Chrysler Pacifica, page #4

Chrysler Pacifica Price Analytics

About Chrysler Pacifica

Auto blog

Junkyard Gem: 1964 Plymouth Valiant V-200 Wagon

When Chrysler introduced the Valiant for the 1960 model year, the automotive world had no idea that this new compact would become one of the most successful products in the company's history. Valiants and its A-Body siblings were built and sold by the millions around the world, with production continuing into the early 1980s (in Australia and South America). The sales pinnacle for the Valiant in the U.S. was 1964, and today's Junkyard Gem is one of those cars: an upscale V-200 station wagon, found in a Denver-area wrecking yard a few weeks back. The Valiant began life as its own marque, became a Plymouth for 1961, left Plymouth for 1962, then returned as a Plymouth model until American Valiant production ceased in 1976, and the Volare took its place. You'll barely see any mention of the Plymouth brand in the 1964 Valiant brochure, and Plymouth badging on the '64s was minimal. You could get the 1964 Valiant wagon as the base V-100, starting at $2,273, or as the nicer V-200 with its $2,388 price tag (that's about $21,150 and $22,220 in 2022 dollars). Valiant coupes and convertibles could be had with the even swankier (by cheap small-car standards) Signet trim level. As Ford showed us in the middle 2000s, numbers are just classier if you spell them out on emblems. In the middle 1960s, substituting an automatic for the base three-on-the-tree column-shift manual transmission jacked up the price of an affordable car by an eye-watering amount. The Torqueflite three-speed automatic and its slick-looking push-button shifter cost 172 bucks extra (around $1,600 today), which made the car more than 7% costlier. A four-on-the-floor manual was available for the first time in a new Valiant that year, but it cost $180. Also new for the 1964 Valiant was a V8 option (a 273-cubic-incher rated at 180 horsepower), but this car has the good old Slant-6. If it's the engine that came with the car when it rolled off the assembly line, it's a 101-horse example with 170 cubic inches… but these cars are notorious for getting engine swaps early and often and I didn't check the block casting numbers. The cassette deck tells us that it was being driven as recently as the late 1980s through middle 1990s. There's some rust in the usual spots, about what this car would have acquired by 1967 if it had stayed in Michigan. This car could have been restored, though the expense for rust repair and interior refurbishment wouldn't have been a good investment from a financial standpoint.

Macron and Le Pen decry 'shocking' Stellantis CEO pay

PARIS — French President Emmanuel Macron and his far-right challenger in the French presidential vote, Marine Le Pen, on Friday both decried as “shocking” the multimillion euro payout to the CEO of carmaker Stellantis. Stellantis CEO Carlos TavaresÂ’ remuneration package of 19.15 million euros just a year after the company was formed became an issue as Macron and Le Pen campaigned ahead of the April 24 runoff vote. Polls show purchasing power and inflation are a top voter concern. Stellantis was formed last year through the merger of PSA Peugeot and Fiat Chrysler Automobiles. Centrist President Emmanuel Macron, perceived by many voters as being too pro-business, called the pay package “astronomical” and pushed for a Europe-wide effort to set ceilings on “abusive” executive pay. “ItÂ’s shocking, itÂ’s excessive,” he said Friday on broadcaster France-Info. “People canÂ’t have problems with purchasing power, difficulties, the anguish theyÂ’re living with, and see these sums. Otherwise, society will explode.” Far-right leader Marine Le Pen, who enjoys support from many working-class voters, called for bringing in more workers as shareholders. “Of course itÂ’s shocking, and itÂ’s even more shocking when it is the CEOs who have pushed their society into difficulty,” she said Friday on BFM television. “One of the ways to diminish this pay, which is often out of proportion with economic life, is perhaps to allow workers in as shareholders.” Stellantis continued to back the package despite a 52.1% to 47.9% vote rejecting it at an annual shareholders' meeting chaired from the Netherlands, where the company is legally based, on Wednesday. The company, citing Dutch civil code, noted that the vote is advisory and not binding. The company later said in a statement that it took note of the vote, and will explain in an upcoming 2022 remuneration report “how this vote has been taken into account.” In the 2021 report, the company identified peer group companies that it used as a salary benchmark, including U.S. companies like Boeing, Exxon Mobile, General Electric as well as carmakers Ford and General Motors. Stellantis, whose brands include Peugeot, Fiat, Jeep, Opel and Maserati, reported net profits last year had tripled to 13.4 billion euros ($15.2 billion). The French government is the third-largest shareholder in Stellantis, with a 6.15% stake through the Bpifrance Participations S.A. French public investment bank.

