it's potent for a four-cylinder diesel, producing 295 pound-feet of torque and 174 horsepower, those numbers don't feel all that impressive when loaded down. The model I tested was barely using half of its 5,100-pound maximum towing weight and was loaded down with just 500 of its 3,620-pound payload. Yet it lacked the pluckiness of the smaller City.

Dodge revives Challenger T/A and Charger Daytona trims for 2017

Dodge is reviving the Challenger's T/A trim and the Charger's Daytona line for 2017. Introduced on iconic Woodward Avenue just days before the annual Woodward Dream Cruise kicks off, the new variants promise more performance hardware and sportier aesthetics. We'll start with the two-door. The Challenger T/A, available with either the R/T trim's 5.7-liter V8 or the fire-breathing 6.4-liter Hemi V8, is inspired by the Challenger T/As of old. That means a less restrictive, 2.75-inch active exhaust system and a conical Mopar air filter. But there's no clear bump in output – Dodge still lists the base 5.7-liter at 375 horsepower and the 6.4-liter model at 485 hp. But hey, they're going to look cooler. Unlike the Challenger Hellcat, which should have it as standard, Dodge is including a Satin Black hood on every Challenger T/A. In fact, Satin Black is a recurring theme on this Challenger's front fascia, roof, rear decklid, and T/A bodyside stripes. And yes, the 20-inch Mopar wheels are black, too – they're also an inch wider than normal. Dodge is offering the T/A in three different trims. The base T/A has everything we described above, while the T/A Plus adds some comfort features like heated and vented Nappa leather seats, an 8.4-inch UConnect system with Apple CarPlay/Android Auto, a six-speaker stereo, and a shortcut button for the Dodge Performance Pages. The T/A 392, meanwhile, adds the 6.4-liter V8, even wider wheels, and Brembo six-pot calipers. If you prefer smoking tires with four doors, there's the new Charger Daytona. No, there's not an enormous wing on the back. But Dodge added the same kind of engine/exhaust upgrades found on the T/A while upping the top speed from 135 to 150 miles per hour. Satin Black features prominently again, with hood and rear fender graphics. The roof is also black. Unlike the Challenger, Dodge is only offering two different versions of the Daytona – the 5.7-liter base model and the 6.4-liter version, called the Daytona 392. Prices for the Challenger T/A start at $38,485, including a $1,095-destination charge, while the T/A Plus adds $2,750. Adding the 392 means shelling out $45,090. For the Daytona, you'll need a check for $40,985 for the 5.7-liter or $46,090 for the 6.4-liter. Orders for the Charger Daytona open in September, while the T/A is a month later. Related Video: