Find or Sell Used Cars, Trucks, and SUVs in USA

2004 Chevy Venture White 130.000 Mile Wifes Van Buying New Car Run Great Look Gr on 2040-cars

Year:2004 Mileage:126000 Color: White /
 Gray
Location:

Dearborn Heights, Michigan, United States

Dearborn Heights, Michigan, United States
Advertising:
Transmission:Automatic
Body Type:Minivan, Van
Vehicle Title:Clear
Engine:3.4L 207Cu. In. V6 GAS OHV Naturally Aspirated
Fuel Type:Gasoline
For Sale By:Private Seller
VIN: 1gndx03ex4d244619 Year: 2004
Make: Chevrolet
Model: Venture
Trim: Plus Mini Passenger Van 4-Door
Options: CD Player
Safety Features: Anti-Lock Brakes, Driver Airbag, Passenger Airbag, Side Airbags
Drive Type: AWD
Power Options: Air Conditioning, Cruise Control, Power Locks, Power Windows
Mileage: 126,000
Exterior Color: White
Interior Color: Gray
Warranty: Vehicle does NOT have an existing warranty
Condition: UsedA vehicle is considered used if it has been registered and issued a title. Used vehicles have had at least one previous owner. The condition of the exterior, interior and engine can vary depending on the vehicle's history. See the seller's listing for full details and description of any imperfections.Seller Notes:"look great run great wife's car"

up for sale 2004 Chevy venture white 123.000 mile run great buying new car for the wife need to sell drive great

Auto Services in Michigan

Wohlford`s Brake Stop ★★★★★

Auto Repair & Service, Brake Repair
Address: 3613 Viaduct St SW, Burnips
Phone: (616) 532-7781

Wilder Auto Service ★★★★★

Auto Repair & Service, Brake Repair, Automobile Accessories
Address: 1510 Star School Rd, Dowling
Phone: (269) 948-2192

Valvoline Instant Oil Change ★★★★★

Auto Repair & Service, Auto Oil & Lube, Automotive Tune Up Service
Address: 1325 S Drake Rd, Comstock
Phone: (269) 372-2781

Trend Auto Sales ★★★★★

New Car Dealers, Used Car Dealers, Wholesale Used Car Dealers
Address: 21612 Schoenherr Rd, Grosse-Pointe-Shores
Phone: (586) 939-0230

Transmission Authority ★★★★★

Auto Repair & Service, Brake Repair
Address: 6900 Cooley Lake Rd, South-Lyon
Phone: (248) 363-1414

The Collision Shop ★★★★★

Auto Repair & Service, Automobile Body Repairing & Painting
Address: 5479 E 12 Mile Rd, Grosse-Pointe-Park
Phone: (586) 806-5076

Auto blog

Why an independent rear suspension for GM's new, full-sized SUVs wasn't easy

Mon, Dec 23 2019

A Motor Trend report last month laid out how Cadillac's 4.2-lier twin-turbo Blackwing V8 could be an orphan due to cost concerns in the GM empire. Last-minute chassis changes to Cadillac's new sedans and XT6 crossover led to engine bays that couldn't fit the Blackwing. On the SUV side, according to the report, the new independent rear suspension for big people haulers cost so much to implement that GM ruled out reworking the Escalade to accept the Blackwing. At least one commenter rightly asked how could a suspension swallow that much money. A new piece in Motor Trend has the answer. The excellent Alissa Priddle spoke to Tim Herrick, GM's executive chief engineer for full-size trucks, about why the clean-sheet IRS cost "multimillions of dollars."  First, GM would need to build a new body shop at the Arlington, Texas plant that assembles the automaker's big SUVs to stamp the numerous wholly new parts and panels accommodating an IRS. Then GM would need to design and pay for a new assembly process. On top of those up-front costs, there was the incremental cost of the four-link IRS components being more expensive than those in the trucks' former leaf-sprung solid axles. Herrick endured so many rejections for so long that he remembers the date and time when he got approval for the new unit. He said it came down to a meeting where he told a higher-up, "I'll make you a deal: If we get to the reveal, or if we launch this and you think this was a dumb idea, I'll hand you my badge and let you walk me out." Head to Motor Trend to read the full story. Based on Herrick being on stage to help present the new SUVs to the press, and on our First Ride in the new Chevrolet Tahoe and Suburban at GM's Milford Proving Grounds, it appears this will have a happy ending for all involved. Furthermore, since Herrick worked on the T1 platform that supports the big SUVs as well as the light- and heavy-duty pickups, he understood the demands on the commercial side, too. That could be why when Roadshow asked Tim Asoklis, chief engineer of the Tahoe and Suburban, if the new IRS could endure life in the Chevrolet Silverado and GMC Sierra, Asoklis answered, "Oh, absolutely." Related Video:    

