Chrysler 300H, page #6

Auto blog

Prosecutors indict three FCA employees in alleged emissions-cheating case

Federal prosecutors indicted three Fiat Chrysler Automobiles (FCA, now Stellantis) employees as part of an investigation into alleged emissions cheating. Charges unsealed on April 20, 2021, accuse the defendants of helping rig the emissions control system fitted to the 3.0-liter turbodiesel V6 used in some models during the 2010s. Prosecutors claim Emanuele Palma, Sergio Pasini, and Gianluca Sabbioni played a determining role in developing a defeat device that allowed the V6 to obtain certification from the Environmental Protection Agency (EPA) while polluting too much in normal driving conditions. Jeep and Ram began making the engine available in the Grand Cherokee and the 1500, respectively, in 2014, but the charges state plans to game the EPA started in 2011. Palma, Pasini, and Sabbioni knowingly mislead federal regulators, the charges claim; they called it "cycle beating," according to The Detroit News. While the three men were part of FCA's research and development department, they started the project while working for an Italian supplier named VM Motori, which FCA purchased in 2013. Pasini and Sabbioni are each charged with one count of conspiracy to defraud the United States and to violate the Clean Air Act, one count of conspiracy to commit wire fraud, and six counts of violating the Clean Air Act. They could spend several years behind bars if they're found guilty. Both are currently in their home country of Italy. Palma's legal troubles are more serious. He was charged with several counts in September 2019, though four wire fraud charges were dropped in November 2020. He lives in Bloomfield Hills, a city located on the far outskirts of Detroit. Prosecutors claim motorists spent over $4 billion on over 100,000 trucks and SUVs fitted with the non-compliant engine between January 2013 and September 2017. FCA has already agreed to pay $800 million to resolve civil claims from the Justice Department, state officials and customers, though it significantly has not admitted guilt. It stressed that "it did not engage in any deliberate scheme to install defeat devices to cheat emissions tests."

Editors' Picks March 2021 | Ford Mustang Mach-E, Polestar 2, Land Rover Defender and more

The month of March was unofficial minivan month here at Autoblog. We drove all of them but the Kia Carnival, but don’t worry, you wonÂ’t have to wait much longer to read that review. Among all the family-toting machines, we drove some more exciting vehicles including the Land Rover Defender and a pair of up-and-coming EVs. It was a month of excellent cars, meaning that this monthÂ’s litter of EditorsÂ’ Picks is stacked. In case you missed FebruaryÂ’s picks, hereÂ’s a quick refresher on whatÂ’s going on here. We rate all the new cars we drive with a 1-10 score. Cars that are exemplary or stand out in their respective segments get EditorsÂ’ Pick status. Those are the ones weÂ’d recommend to our friends, family and anybody whoÂ’s curious and asks the question. The list that youÂ’ll find below consists of every car we rated in March that earned the honor of being an EditorsÂ’ Pick. 2021 Ford Bronco Sport 2021 Ford Bronco Sport First Edition View 32 Photos Quick take: Ford's baby Bronco is an authentic foil to the big Bronco 2-Door and 4-Door. It brings rugged styling, better-than-average off-road capability and thoughtful utility features to a generic segment of cars. Score: 8 What it competes with: Jeep Compass, Jeep Cherokee, Mazda CX-30, Subaru Crosstrek, Kia Seltos, Chevrolet Trailblazer Pros: Stellar design, excellent off-road, clever interior details throughout Cons: Pricier than most, average transmission, underwhelming interior quality and ambiance in lowest trims From the editors: Road Test Editor Zac Palmer — “I genuinely enjoy driving this cute crossover. It feels like a mini truck on the road, and Ford admirably translated the design from its big Bronco over to this Escape-based crossover. News Editor Joel Stocksdale — "The Bronco Sport isn't perfect, the transmission could use some work, and it's a little bumpy, but it's a characterful little thing with loads of style, great visibility and space, and impressive capabilities on and off road in the powerful Badlands form." In-depth analysis: 2021 Ford Bronco Sport Review | Bronco for the masses   2021 Land Rover Defender 2021 Land Rover Defender 110 View 64 Photos Quick take: The Land Rover Defender provides everything you'd hope for in a modern Land Rover: superlative off-road capability, surprisingly plush on-road demeanor, abundant interior space and abundant character. The base four-cylinder is likely all you'll need and lower trim levels provide more than enough equipment.