2022 New York Auto Show Roundup | All the reveals, reviews, pictures

NEW YORK — In case you missed it, the New York Auto Show took place this year after being canceled in both 2020 and 2021 due to Covid. A lot of manufacturers showed up in force, but not everybody did. No matter, we were there, and we brought you news, photos and scoops from the floor throughout the show. All of our New York-related stories can be found at our central hub here, but if youÂ’d rather just get a small taste of everything in a quick and digestible format, keep scrolling. 2023 Kia Telluride and its new X-Pro trim Kia revealed the TellurideÂ’s first major refresh at New York, and it makes the three-row crossover a little bit more desirable without screwing up what we liked about it before. ThereÂ’s a new X-Line and X-Pro trim for someone who might want a little more off-road capability, and a number of tech improvements. Most notably, a newly-designed dash features new and bigger screens. 2023 Hyundai Palisade The TellurideÂ’s sister car from Hyundai was treated to a similar refresh. Like the Telluride, Hyundai gave the Palisade a slightly revised look, a new off-road trim (called XRT in the PalisadeÂ’s case), more tech inside and a new dash design with full-width air vents. If we had to choose, weÂ’re a little more impressed with the TellurideÂ’s refresh, as a number of us on staff actually prefer the pre-refresh Palisade styling over the new one. 2023 Jeep Wagoneer L and Grand Wagoneer L This one was inevitable. Jeep revealed the longer, roomier versions of its Wagoneer and Grand Wagoneer in New York, and theyÂ’re designated with an “L” at the end of their names. Total length grows by a foot, and the wheelbase goes up by 7 inches versus the standard Wagoneer models. Jeep has essentially allocated all this extra room to the cargo area, as it now offers a staggering 44.2 cubic-feet of space behind the third row. Besides the L, Jeep announced that its new Hurricane inline-six engine would find its first home in the Wagoneer. Efficiency gets a small boost, and power is more than sufficient at either 420 horsepower (standard output) or 510 horsepower (high-output version) from the twin-turbo I-6. Chrysler Airflow Graphite Concept The Stellantis party continues with Chrysler and its slightly revised Airflow. Re-styled for the New York market after initially debuting at CES in Las Vegas, the Airflow Concept gets new paint, changed accent colors, a slightly changed interior design and a new interpretation of the Chrysler logo.

