Chrysler MODEL 62, page #3

Auto blog

Junkyard Gem: 2001 Plymouth Neon

Chrysler's Plymouth brand was created in 1928 (and named after a brand of twine favored by farmers), in order to compete against Ford and Chevrolet for entry-level car shoppers. Plymouth stayed in third place in the US-market new-car sales hit parade for most of the years through the early 1950s and remained a strong (if gradually shrinking) player for decades after that. By the 1990s, though, it was tough to distinguish Plymouths from Dodges and DaimlerChrysler announced in late 1999 that the Plymouth Division would be getting the axe. 2001 was the last model year for Plymouth, with just one kind of vehicle sold for that year: the Neon. Today's Junkyard Gem is one of those final Plymouths, found in a Denver self-service yard recently. In the years just before the DaimlerChrysler "merger of equals," Chrysler had attempted to make the Plymouth brand more interesting. An updated version of the old Plymouth ship emblem was created, a Plymouth-badged car on the Chrysler LH platform was planned, the PT Cruiser was going to be a Plymouth, and then there was the Prowler crypto-hot-rod. Those dreams of a revived Plymouth bit the dust once Herr Schrempp took over. The Prowler and Voyager became Chryslers, while the PT Cruiser never had even a single year of Plymouth badging. The only 2001 car sold as a Plymouth was the humble Neon. Since the very beginning of Neon production as a 1995 model, there never had been much difference between the Neons with Dodge badges and the ones with Plymouth badges, continuing the tradition of the Dodge/Plymouth Colt and Dodge Omni/Plymouth Horizon. Earlier generations of Plymouths (e.g., the Valiant) had been mechanically identical to their Dodge-badged siblings, but at least they looked different and had smaller price tags. In 2001, the MSRP of a base Dodge Neon was $12,715, or about $22,156 in 2023 dollars. The price of the base 2001 Plymouth Neon? $12,715. At least the Plymouth Division got two model years in which to sell the second-generation version of the Neon. The engine is the SOHC version of Chrysler's 2.0-liter straight-four, rated at 132 horsepower and 130 pound-feet. Sorry, 2001 Plymouth shoppers, your Neons didn't get the 150-horse version that Dodge Neon R/T and ACR models received that year. This car has some extra-cost goodies. There's this three-speed automatic transmission, which had a $600 cost ($1,036 in today's money). It has the $1,000 air conditioning option as well ($1,742 now).

2024 Chrysler Pacifica Review: Plug-In Hybrid is still the one to get

Pros: Unique plug-in hybrid; versatile Stow ‘n Go seats; great entertainment features; good looks Cons: No cheaper base trim; top trims and Hybrid are really expensive; less-comfy second-row Stow ‘n Go seats Wow, does time fly by. The 2024 Chrysler Pacifica represents the eighth(!) model year since ChryslerÂ’s iconic minivan lineup was reborn under a single newish name with handsome styling, state-of-the-art features and a plug-in hybrid powertrain that provided unrivaled fuel economy for a three-row family vehicle. Turns out Chrysler did a pretty bang-up job all those years ago, because for 2024, the Pacifica remains a fully competitive and appealing minivan that doesnÂ’t seem long in the tooth. True, the revolutionary Pacifica Plug-In Hybrid makes a more compelling case for itself since no competitor matches it. Even the excellent, hybrid-only Toyota Sienna doesnÂ’t offer the all-electric range of the Plug-In Pacifica. The superior fuel economy offered by both, however, is the key reason why they are our top minivan choices. We ultimately give the nod to the Toyota due to interior versatility and the Plug-InÂ’s hefty price increase last year (2024 pricing was not available at the time of this writing, but since when do cars get less expensive year to year?). As for the standard, V6-only Pacifica, it still stands out from the pack with its user-friendly technology (for those up front and in back), attractive interior style, well-mannered driving dynamics, and unique Stow ‘n Go second-row seats you canÂ’t get in the hybrid. ThereÂ’s a lot to like, but then the same can be said of the Sienna, Kia Carnival and Honda Odyssey. The Pacifica may not be long in the tooth, but its competition has caught up or surpassed it in some respects, so cross-shopping is a must. Interior & Technology   |   Passenger & Cargo Space   |   Performance & Fuel Economy What it's like to drive   |   Pricing & Trim Levels   |   Crash Ratings & Safety Features What's new for 2024? The Pacifica Hybrid has been officially renamed the Pacifica Plug-In Hybrid, but itÂ’s always been a plug-in hybrid, so thereÂ’s nothing functionally new about it. Its trim levels do get reduced by one, with a new Select trim level joining the carry-over Pinnacle. Speaking of that trim level, it gets a new exclusive “Sepia” interior color, with quilted leather seats accented with “Light Diesel stitching and Sydney Gray piping.” Fancy.