Driving the Toyota Tacoma, BMW 430i and Chevy Corvette Convertible | Autoblog Podcast #671

In this week's Autoblog Podcast, Editor-in-Chief Greg Migliore is joined by West Coast Editor James Riswick and Road Test Editor Zac Palmer. First, they talk about driving the Toyota Tacoma TRD Off-Road (equipped with a TRD Lift Kit), Mini Cooper S Hardtop 2-Dor, BMW 430i xDrive, Chevy Corvette Convertible and Chevy Suburban with the Duramax diesel engine. They discuss the news, including Toyota's desire to differentiate the 86 from the BRZ, the new Jeep Magneto concept and Greg's opinion piece on why Stellantis needs Chrysler. Last, but not least, they dig into the mailbag to help a listener figure out how to replace their Honda S2000 and Honda Fit. Autoblog Podcast #671 Get The Podcast iTunes – Subscribe to the Autoblog Podcast in iTunes RSS – Add the Autoblog Podcast feed to your RSS aggregator MP3 – Download the MP3 directly Rundown Cars We're Driving 2021 Toyota Tacoma TRD Off-Road 2021 Mini Cooper S Hardtop 2 Door 2021 BMW 430i xDrive 2021 Chevy Corvette Convertible 2021 Chevy Suburban Duramax diesel News Toyota 86 reportedly delayed to differentiate it from Subaru BRZ Jeep Magneto: Electrifying the Easter Jeep Safari with a Wrangler EV Why Stellantis needs Chrysler Spend My Money Feedback Email – Podcast@Autoblog.com Review the show on iTunes Autoblog is now live on your smart speakers and voice assistants with the audio Autoblog Daily Digest. Say “Hey Google, play the news from Autoblog” or "Alexa, open Autoblog" to get your favorite car website in audio form every day. A narrator will take you through the biggest stories or break down one of our comprehensive test drives. Related Video: Podcasts BMW Chevrolet Chrysler GM MINI Toyota Truck Coupe SUV Diesel Vehicles Luxury Off-Road Vehicles Performance

The Chrysler Pacifica has clever 'Stow 'n Place' roof rack crossbars

While we focused yesterday on all the places you can store stuff (and especially bottles) inside the Toyota Sienna interior, today I thought I'd point out how another minivan makes it easier to store stuff up on the roof. The 2021 Chrysler Pacifica includes a clever integrated roof rack system dubbed "Stow 'N Place" that basically lets you store the cross bars on the van itself rather than somewhere in the garage. But wait, can't you always just leave crossbars on your car? Sure, if you want to live with extra wind noise and a fuel economy reduction. You see, the Pacifica stores them flush within a rail unit running length-wise with the roof. Basically, they're hidden away until you need them. The Subaru Outback has something similar to this, which we've previously reviewed. With its integrated crossbars, you just flip open a latch, fling the bar to the opposite side of the car and plug it in. Then repeat. It couldn't be simpler. Although the Chrysler system is more complicated, it does have a key advantage. Let's see how they work.  Chrysler tries to use chrome trim in order to create the visual illusion of raised roof rails from afar, but up close ... ... they clearly aren't. It's just a G.O.B.-grade illusion created by the chrome trim arching over black plastic trim.  You have to unscrew each end of the bars by turning these little pieces.  The bars are then completely detached from the van. You then have to articulate each of the bars so that they go from their straight, flush-mounted position to the necessary raised position. That's quite easy to do. Be careful, though as these suckers are sturdy metal. You don't want to drop one onto those fancy glass roof panels.  Subaru avoids all this and allows you to simply swing the bar across by utilizing a bulky rail housing that raises them up to the necessary height, but provides a visual that probably gives some car designers nightmares.   There are letters at each mounting point that align to those on a bar end. So, make sure to go A with A, D with D, etc.  However, you have two options for placing the C/D bar, meaning you're not stuck with a one-size-must-fit-all gap as with the Subaru. This is without question the advantage to Chrysler's approach here. So voila! What once didn't have crossbars now has them. It might not take seconds as with the Outback, but they're sure-as-hell quicker and easier to install than aftermarket crossbars.