The Hemi deserves to die | Opinion

Hi. I'm Byron and I love V8s. I want them to stick around for a long, long time. But not all V8s are created equal, and I will not mourn the passing of the modern Hemi. You shouldn't either. While we may agree that its death is untimely, if you ask me, that's only because it came far too late.  Stellantis’ announcement of its new, turbocharged inline-six that is all but guaranteed to kill off the Hemi V8 has led to quite a few half-baked internet takes. The notion being suggested by some, that automotive media were brainwashed into believing the Hemi was in need of replacement, is so far divorced from reality that I openly guffawed at the notion. Journalists have been challenging Chrysler, FCA and now Stellantis for years to deliver better high-performance engines. The response has always been the same: “Why?” Why replace a heavy V8 with a lighter, all-aluminum one? Why repackage powertrains for smaller footprints and better handling vehicles? Why be better when “good enough” sells really, really well? I too mourn the departure of good gasoline-burning engines, but since when was the Hemi one? HereÂ’s a quiz: Name every SRT model with an all-aluminum engine. TimeÂ’s up. If you named any, you failed. They donÂ’t exist. This isnÂ’t GMÂ’s compact, lightweight small-block, nor is it a DOHC Ford Coyote that at least revs high enough to justify its larger footprint. The Hemi is an overweight marketing exercise that happened to be in the right place at the right time. That time was 2003, when Chrysler was still Chrysler — except it was Daimler-Chrysler and the "merger of equals" was doing a bang-up job of bleeding the company's cash reserves dry while doing virtually nothing to address its mounting legacy costs. "That thang got a Hemi?" was emblematic of the whimsical, nostalgia-driven marketing of the colonial half of the "marriage made in heaven." That was 20 years ago. 20 years prior to that, emissions-choked American V8s were circling the drain faster than a soapy five-carat engagement ring in a truck stop sink.

Chrysler Airflow EV concept gets new duds for New York

Chrysler's Airflow electric crossover returned to the stage in New York Wednesday in a new exterior finish as Chrysler's development engineers creep closer and closer to their goal of taking the brand all-electric by 2028. The brand's first electric vehicle is due by 2025, and some variant of this definitely-not-a-revived-Celine-Dion-era-Pacifica-crossover thing is likely to be it.  This version of the Airflow is dubbed "Graphite" and is the iteration Chrysler teased ahead of the show, but as we expected, not much of substance has really changed. Perhaps that's because this concept isn't yet particularly substantial. That's the beauty of an EV; once you have the basic design nailed down, the rest is really just an elaborate Lego project. Chrysler's builders are evidently still hard at work putting together a final product that lives up to the initial hype and range target of 400 miles on a charge.  In the meantime, the design team has been tweaking the looks. As we saw in the teaser, the updated Airflow gets a new grille design with a thin light bar at the Airflow's nose and acute beneath flanking the headlights forming a symmetrical pair of lightning bolts (gee, d'ya suppose it's electric?) aimed at the car's nose. The lower fascia appears a bit more sharply defined too, but it could just be the lighting.  The updates to the exterior are repeated inside on the wheel and dash, which have also had their colors inverted from the concept we saw at CES. Some of the interior details have also been tightened up from what we can see here. The selector dial on the center console appears to be more compact, as does the primary infotainment screen (though again, that could be a trick of the "photography"). The secondary display beneath the main infotainment screen has also been eliminated. We're guessing those controls have either been integrated into the main screen or as touch-sensitive elements hidden in the glossy plastic where the screen once was. The same was done to the steering wheel controls, it seems.

Chrysler Airflow EV concept teased with new nose ahead of NY Auto Show

Chrysler is once again teasing its battery-electric Airflow concept. The company has issued a new image ahead of its official debut at the New York Auto Show later this week. The rendering, as well as language in the accompanying release, indicates that Chrysler may have redesigned the concept before a production version even hits the market. The latest image shows a long, thin light bar at the Airflow's nose, with acute angles just before the headlight to create a bit of a "lightning bolt" zig-zag. There's also a wide, U-shaped graphic below the bar, and a "grille" featuring a pattern of slits that surrounds the bar. Previous Airflow images from Chrysler — released as recently as January at CES — have shown a very different front end. There, a differently shaped bar was broken up by a stylized Chrysler logo, done up in an outline of the traditional wings. The ends of the bar extended to the edges of the headlights without any sharp angles. It also appeared to have a different grille texture above and below the bar. "Chrysler will unveil a new look for the brandÂ’s all-electric Chrysler Airflow Concept at the 2022 New York International Auto Show," the press release states. The same statement also refers to "a potential design path on the brandÂ’s journey to an all-electric future." The Airflow is the latest in a slew of luxury models promised by automakers trying to re-invent their brands by going electric. It is named after the revolutionary 1934 Airflow, the first automobile to employ aerodynamics in its design. Though not a commercial success, it is credited with forever changing automotive styling principles. Although EVs are no longer avant-garde, Chrysler seems to hope that the new Airflow will make as dramatic a change in the industry, or at least revive the brand.