Gas-electric hybrid vehicles are getting a boost from Ford, others

DETROIT — Hybrid gasoline-electric vehicles may not be dying as fast as some predicted in the auto sectorÂ’s rush to develop all-electric models. Ford Motor is the latest of several top automakers, including Toyota and Stellantis, planning to build and sell hundreds of thousands of hybrid vehicles in the U.S. over the next five years, industry forecasters told Reuters. The companies are pitching hybrids as an alternative for retail and commercial customers who are seeking more sustainable transportation, but may not be ready to make the leap to a full electric vehicle. "Hybrids really serve a lot of America," said Tim Ghriskey, senior portfolio strategist at New York-based investment manager Ingalls & Snyder. "Hybrid is a great alternative to a pure electric vehicle; it's an easier sell to a lot of customers." Interest in hybrids is rebounding as consumer demand for pure electrics has not accelerated as quickly as expected. Surveys cite a variety of reasons for tepid EV demand, from high initial cost and concerns about range to lengthy charging times and a shortage of public charging stations. “With the tightening of emissions requirements, hybrids provide a cleaner fleet without requiring buyers to take the leap into pure electrics,” said Sam Fiorani, vice president at AutoForecast Solutions. S&P Global Mobility estimates hybrids will more than triple over the next five years, accounting for 24% of U.S. new vehicle sales in 2028. Sales of pure electrics will claim about 37%, leaving combustion vehicles — including so-called “mild” hybrids — with a nearly 40% share. S&P estimates hybrids will account for just 7% of U.S. sales this year, and pure electrics 9%, with internal combustion engine (ICE) vehicles taking more than 80%. Historically, hybrids have accounted for less than 10% of total U.S. sales, with ToyotaÂ’s long-running Prius among the most popular models. The Japanese automaker has consistently said hybrids will play a key role in the company's long-range electrification plans as it slowly ramps up investment in pure EVs. Ford is the latest to roll out more aggressive hybrid plans. On its second-quarter earnings call in late July, Chief Executive Jim Farley surprised analysts, saying Ford expects to quadruple its hybrid sales over the next five years after earlier promising an aggressive push into all-electric vehicles. “This transition to EVs will be dynamic,” Farley told analysts.

Stellantis invests more than $100 million in California lithium project

Stellantis said it would invest more than $100 million in California's Controlled Thermal Resources, its latest bet on the direct lithium extraction (DLE) sector amid the global hunt for new sources of the electric vehicle battery metal. The investment by the Chrysler and Jeep parent announced on Thursday comes as the green energy transition and U.S. Inflation Reduction Act have fueled concerns that supplies of lithium and other materials may fall short of strong demand forecasts. DLE technologies vary, but each aims to mechanically filter lithium from salty brine deposits and thus avoid the need for open pit mines or large evaporation ponds, the two most common but environmentally challenging ways to extract the battery metal. Stellantis, which has said half of its fleet will be electric by 2030, also agreed to nearly triple the amount of lithium it will buy from Controlled Thermal, boosting a previous order to 65,000 metric tons annually for at least 10 years, starting in 2027. "This is a significant investment and goes a long way toward developing this key project," Controlled Thermal CEO Rod Colwell said in an interview. The company plans to spend more than $1 billion to separate lithium from superhot geothermal brines extracted from beneath California's Salton Sea after flashing steam off those brines to spin turbines that will produce electricity starting next year. That renewable power is expected to cut the amount of carbon emitted during lithium production. Rival Berkshire Hathaway has struggled to produce lithium from the same area given large concentrations of silica in the brine that can form glass when cooled, clogging pipes. Colwell said a $65 million facility recently installed by Controlled Thermal can remove that silica and other unwanted metals. DLE equipment licensed from Koch Industries would then remove the lithium. "We're very happy with the equipment," he said. "We're going to deliver. There's just no doubt about it." Stellantis CEO Carlos Tavares called the Controlled Thermal partnership "an important step in our care for our customers and our planet as we work to provide clean, safe and affordable mobility." Both companies declined to provide the specific investment amount. Controlled Thermal aims to obtain final permits by October and start construction of a commercial lithium plant soon thereafter, Colwell said. Goldman Sachs is leading the search for additional debt and equity financing, he added.