GM recalling 118K Colorado, Canyon pickups over missing hood latches

Thu, 20 Dec 2012

General Motors has announced a recall of 118,800 Chevrolet Colorado and GMC Canyon pickup trucks due to the possibility of secondary hood latches not being installed at the time of manufacture. The affected vehicles are from the 2010, 2011 and 2012 model years, all of which were built between November 9, 2009 and August 28, 2012.
According to the official National Highway Traffic Safety Administration report, these trucks fail to "comply with the requirements of Federal Motor Vehicle Safety Standard No. 113, 'Hood Latch System.' The hood may be missing the secondary hood latch." In other words, owners of these trucks could find their vehicles' hoods opening unexpectedly while driving.
The official recall campaign is expected to begin on January 17, 2013. Dealers will inspect the affected pickups and if a secondary hood latch is not present, one will be installed free of charge. Scroll down to read the official NHTSA report.

Our favorite mid-engine Corvette theories and rumors

Tue, Sep 13 2016

The mid-engine Corvette! We just saw blurry photos through the foliage, and are hearts are all aflutter because it means that this car is real. And it's the most " never before" Corvette since 1984. Which leads us to all kinds of wacky theories and speculation. Everybody knows something or heard from a guy. None of those guys (or gals) from GM are talking to Autoblog, to be clear. But that won't stop us from stirring the pot. Let's go over a few point-by-point. The pushrod engine will be replaced by an overhead-cam V8 Car and Driver has repeatedly reported that an overhead-cam engine will come after the mid-engine Corvette's debut with an old-school pushrod. We've heard the same thing firsthand, albeit from a source with no connection to the development of the Corvette or powertrain. "At some point two valves can't pass future emissions regulations," said the guy we know. While the pushrod engine is compact, the design makes it difficult - if not impossible - for sophisticated variable valve timing (and lift) systems that control combustion with more precision. Hasty conclusion: The pushrod engine has a finite life in front of it. This one's a lock, it's a just a matter of when. Bowling Green's new paint shop is really the mid-engine assembly line Credit to Reddit for this one. Like we said, everybody knows a guy. But let's look deeper. The new paint facility costs $439 million dollars and adds 450,000 square feet, almost half the size of the existing plant. Plus GM announced another $290 million in upgrades at Bowling Green Assembly. That sure sounds like a lot of money, but you can actually spend that much on a paint booth. Porsche spent 500 million Euros (about $561 million dollars) to add the Macan assembly to its Leipzig, Germany plant in 2014. Chrysler shelled out $850 million for a paint shop in Sterling Heights, Michigan. GM spent $600 million for a new paint shop at the Fairfax (Kansas City) plant. Honda, on the other hand, is working on a thrifty $210 million project in Marysville, Ohio that includes a 300,000 square foot expansion, and the low-volume Acura NSX facility only cost $70 million. Hasty conclusion: The square footage and cost could easily mean a new assembly line instead of (or in addition to) a paint line. And if the NSX plant was really that cheap, GM could have hidden a similar sum in its existing announcements.