500+ hp Stellantis 'Hurricane' I6 previews a world without Hemis

After years of rumored development, Stellantis has revealed its new six-cylinder engine family. The 3.0-liter, twin-turbocharged "Hurricane" I6 will offer V8 power, forced induction torque and six-cylinder efficiency in a package designed to fit into any of the company's North American rear-wheel-drive platforms.  What is "V8 power," exactly? Well, in standard output guise, the new I6 cranks out more than 400 horsepower (the specific figure will vary by application) and 450 pound-feet of torque, while the high-output variant is good for more than 500 horses and 475 lb-ft. The final figures will be dependent on the application. We'll save you a little legwork: In current Ram, Jeep and Dodge products, the 5.7-liter Hemi tops out at about 395 hp and 410 lb-ft, give or take, and the 6.4-liter around 485 hp and 475 lb-ft.    This is a clean-sheet design that is only related to the company's turbocharged four-cylinder by some common measurements. The I6 is exclusively direct-injection (no hybrid/port-injection here) and the two I6 variants share 96 common parts, including the block and oil pan design. The differences are found in their internals, intake plumbing, valvetrain components and the turbochargers themselves. Stellantis is not yet ready to share specs or supplier info for the turbos but says announcements will come from its partners soon.  The standard-output I6 has a compression ratio of 10.4:1 and revs to 5,800 rpm. It will run on regular fuel, albeit with reduced performance; 91 octane is recommended for maximum output. The high-output variant has a compression ratio of 9.4:1 and will rev to 6,100 rpm. That one will require premium. The new I6's advantages go beyond basic power output. Every Hemi family engine currently in production is based on an iron block design, so they're heavy. The aluminum-block I6 shaves weight off the total engine package, even if some of that gets added back thanks to the turbos and their associated plumbing. The standard-output I6 weighs 430 pounds, Stellantis engineers told us; the high-output adds just another 11. Fully dressed 5.7-liter V8s are in the 550-560-pound ballpark, and 6.4-liters close in on 600 pounds.  You may be wondering, "Why a clean-sheet gasoline engine now, when the industry is moving toward battery-electrics?" A valid inquiry, and one Stellantis was prepared to address. While the company will be pivoting to electrification over the next decade, it won't be instantaneous.

Stellantis and LG announce Canadian EV battery joint venture

SEOUL — South Korean battery giant LG Energy Solution (LGES) said on Wednesday it plans to invest $1.5 billion to set up a joint venture with Stellantis in Canada. LGES owns 51% of the joint venture, tentatively named "LGES-STLA JV" and Stellantis owns 49%, LGES said in a regulatory filing. In October, LGES and Stellantis NV struck an electric vehicle (EV) battery production joint venture, targeting to start production by the first quarter of 2024 and aiming to have an annual production capacity of 40 gigawatt hours of batteries. In a separate regulatory filing, LGES said it plans to acquire a stake worth $542 million in ES America to respond to demand from EV startups in the United States. LGES is considering building a factory in Arizona to meet demand in the United States, two people familiar with the matter told Reuters, adding that the plant is expected to primarily produce cylindrical battery cells. LGES has its own factory in Michigan and two battery joint ventures with General Motors in Ohio and Tennessee. "We are considering a new production site, but nothing has been decided yet," said a spokesperson at LGES. LGES, which counts Tesla, GM and Volkswagen among its customers, currently has battery production sites in the United States, China, Poland, Indonesia and South Korea. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Green Plants/Manufacturing Chrysler Dodge Fiat Jeep RAM Electric