UAW to vote on strike authorization amid claims Detroit talks are moving slowly

DETROIT — About 146,000 members of the United Auto Workers union will vote next week whether to authorize their leaders to call strikes against the Detroit automakers. Union President Shawn Fain told members in a Facebook Live appearance Tuesday that the talks, which started in mid-July, are moving slowly and have yet to get to wages and other economic issues. The union's contracts with General Motors, Ford and Stellantis expire in about a month, at 11:59 p.m. Sept. 14. “If we want to make progress at the bargaining table, we need to show the companies that it's not just talk,” Fain said of the strike vote. He told local offices to report the results of their votes to the union headquarters by Aug. 24. Strike authorization votes are a routine part of contract talks and are often overwhelmingly approved, but Fain said the vote is a sign of the union's strength. Fain has set high expectations for the contract talks and says the union will seek more than 40% general pay raises over four years, restoration of pensions for newer hires, cost-of-living increases, an end to wage tiers, and other benefits. He has said workers can make big gains but must be ready to strike to get them. The union also wants guarantees that it will represent workers at 10 U.S. electric vehicle battery plants proposed by the companies. Most are joint ventures with Korean battery companies. Much of Fain's rhetoric has been focused on Stellantis, the most profitable of the three companies with the highest profit margins. Fain has complained that Stellantis is seeking concessions in the contract when the union wants gains. But a union spokesman said singling out Stellantis doesnÂ’t mean the UAW has picked a company as a strike target, and it could choose all three. He said the union doesn't plan to extend the contracts beyond Sept. 14. Automakers say they are facing billions of dollars in development costs as the industry shifts from combustion engines to electric vehicles. In a letter to employees last week, Stellantis Chief Operating Officer Mark Stewart accused Fain of “theatrics and personal insults” that Stewart said will not help to reach a deal. He wrote that the company is committed to an agreement based on “economic realism” that supports the viability of Stellantis' operations while rewarding workers. The company, he wrote, wants to find solutions to protect Stellantis from nonunion companies with lower costs and additional costs from moving to electric vehicles. “Mr.

Junkyard Gem: 1995 Eagle Vision TSi

Lee Iacocca's main motivation to have Chrysler buy the American Motors Corporation in 1987 was to grab the Jeep brand, but it turned out that getting all the chassis engineering that went into the Eagle Premier paid off handsomely as well. The Premier's ancestry was Wisconsin-tinged Renault, a mashup of Renault 25 and 21 chassis and suspension design, and Chrysler later based the very successful LH series of sedans on the Premier. The Eagle-badged version of the LH was the Vision, sold for the 1993 through 1997 model years. Here's one of those cars, heavily battered and its once-lurid purple paint now faded, found in a self-service yard south of Denver, Colorado. The Eagle brand was named after the AMC Eagle, and it was used for both ex-AMC vehicles and Mitsubishi machinery. It got the axe after 1998, when the final Talons were sold. The first-generation LH cars included the Vision, the Chrysler Concorde, the Chrysler LHS, the Chrysler New Yorker and the Dodge Intrepid. A Plymouth version known as the Accolade was planned but never went into production. The crash that mangled the front end made it impossible for me to open the hood, but the '95 Vision TSi got a 3.5-liter OHC V6 with 214 horsepower and 221 pound-feet. Every production Vision ever built came with a mandatory four-speed automatic transmission. This car made it just a bit past 167,000 miles during its life. All in all, a comfortable Detroit sedan on a French suspension that sold fairly well and then faded into oblivion. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. So much cheaper than the Acura Legend! This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Virtual reality speculation was all the rage during the first half of the 1990s. And, hey, it still is! This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. The middle 1990s were a strange time.

7 major automakers to build open EV charging network

A new joint venture established by BMW, GM, Honda, Hyundai, Kia, Mercedes-Benz and Stellantis will build a new North American electric vehicle charging network on a scale designed to compete with Tesla's industry-benchmark Supercharger network. The 30,000-plus planned new chargers will accommodate both Tesla's almost-standard North American Charging System (NACS) and existing automakers' Combined Charging System (CCS) options, effectively guaranteeing compatibility with the vast majority of current and upcoming electric models — whether they're from one of the involved automakers or not.  "With the generational investments in public charging being implemented on the Federal and State level, the joint venture will leverage public and private funds to accelerate the installation of high-powered charging for customers. The new charging stations will be accessible to all battery-powered electric vehicles from any automaker using Combined Charging System (CCS) or North American Charging Standard (NACS) and are expected to meet or exceed the spirit and requirements of the U.S. National Electric Vehicle Infrastructure (NEVI) program." Critically, the automakers involved will have a say in how the charging tech is implemented, guaranteeing that the hardware will play nicely with each automaker's in-house charging systems. Hyundai and Kia, for example, were hesitant to jump on board the Tesla NACS bandwagon earlier this year over concerns that the Supercharger network is insufficient for powering the two automakers' 800-volt charging systems; similar tech is used by Volkswagen and Porsche.  In addition to providing much-needed capacity and high-output charging for America's growing fleet of electric cars and trucks, the new network will integrate seamlessly with each automaker's in-app and in-vehicle features, rather than forcing customers to use third-party tools and payment systems, as is the case with some existing public charging infrastructure.  "The functions and services of the network will allow for seamless integration with participating automakersÂ’ in-vehicle and in-app experiences, including reservations, intelligent route planning and navigation, payment applications, transparent energy management and more. In addition, the network will leverage Plug & Charge technology to further enhance the customer experience," the announcement said.

Last call for Chrysler 300C, Dodge Charger, Challenger: Get your orders in by July 31

We’ve known for a while that the Dodge Challenger and Charger, along with the Chrysler 300C, were going away, and we now have a production end date for the long-running trio of big cars. Earlier this week, we learned that the order books for all three will close at the end of July, ahead of closing production at the end of the year. The 300C has been around since the 2005 model year and has been on sale relatively unchanged since 2011. Chrysler has updated the powertrain choices and technology over the years, but the car we see on sale today is nearly identical to the car we first saw when President George W. Bush was in office. Though it shares a platform and some underlying engineering with the Dodge Charger and Challenger, Chrysler hasnÂ’t gone to the lengths that Dodge did to give the 300C a proper sendoff. Dodge pulled out all the stops with its large cars, offering a series of “Last Call” models highlighting the carsÂ’ power and history. That said, Chrysler did release a limited-production 300C for 2023 that offers a 6.4-liter Hemi V8. ItÂ’s held to 2,000 units and doesnÂ’t have the swagger that DodgeÂ’s cars bring, but there are a few reasons to be excited about the final 300C. With 485 horsepower and 475 pounds of torque on tap, the car can reach 60 from a standstill in 4.3 seconds and run the quarter mile in 12.4 seconds. Those are serious numbers for any car, let alone one that feels like a Barcalounger on wheels. Other upgrades for the final 300C include a 3.09 limited-slip differential, an active exhaust system, and active suspension. If the 300C speaks to you in a way that other rolling sofas donÂ’t, itÂ’s likely too late to grab a limited-production car, but Chrysler is offering the standard 300 — for now.

