Auto blog

2018 Hyundai Accent vs subcompact sedans: How it compares on paper

Hyundai first revealed the new 2018 Hyundai Accent a few months ago, but that debut was in Canada for the Canadian-market car. We didn't get our look at the U.S. version until just recently, which is when we also finally got plenty of specifications on the little car. So as we did with the Genesis G70, we've brought you a breakdown of the Accent's specs and some of the segment's best and most popular: the Nissan Versa, Kia Rio, Chevrolet Sonic and Toyota Yaris iA. Before we get to the chart, let's give you a quick reintroduction to the 2018 Accent. The subcompact is completely new this year, and under the hood is again a naturally aspirated 1.6-liter four-cylinder engine. It makes 7 fewer horsepower and 4 fewer pound-feet of torque than the outgoing model with totals of 130 horsepower and 119 pound-feet. This drop in power probably won't be noticeable, though. It's also available with either a manual or automatic transmission, both featuring six speeds. Fuel economy hasn't been announced, but the Rio's numbers below are probably a good indicator as they share powertrains. The one thing that isn't available with an Accent is a hatchback. According to Autoweek, the hatchback was canned with the assumption that hatch buyers would simply purchase an example of the upcoming Kona crossover. But if you want a traditional subcompact hatch from South Korea, Kia is happy to oblige, as the Rio is still available as a hatchback. Learning that the Kona may have killed the Accent hatch causes us to wonder if Kia brought the Rio hatch to the U.S. because it wasn't planning on offering the Stonic. Related Video: News Source: Hyundai, AutoweekImage Credit: Hyundai Chevrolet Hyundai Kia Nissan Toyota Sedan nissan versa hyundai accent kia rio toyota yaris ia

Experimental mid-engine XP-819 Corvette going up for auction

It seems to be commonplace that when a new Corvette is in development, rumors swirl about a possible mid-engine layout. As is the case of Chevy's most recent C7 Corvette, these rumors never pan out.
In any case, the idea for a 'Vette with an engine mounted behind the driver can probably all be traced back to a single car, the 1964 XP-819 prototype. Built as an "engineering exercise" back in 1964, the prototype was designed with a rear-mounted engine. History tells us that the idea of a rear-engine Corvette fizzled, and the XP-819 was eventually cut up into pieces and stored at a shop in Daytona Beach, FL.
After sitting for untold years, a restoration project started on the car, and while it isn't yet fully completed, the current owner of the car, Mid America Motorworks, will have the car on display at the 2013 Amelia Island Concours d'Elegance as a "driveable chassis" with hopes of having a fully completed car ready to bring to next year's show.

Next Chevy Silverado could get this built-in tailgate step

General Motors just received patent approval for a tailgate step in a pickup bed. And given the timing, don't be surprised if you see this on the upcoming 2019 Silverado pickup (not the mention its GMC Sierra twin), expected to arrive in late 2018. According to the patent, granted in December of last year, the whole mechanism is housed in the tailgate assemble. The magic happens when a portion of the top half of the tailgate swings down and a step folds out. There's also a handle that locks into position to help climb up into the bed. As trucks get bigger and taller over the years, it gets harder and harder to access the cargo bed. Ford's solution with the 2009 F-150 was a step that slides out from the end of the tailgate. Back then, Chevy made an ill-advised ad highlighting the feature for Ford. And while Howie Long mocked the F-150's "man step" Ford saw almost a third of its trucks with the option in the first year. The GM design seems to improve on Ford's idea as it appears to be wider and has a back to the lower step. That is, you don't have to worry about stepping through the ladder-rung design as on the F-150. Ford's tailgate step later spread to the F Super Duty, and other cargo access assists have proliferated through the truck world. On the most recent redesign, the Chevrolet Silverado took a trick from the Avalanche and added cutouts to the corners of the rear bumper that act as a foothold. Ford also offers a deployable side step, Chevrolet has running boards that scoot rearward with a kick of the boot, and Ram offers fixed wheel-to-wheel side rails. Nissan is in on the game too, with an optional folding step that tucks under the rear bumper. We don't expect Chevrolet to comment on when or if we'll see this feature in the showrooms. But given that engineers are already hard at work on the next Silverado and the timing of this patent lines right up with the new truck's development cycle, we'll be disappointed if this patent stays in the file cabinet. Related Video: