2007 Chevrolet Tahoe Ltz Sport Utility 4-door 5.3l on 2040-cars

Auto blog

NHTSA probes 2010 Chevy Tahoe for side airbag issue

After a person was killed in a rollover accident in a 2010 Chevrolet Tahoe in Texas in 2011, the National Highway Traffic Safety Administration is considering whether to conduct a deeper investigation into a potential problem with the model's side airbags. According to the petition filed with the government agency, the SUV's rollover side curtain airbag deployed in the accident, but the design allegedly still allowed some of the occupants in the second- and third-row seats to be ejected from the vehicle. One of them died in the crash. Based on NHTSA's preliminary review, this is the only report of this type of incident happening in a 2007-2015 Tahoe or GMC Yukon. "GM investigated the complaint that is the basis of the petition and found no defect trend," company spokesperson Alan Adler said to The Detroit News, and said the automaker will cooperate with the feds. Still, "a defect petition has been opened to evaluate the issue and make a grant or deny decision," according to NHTSA. Depending on the agency's findings, this could lead to a full investigation and possible recall affecting an estimated 58,000 vehicles. INVESTIGATION Subject : Rollover Side Curtain Air Bags Date Investigation Opened: JUN 11, 2015 Date Investigation Closed: Open NHTSA Action Number: DP15004 Component(s): AIR BAGS All Products Associated with this Investigation Vehicle MakeModelModel Year(s) CHEVROLET TAHOE 2010 CHEVROLET TAHOE HYBRID 2010 Details Manufacturer: General Motors LLC SUMMARY: The Office of Defects Investigation (ODI) has received a petition requesting an investigation of alleged defects that can cause occupant ejections during rollover crashes in certain General Motors vehicles. The petition alleges the defects allow second and third row occupants to be ejected despite the deployment of rollover side curtain air bags. The petition cites a 2011 Texas crash involving a model year 2010 Chevrolet Tahoe, which allegedly resulted in multiple occupants to be ejected. One of the ejected occupants was fatally injured. ODI's preliminary review of its consumer complaint data found no similar reports of occupant ejections on 2007-2015 Chevrolet Tahoe and GMC Yukon vehicles. ODI also reviewed Early Warning Reporting data submitted by General Motors. A defect petition has been opened to evaluate the issue and make a grant or deny decision.

GM marks 500 million vehicles

General Motors is marking a major global milestone, as 500 million vehicles have rolled off its assembly lines since the company's founding in 1908. To mark the occasion, the automaker is continuing to invest in production and offering a one-time discount to some customers. GM North America boss Alan Batey used the festivities to announce the Fairfax Assembly factory in Kansas as one of the sites earmarked for the company's $5.4 billion in upcoming investments. The plant will get $174 million of that money for new equipment and technology to build the 2016 Chevrolet Malibu. Among the upgrades will be a shake-and-rattle booth that will simulate road conditions to find squeaks. To commemorate both the production milestone and the Fairfax plant, Batey and company CEO Mary Barra also gave away a 2016 Malibu to a wounded Iraqi war veteran, and the two execs announced that in the third week in May all GM employees can share a one-time customer appreciation discount with friends to help get them into the automaker's products. Barra also gave a speech to the workers there about some of the other milestone's in the company's history, which you can read below. Innovation on the Line: GM Manufacturing Milestones Many of General Motors' most important innovations have occurred behind the scenes, in its manufacturing facilities. Concepts such as changeover, flexible assembly, automation, computer simulation, machine vision and robotics were developed at GM. Over the decades these innovations have helped enable improvements in vehicle quality, efficiency and competitiveness. 1901: Ransom Olds' famous Curved Dash Oldsmobile, designed with simplicity, reliability and value in mind, was the first American car built in a factory designed specifically for automobiles and in standardized volume production. GM acquired Oldsmobile in 1908. 1908: Cadillac wins the Dewar Trophy, Europe's most prestigious award for precision and excellence in manufacturing, by demonstrating the auto industry's highest standards for precision and interchangeability of parts by disassembling three Cadillacs and mixing the parts randomly before reassembling and driving them before a contingent of judges. 1922: GM hires William Knudsen to lead Chevrolet's turnaround. Knudsen implements flexible mass production, which helps Chevrolet incorporate annual styling changes and take market share from Ford.

Weekly Recap: Lincoln Continental serves up the style, Cadillac CT6 delivers the substance in New York

Lincoln and Cadillac grabbed the spotlight this week at the New York Auto Show in a dramatic fashion that evoked the brands' glory days. America's two luxury carmakers went toe-to-toe with their glittering reveals and plans for ambitious expansion. Both were selling their technology, style and the promise of a better future. Cadillac vs. Lincoln. At the Javits Center, 2015 seemed a lot like 1956. Neither company was interested in drawing comparisons with the other, which is fair, and accurate. They're in vastly different places in terms of sales and the pace of their turnarounds, but they hope to reach the same eventual destination at the pinnacle of the luxury-car world. Lincoln used the element of surprise to great effect with the Continental concept. A production version is still at least a year away, and the company was vague on details. Officially, we don't even know if it is front- or rear-wheel drive, though speculation abounds. Who cares? The seats can be adjusted 30 ways! The Continental also showed off a bold chrome grille that will be the new face of Lincoln. The blue bomber also rolled on blinged-out 21-inch polished aluminum wheels, used a 3.0-liter EcoBoost engine and had huge LED head lights with "laser-assisted" high beams. All of this resulted in almost blinding attention. The concept drew rave reviews, stirred controversy with Bentley designers who argued Lincoln ripped them off, and most importantly, pointed a way forward for the newly determined brand that hopes to compete with Mercedes, BMW, Audi, Cadillac and Lexus. View 32 Photos Meanwhile, Cadillac showed the CT6, a finished product that will top its range and is loaded with the best and latest technologies General Motors has at its disposal. With production starting late this year, Cadillac had more specifics at the ready. Engines? Cadillac has a couple V6s and a turbo four for sure. It's working on a hybrid, and has considered a V-Series variant. It's based on a new rear-wheel-drive, aluminum-intensive chassis called Omega, features an advanced collision-mitigation system with automatic braking and has a cabin that's laden with "leathers, exotic woods and carbon fiber." It will be assembled at GM's Detroit-Hamtramck factory and goes on sale next year. At this point, Cadillac is more than willing to talk about every except for the price. The devil was not in the details for Cadillac, as evidenced by the CT6. But it wasn't for Lincoln either.