Stellantis aims to eliminate separate inverter, charger to improve EV efficiency

Stellantis has announced that, in collaboration with French battery company Saft and French National Center for Scientific Research, has made significant progress in eliminating two major components of an electric vehicle powertrain: the on-board charger and the power inverter for the motor. The company claims that doing this will allow for better space use in vehicles, as well as improvements in efficiency, cost and reliability of components. As a quick primer, also explained in the below video, the on-board charger and power inverter are sort of translators to get the right current to different parts of the electric powertrain. The on-board charger takes AC power from the grid and converts it to DC to charge the batteries. Then when power goes from the batteries to the electric motor, the power inverter converts that DC power back to AC. These components aren't exactly small. Frequently you'll find them packaged somewhere under the hood. What Stellantis and its cohorts have developed, and have been using on a test vehicle since last summer, are small power inverter boards that can be mounted very closely to the battery packs. They can handle both conversion needs, for charging and discharging, instead of needing two separate devices. The most obvious perk to this is that you can do away with those traditional components and free up more space, either for making smaller vehicles without losing interior volume, or adding space to a vehicle that wouldn't have had it otherwise. There's the additional benefit of reduced weight, something that EVs struggle with. Stellantis also claims improvements in efficiency, reliability, and cost, however, it didn't go into detail as to how this setup would do that exactly. We'll try to get in touch with representatives from Stellantis in order to get more information. We're still a ways out from seeing this technology in production Stellantis vehicles. The company said it aims to apply it to vehicles by the end of the decade. Saft is also looking at using it on stationary battery systems as well. So maybe we'll see it on a 2029 Ram 1500 REV, but for now, we'll be living with traditional chargers and inverters. Related Video: Green Alfa Romeo Chrysler Dodge Fiat RAM Technology Electric

Junkyard Gem: 1990 Chrysler LeBaron GT Convertible

When Chrysler sprang back to life under Lee Iacocca and his K-Cars, the flagship of the new front-wheel-drive order was the luxurious new 1982 LeBaron convertible, which shoved aside the drab and antiquated Dodge Diplomat-based 1981 LeBaron. The LeBaron sedan got the axe after 1989, with only sporty coupes and devil-may-care ragtops given LeBaron badges after that. Here's an example of the third-generation LeBaron convertible, found in a Colorado wrecking yard a few months ago. There were four trim levels of LeBaron convertible available for the 1990 model year: Highline, Premium, GT and GTC. Today's Junkyard Gem is a second-from-the-top GT, which had an MSRP of $17,799 (about $43,383 in 2023 dollars). The intake manifold may bear the Chrysler name, but this engine is three liters of pure Mitsubishi 6G72 power. With 141 horsepower and 171 pound-feet, this engine was  standard equipment on the GT convertible (if you bought the GTC Coupe, you got a 175-horse 2.5-liter turbocharged four-cylinder). The idea of a Detroit luxury machine with a manual transmission seems strange today… and it was also somewhat strange 33 years ago. The original buyer of this car almost certainly had the money for the optional automatic ($552, or $1,314 today) but preferred the five-on-the-floor manual. With a curb weight of just 2,775 pounds, this car would have been plenty of fun to drive with a three-pedal setup. The resemblance between this car and its far more expensive first cousin, Chrysler's TC by Maserati, was all too obvious to TC shoppers. Yes, that's genuine Corinthian Leather on the seats. Driver's-side airbags were rare on 1990 US-market cars, but Chrysler was ahead of the competition with this safety feature. This car nearly reached 275,000 miles during its life. Who says a convertible doesn't make a good daily commuter? It looks to have been in good condition at the end, though the driver's door latch mechanism needed to be reattached via welding repairs at some point. The retractable headlight covers are open in these photos. Chrysler ditched the hidden headlights for the 1993 LeBarons; production ended after 1995. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. There is no luxury without engineering. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. In Canada, Celine Dion pitched this generation of LeBaron convertible.