1963 Chrysler Turbine Car is for sale, and it's the coolest car you can buy

If you have a lot of money, there are a lot of really wild and exciting cars to choose from. But I feel confident in saying that none of them, none of them, can come close to being as brilliantly badass as this 1963 Chrysler Turbine Car, first spotted by Barn Finds, which, yes, is actually something you can buy and own. And even drive! Here's a quick recap of the Turbine Car in case you're unfamiliar. Back in the 1960s, Chrysler was researching turbine engines for vehicle propulsion, and to get an idea for how well they would work in the real world, they built 5 prototype cars followed by 50 production models. Those latter models did a tour to just over 200 families, each of which spent 90 days driving the cars. According to Motor Trend, the engine produced 130 horsepower and 425 pound-feet of torque, and it was paired with a three-speed automatic. Afterward, the cars were returned to Chrysler, which eventually decided that turbine engines weren't the way of the future. According to Hyman Ltd., the company selling this example, only nine Turbine Cars were spared the crusher, and six were sent to museums. This was one of the cars Chrysler held onto, and it was occasionally loaned to executives and such. It was then sold to William Harrah for his collection and museum near Reno. It later was sold to the founder of Domino's Pizza, and then to the latest owner, Frank Kleptz. Kleptz then worked with GE Engine Services to rebuild the engine and make the car run again. As it sits, the car features its original paint, trim and interior. It comes with spare parts and various documents. And of course it oozes cool, from the whistling engine under the hood to the jet-inspired, Ghia-built body and sleek interior. Plus, you can be sure you won't see another one on the road, unless you happen to be cruising by Jay Leno's garage in Burbank, Calif. It really doesn't get cooler than this. Hyman hasn't listed a price for it, but we're sure it will sell for a massive amount, and it would probably be money well spent. Correction: A previous version of this story incorrectly stated that Bill Harrah's car collection was in Las Vegas, it was actually near Reno. The text has been updated to reflect this. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.    

FCA's UAW workers to get $8,010 profit-sharing payout

UAW workers at FCA will soon be receiving $8,010 checks, which represent profit-sharing based on the company's 2020 performance. Although FCA's profit margins in 2020 were slimmer than the year prior, the union-employee payouts are slightly larger, due to a change in the formula that was negotiated in 2019 and has now gone into effect. Employees are now paid $900 for every 1% of profit margin FCA achieves in its North American operations. For 2020, the company enjoyed an 8.9% profit margin, and although that was down slightly from 9.1% in 2019, the checks are larger than last year's $7,280 payout. Still, FCA employees didn't fare quite as well as their counterparts at GM, who stand to receive profit-sharing checks of up to $9,000. GM workers did even better last year, netting $10,000. UAW workers at Ford had less to celebrate. They'll receive $3,525, based on the company's 2020 performance. That's a steep drop from last year's $6,600. FCA earned $6.472 billion in North America in 2020. The company is expecting an improved financial performance in 2021, as it's expected to avoid another coronavirus-related shutdown. It's also expected to benefit from the launch of the three-row Grand Cherokee L, as well as the Jeep Wagoneer and Grand Wagoneer, all of which are high-margin products. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Stellantis reports surprising 2020 results, is 'off to a flying start'