Junkyard Gem: 2002 Chrysler PT Cruiser Convertible Conversion

Chrysler started selling PT Cruisers for the 2001 model year, and these "trucks" (yes, they were considered trucks for American regulatory purposes) proved quite popular for at least the first half of the 2000s. A factory-built version with a convertible top appeared for 2005 (and later "won" the Top Gear Worst Car of the Last 20 Years award), but what about the PT Cruiser shoppers who wanted a drop-top before then? It turns out the aftermarket had the solution: the Newport Convertible Engineering conversion, which took new PT Cruisers and added a fully functioning convertible top. According to a discussion on Allpar, 54 of these conversions were performed, and I found one of them in a Denver-area self-service yard last month. Newport Convertible Engineering is still around, though they're in Huntington Beach instead of Placentia these days. If you want a Tesla Model S or Range Rover convertible, they'll build it for you. The NCE conversion for the PT Cruiser cost $9,900 (about $15,715 in 2022 dollars) plus the $17,000 sticker price of a new PT Cruiser, and included the needed chassis-stiffening modifications and a shortened, hydraulically-actuated rear hatch. The materials used look pretty good, even after 20 years of abuse and neglect. This one had the convertible mechanism ziptied shut in many locations when I found it. Naturally, I cut all those zipties to see if the roof mechanism still worked. It was very, very stiff but proved semi-functional (the zipties appeared to be an attempt to keep a faulty latch mechanism from letting the roof pop open at speed). The roof assembly weighs a lot, though you could spend an extra $3,000 to get a power-actuation system from NCE. This cab must have been extremely noisy and buffety with the top down at speed, but so what? Convertibles are cool. Mechanically, it's an ordinary Touring Edition with a Neon's 2.4-liter four-cylinder making 150 horsepower. You could get a PT Cruiser with a five-speed manual transmission, and many did, but this one has the extra-cost automatic. Starting in the 2003 model year, a 215-horse turbocharged engine became available. Rare, but not valuable. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. This commercial is for the factory convertible, but you get the idea.

Ford stops JV work In Russia, Stellantis donates to Ukrainian refugees

Russia’s invasion of Ukraine is obviously killing civilians and destroying infrastructure throughout the country. ItÂ’s also affecting the auto industry there and across wider Europe, from the wiring harnesses we mentioned earlier today to new announcements from Ford and Stellantis. And thereÂ’s reason to think in bigger terms than todayÂ’s business deals, since there are massive lithium deposits in the ground in Ukraine. What this means for raw materials for future electric vehicles canÂ’t yet be determined, but itÂ’s worth thinking about as the world reacts to RussiaÂ’s actions. Following decisions by Apple and other major automakers to stop or otherwise curtail activities in Russia, Ford announced that it will suspend all of its joint venture operations in Russia, effective immediately, until further notice. “As part of the global community, Ford is deeply concerned about the invasion of Ukraine and the resultant threats to peace and stability,” the company said in a statement. “The situation has compelled us to reassess our operations in Russia. In recent years, Ford has significantly wound down its Russian operations, which now focus exclusively on commercial van manufacturing and Russian sales through a minority interest in the Sollers Ford joint venture.” Even though Stellantis only has 71 employees based in Ukraine, it announced today it will donate 1 million euros (around $1.1 million U.S.) to Ukrainian refugees and civilians. StellantisÂ’ head of operations in Ukraine will help the automaker work with local non-governmental organizations that are supporting Ukrainians to get the funds where they need to go. “Stellantis condemns violence and aggression and, in this time of unprecedented pain, our priority is the health and safety of our Ukrainian employees and families,” Stellantis CEO Carlos Tavares said in a statement. “An aggression that shook a world order, already unsettled by uncertainty, has been launched. The Stellantis community, made of 170 nationalities, looks with dismay as civilians flee the country. Even if the scale of casualties is not yet apparent, the human toll will be unbearable.” As of this morning, Stellantis said all of its 71 employees there were safe. This is not a normal line to read in automotive press releases, but this is not a normal time.