2004 Chrysler Pacifica Awd Touring Navigation Dvd Lqqk on 2040-cars

Auto blog

2019 Toyota Sienna AWD vs 2018 Chrysler Pacifica Hybrid | New meets old

The Toyota Sienna has always been an inconspicuous van. They're out there, there's a lot of them and they're huge, but they blend in with darn near everything. Perhaps Toyota noticed that a little while ago and slapped on the slightly garish grille/not a grille plastic thing in the front bumper, but it still doesn't really stand out. On the other hand, our long-term Chrysler Pacifica Hybrid, which is a great deal newer than the Sienna, has slick styling that gets noticed. Toyota hasn't properly redesigned the Sienna since the 2011 model year, and it shows on every front. Despite its many shortcomings, there are still some valid arguments for going with the dinosaur. Ride and handling Of all the reasons to choose a Sienna over the much newer competition, available all-wheel drive has to be the main one. My tester was so equipped, and I got a chance to test it out in both snow and ice. Obviously, the first thing I did in powder was see if the rear end would break loose. I can confirm that with traction control off, the Sienna will slide around a little bit. You won't be doing any sick drifts, but it's undoubtedly more fun than our Pacifica. The Chrysler is fitted with Nokian Hakkapelitta winter tires. As you might guess, this means that braking and grip around corners is better than the Sienna in snow. If the Sienna were to ditch its slippery all-seasons for a proper set of winters, it would be running circles around the Pacifica. Still, I drove our Pacifica through a lake effect blizzard in Buffalo and it never blinked from lack of traction with multiple inches of snow on the ground. Some folks are going to want the assurance of all-wheel drive, and the Sienna will offer it, but don't make it your only option. All-wheel drive might help you get going, but winter tires are there to save the day when sledding gets tough. What impressed most about the Sienna was its ride quality and composure. This van earned its road warrior status on my drive to the Chicago Auto Show from Detroit. The long highway trek was handled without issue by the big minivan chassis. Bumps and road imperfections were soaked up well. Noise wasn't much of an issue either, something minivans can struggle with given the massive amount of space in the cabin ripe for vibrations and rattles. However, an uncomfortable seat led to some soreness after over four hours in the saddle. No matter how I adjusted the lumbar, it didn't seem to take to my 5'10" slim frame.

Stellantis aims to eliminate separate inverter, charger to improve EV efficiency

Stellantis has announced that, in collaboration with French battery company Saft and French National Center for Scientific Research, has made significant progress in eliminating two major components of an electric vehicle powertrain: the on-board charger and the power inverter for the motor. The company claims that doing this will allow for better space use in vehicles, as well as improvements in efficiency, cost and reliability of components. As a quick primer, also explained in the below video, the on-board charger and power inverter are sort of translators to get the right current to different parts of the electric powertrain. The on-board charger takes AC power from the grid and converts it to DC to charge the batteries. Then when power goes from the batteries to the electric motor, the power inverter converts that DC power back to AC. These components aren't exactly small. Frequently you'll find them packaged somewhere under the hood. What Stellantis and its cohorts have developed, and have been using on a test vehicle since last summer, are small power inverter boards that can be mounted very closely to the battery packs. They can handle both conversion needs, for charging and discharging, instead of needing two separate devices. The most obvious perk to this is that you can do away with those traditional components and free up more space, either for making smaller vehicles without losing interior volume, or adding space to a vehicle that wouldn't have had it otherwise. There's the additional benefit of reduced weight, something that EVs struggle with. Stellantis also claims improvements in efficiency, reliability, and cost, however, it didn't go into detail as to how this setup would do that exactly. We'll try to get in touch with representatives from Stellantis in order to get more information. We're still a ways out from seeing this technology in production Stellantis vehicles. The company said it aims to apply it to vehicles by the end of the decade. Saft is also looking at using it on stationary battery systems as well. So maybe we'll see it on a 2029 Ram 1500 REV, but for now, we'll be living with traditional chargers and inverters. Related Video: Green Alfa Romeo Chrysler Dodge Fiat RAM Technology Electric

2021 Chrysler Pacifica refresh spotted with its new bits covered

The Chrysler Pacifica is the critical darling of the minivan segment, but FCA seems keen to make it even better with a 2021 refresh we're expecting to see later this year. From these photos, we can tell that FCA's beloved people hauler will get some front- and rear-end updates. The spy who captured these photos also passed along the fact that the engineers inside moved quickly to cover up its interior, hinting that there will be news on that front as well. There might be more to this that we can't see from the outside. Rumors have been swirling for the better part of a year that Chrysler has plans to add all-wheel drive to the Pacifica's option sheet.  FCA has remained mum about this potential development, but it would be a logical step to keep the minivan relevant as the industry continues to feel the effects of crossover creep.  If it does come to fruition, this wouldn't be the first time FCA has offered all-wheel drive on a minivan, but historically the feature has come at the expense of another wildly popular option: the company's Stow 'n Go seating system, as the cubbies have always occupied the same space that would be needed to install a prop shaft to carry power to the rear axle. Maybe FCA's engineers have figured out how to combine the two, or will simply offer both as options that can't be combined as they have in the past. Given what appears to be the production-ready state of this particular test car, we may not have to wait long to find out.