MILAN — Low global car inventories and cost cuts should boost Stellantis's profit margins this year, though a shortage of semiconductors and investments in electric vehicles could weigh on results, the newly-formed automaker said on Wednesday. The forecast came as Stellantis, created by the January merger of Peugeot-maker PSA and Fiat Chrysler (FCA), reported better-than-expected results for 2020 that sent its shares up around 3% in morning trading. "Stellantis gets off to a flying start and is fully focused on achieving the full promised synergies (from the merger)," Chief Executive Carlos Tavares said in a statement. Stellantis is the world's fourth largest carmaker, with 14 brands including Fiat, Peugeot, Opel, Jeep, Ram and Maserati. It said 2021 results should be helped by three new high-margin Jeep vehicles in North America and a strong pricing environment there. The U.S. market has driven profits for years at FCA and starts off as the strongest part of Stellantis. The group's guidance assumes no more significant lockdowns caused by the global COVID-19 pandemic, which shuttered auto plants around the world last spring. Stellantis should also get a lift as its starts to implement a plan aimed at delivering over 5 billion euros a year in savings, without closing any plants. Tavares has also pledged not to cut jobs. But a pandemic-related global shortage of semiconductors, used for everything from maximizing engine fuel economy to driver-assistance features, could hurt business. Auto industry executives have said the shortage should ease by the second half of 2021. Stellantis said its "electrification offensive" could also weigh on results this year. Automakers are racing to develop electric vehicles to meet tighter CO2 emissions targets in Europe and this week Volvo joined a growing number of carmakers aiming for a fully-electric line-up by 2030. Stellantis plans to have fully-electric or hybrid versions of all of its vehicles available in Europe by 2025, broadly in line with plans at top rivals such as Volkswagen and Renault-Nissan, although Stellantis has further to go to meet that goal. The carmaker is targeting an adjusted operating profit margin of 5.5%-7.5% this year. That compares with a 5.3% aggregated margin last year: 4.3% at FCA and 7.1% at PSA excluding a controlling stake in parts maker Faurecia, which is set to be spun-off from Stellantis shortly.

Fiat Chrysler pleads guilty to paying off Detroit union officials

DETROIT — Fiat Chrysler pleaded guilty to conspiracy Monday, admitting that it paid off leaders of the United Auto Workers to try to win concessions in negotiations covering thousands of factory workers. FCA's conviction follows a series of guilty pleas from UAW officials who were showered with more than $3.5 million in cash and items of value from a jointly run training center over an eight-year period. FCA stands for Fiat Chrysler Automobiles, which now is part of Stellantis, a company created by the merger of Fiat Chrysler and PSA Peugeot. “FCA violated federal labor law and undermined the collective bargaining process and the faith of the UAWÂ’s membership in their leaders,” said acting U.S. Attorney Saima Mohsin. The head of FCA labor relations, Al Iacobelli, executed the scheme with five UAW officials and a spouse, especially General Holiefield, who was a union vice president. He eliminated a $262,000 home mortgage in 2014 with training center money. Union officials used credit cards for spending sprees. “Your honor, we plead guilty,” FCA general counsel Chris Pardi told U.S. District Judge Paul Borman. Iacobelli was sentenced to 5 1/2 years in prison in 2018, but the sentence was recently reduced by 18 months due to his cooperation. Holiefield died in 2015; his wife pleaded guilty to a tax crime three years later. Holiefield's successor, Norwood Jewell, was sentenced to 15 months in prison. His plea deal listed $60,000 in meals and golf paid with training center credit cards. FCA will pay a $30 million fine to the government. An independent monitor will be appointed to oversee the end of the training center as well as handle other tasks. The government's investigation became public in 2017, but agents soon were uncovering other corruption at the UAW. Union dues were used to pay for golf, booze and vacation villas in California, and contractors were giving kickbacks for union business. Eleven officials have been convicted, including former presidents Gary Jones and Dennis Williams. They are awaiting their sentences in Detroit federal court. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Earnings/Financials Government/Legal UAW/Unions Chrysler Fiat

