1970 Dodge Challenger Roller on 2040-cars

Auto blog

The Dodge Demon's massive hood scoop sucks air like a jet intake

You know what they say about cars with big hood scoops? They usually hide big blowers. At least that's the case with the Dodge Demon and its 45-inch wide hood scoop, the largest ever fitted to a factory production car. The fifth Demon teaser, "Forced Induction," shows off the increased capacity of the car's air intake and the resurrection of the Air Grabber hood scoop on Dodge's upcoming quarter-mile killer. View 4 Photos As with previous teasers, few details have been given outside of the Subaru-trouncing scoop's dimensions. Dodge says the scoop drops air inlet temperatures by more than 30 degrees. Where the more pedestrian Hellcat only has one air catcher headlight, both inner lights on the Demon are used to feed in air. The hood itself appears to channel air in and to the right into a new airbox that appears to be fitted with a K&N-style filter. Dodge seems intent on preventing any asthma issues with the new car. Standing in front of the car might literally take your breath away. Outside of that, the images don't show any new cryptic messages like previous teasers, or at least none that we can spot. One thing we did notice was that the engine block appears to be painted red, not orange like on the Hellcat. Doing some back and forth comparison also shows that the supercharger appears to be the same size as the current one. Of course, this is all speculative, so if you spot anything, drop a note in the comments. Related Video:

EV cost burden pushing automakers to their limits, says Stellantis' CEO Tavares

DETROIT — Stellantis CEO Carlos Tavares said external pressure on automakers to quickly shift to electric vehicles potentially threatens jobs and vehicle quality as producers struggle with EVs' higher costs. Governments and investors want car manufacturers to speed up the transition to electric vehicles, but the costs are "beyond the limits" of what the auto industry can sustain, Tavares said in an interview at the Reuters Next conference released Wednesday. "What has been decided is to impose on the automotive industry electrification that brings 50% additional costs against a conventional vehicle," he said. "There is no way we can transfer 50% of additional costs to the final consumer because most parts of the middle class will not be able to pay." Automakers could charge higher prices and sell fewer cars, or accept lower profit margins, Tavares said. Those paths both lead to cutbacks. Union leaders in Europe and North America have warned tens of thousands of jobs could be lost. Automakers need time for testing and ensuring that new technology will work, Tavares said. Pushing to speed that process up "is just going to be counter productive. It will lead to quality problems. It will lead to all sorts of problems," he said. Tavares said Stellantis is aiming to avoid cuts by boosting productivity at a pace far faster than industry norm. "Over the next five years we have to digest 10% productivity a year ... in an industry which is used to delivering 2 to 3% productivity" improvement, he said. "The future will tell us who is going to be able to digest this, and who will fail," Tavares said. "We are putting the industry on the limits." Electric vehicle costs are expected to fall, and analysts project that battery electric vehicles and combustion vehicles could reach cost parity during the second half of this decade. Like other automakers that earn profits from combustion vehicles, Stellantis is under pressure from both establishment automakers such as GM, Ford, VW and Hyundai, as well as start-ups such as Tesla and Rivian. The latter electric vehicle companies are far smaller in terms of vehicle sales and employment. But investors have given Tesla and Rivian higher market valuations than the owner of the highly profitable Jeep and Ram brands. That investor pressure is compounded by government policies aimed at cutting greenhouse gas emissions. The European Union, California and other jurisdictions have set goals to end sales of combustion vehicles by 2035.

The Dodge Neon is coming back... to Mexico

It's been a long time since we've seen a new Dodge Neon putt-putting around. But soon it will be back, and in North America, too, if you want to get technical about it. But this time, the Neon will be limited exclusively to Mexico. According to Ward's Auto, FCA is planning to import the Fiat Tipo to Mexico, but rebadged under the Dodge brand and with the Neon nameplate on the trunk... even if it doesn't have those signature round headlights, or a three-speed automatic transmission. Never heard of the Fiat Tipo? It debuted almost a year ago as the Aegea Project, and went into production shortly thereafter – similarly called the Egea in Turkey where it's made, but the Tipo in other European markets. It's a budget-oriented, C-segment compact with a range of four-cylinder engines, and though designed from the get-go as a four-door sedan, it rolled into Geneva last month in hatchback and wagon forms as well. The Tipo is built at the Tofas plant in Bursa, Turkey, alongside the Fiat Doblo – which is also shipped over to North America, rebadged as the Ram ProMaster City. In the Mexican market, FCA also sells the Fiat Siena sedan as the Dodge Vision, the Mitsubishi Mirage rebadged as the Dodge Attitude, and the Fiat Strada as the Ram 700 – all nameplates exclusive to our neighbors to the south. Whatever its origin, it'll be interesting to see a Neon again the next time we venture South of the Border – particularly considering that the Neon was arguably the last time that Chrysler had a competitive compact on its hands. The Caliber that followed never gained the same kind of traction, so to speak, and FCA recently ceased production (for the time being at least) of the Dodge Dart and Chrysler 200 to focus on larger trucks crossovers – the likes of which the Caliber tried to emulate (in style, if not in substance).