Stellantis axed the SRT engineer team, but performance isn't going away

Stellantis has broken up the Street & Racing Technology (SRT) engineering team that created over a dozen high-performance vehicles, including the Dodge Charger Hellcat, but the situation isn't as dire as it sounds. The newly-formed company assigned SRT's former engineers to different positions, where they'll continue to make hot rods. "All of the core elements of the SRT performance engineering team have been integrated into our company's global engineering organization," a spokeswoman told enthusiast website Mopar Insiders. She added that integrating SRT's personnel into other brands in the Stellantis portfolio will ensure that the lessons learned from decades of peddling speed will permeate other products. Previously, SRT operated with a high degree of independence. Don't get too excited. Her statement does not necessarily mean that Citroen will begin building cars powered by the Hellcat engine, though a C3 Chat D'enfer sounds absolutely epic. Technology transfer will likely be limited to fields like aerodynamics and thermal management, and the design department might learn a couple of neat new tricks. Dodge will still move forward with the development of its next SRT-branded cars; the decision to dissolve the SRT team will not affect future models, according to the spokeswoman. Whether they'll be powered by a V8 is up in the air, because company boss Tim Kuniskis warned that regulations are killing the eight-cylinder engine. Similarly, Jeep will continue designing high-performance models, like the Grand Cherokee Trackhawk. What changes is that the model will be developed and designed by a group of engineers and designers from Jeep, not from SRT. SRT is dead, but performance isn't going away. SRT's demise nonetheless marks the end of an era for Chrysler. The division traces its roots to 1989, when some of the company's brightest minds were brought together to develop the first-generation Dodge Viper. It merged with Team Prowler to form the Specialty Vehicle Engineering (SVE) group, which was renamed Performance Vehicle Operations (PVO) in 2002 and finally dubbed SRT in 2004. SRT has operated as the carmaker's in-house tuner since, its resume includes a diverse selection of cars ranging from the Neon SRT-4 to the 1500 TRX, and it was promoted to a standalone brand led by designer Ralph Gilles in 2011. Fiat-Chrysler Automobiles (FCA) axed the SRT brand in 2014 but kept the name and the development team. Related video:

Polaris Slingshot, Tesla cryptocurrency and an electric Jeep concept | Autoblog Podcast #664

In this week's Autoblog Podcast, Editor-in-Chief Greg Migliore is joined by Consumer Editor Jeremy Korzeniewski. They kick things off by talking about the 2020 Polaris Slingshot, which Jeremy got a chance to sample before the weather turned cold. Then, they pivot to news, starting with the fact that Peugeot's previously rumored return to American is very likely dead, but Stellantis plans to keep FCA's North American brands alive, at least for now. That's followed by Jeep's announcement that it will bring an all-electric model to its annual Easter Jeep Safari in Moab, Utah. They get into the idea of cryptocurrency transactions in car shopping, followed by some grim news at Harley-Davidson, which is attempting a new pivot.  Autoblog Podcast #664 Get The Podcast iTunes – Subscribe to the Autoblog Podcast in iTunes RSS – Add the Autoblog Podcast feed to your RSS aggregator MP3 – Download the MP3 directly Rundown What we're driving: 2020 Polaris Slingshot   News Stellantis dealers plead that letting Chrysler die is not an option Jeep will bring an electric Wrangler to Moab this spring Buy a car with bitcoin? Some car dealers have been years ahead of Tesla Harley kickstarts 5-year turnaround plan after surprise quarterly loss Feedback Email – Podcast@Autoblog.com Review the show on iTunes Autoblog is now live on your smart speakers and voice assistants with the audio Autoblog Daily Digest. Say “Hey Google, play the news from Autoblog” or "Alexa, open Autoblog" to get your favorite car website in audio form every day. A narrator will take you through the biggest stories or break down one of our comprehensive test drives. Related Video: Auto News Earnings/Financials Green Podcasts Chrysler Jeep Automakers Green Driving Transportation Alternatives Convertible Motorcycle Road Tests