2007 Chevrolet Silverado 1500 Ltz Crew 4x4 Comparable Submodel Gmc Sierra 2500 on 2040-cars

Auto blog

Recharge Wrap-up: Detroit Electric teaser video, Nissan Leaf is Good Housekeeping "Tried and Tested"

Detroit Electric has a new teaser video and has updated its brand in preparation of the introduction of the SP:01. The refreshed logo uses a blue and white color palette, and the company has also given its website a new look. The teaser video, which gives a sneak peek at the exterior of the SP:01, shows the car taking form in the midst of an electrical storm. Watch the video or learn more in the press release below. Abengoa is celebrating the grand opening of a commercial scale cellulosic ethanol plant in Hugoton, KS. When running at full scale, the refinery will produce up to 25 million gallons of ethanol a year. The plant will also generate enough electricity to power itself and put some back into the grid. Energy Secretary Ernest Moniz was on hand for the dedication, saying, "Every gallon of cellulosic ethanol produced and used to fuel our vehicles reduces the impact of harmful greenhouse gas emissions by greater than 60 percent as compared to conventional gasoline." Learn more at Energy.gov. Good Housekeeping has named the Nissan Leaf one of its "Tried and Tested" vehicles. The magazine called the Leaf SL its top "Roomy Electric" vehicle in its November issue. The magazine's research institute evaluated the EV based on track and road driving, ergonomics and convenience features. Good Housekeeping made note of the car's "impressive" range, but according to Nissan's Fred Diaz, "the real beauty of the Nissan Leaf is that it's roomy and, best of all, fun to drive." Read more in the press release below. Quasar Energy Group produces compressed natural gas from sewage and garbage. It uses things like grains leftover from brewing Budweiser, food waste from a baseball stadium and sewage sludge to produce the gas through anaerobic digestion. The compressed gas can then be used to power cars like Chevrolet's Bi-fuel Impala, which goes on sale later this year. Chevrolet likens the situation to the Delorean time machine in the Back To The Future movie series, which uses garbage to fuel its fusion generator. Watch the video and read the press release below to learn more. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Our favorite mid-engine Corvette theories and rumors

The mid-engine Corvette! We just saw blurry photos through the foliage, and are hearts are all aflutter because it means that this car is real. And it's the most " never before" Corvette since 1984. Which leads us to all kinds of wacky theories and speculation. Everybody knows something or heard from a guy. None of those guys (or gals) from GM are talking to Autoblog, to be clear. But that won't stop us from stirring the pot. Let's go over a few point-by-point. The pushrod engine will be replaced by an overhead-cam V8 Car and Driver has repeatedly reported that an overhead-cam engine will come after the mid-engine Corvette's debut with an old-school pushrod. We've heard the same thing firsthand, albeit from a source with no connection to the development of the Corvette or powertrain. "At some point two valves can't pass future emissions regulations," said the guy we know. While the pushrod engine is compact, the design makes it difficult - if not impossible - for sophisticated variable valve timing (and lift) systems that control combustion with more precision. Hasty conclusion: The pushrod engine has a finite life in front of it. This one's a lock, it's a just a matter of when. Bowling Green's new paint shop is really the mid-engine assembly line Credit to Reddit for this one. Like we said, everybody knows a guy. But let's look deeper. The new paint facility costs $439 million dollars and adds 450,000 square feet, almost half the size of the existing plant. Plus GM announced another $290 million in upgrades at Bowling Green Assembly. That sure sounds like a lot of money, but you can actually spend that much on a paint booth. Porsche spent 500 million Euros (about $561 million dollars) to add the Macan assembly to its Leipzig, Germany plant in 2014. Chrysler shelled out $850 million for a paint shop in Sterling Heights, Michigan. GM spent $600 million for a new paint shop at the Fairfax (Kansas City) plant. Honda, on the other hand, is working on a thrifty $210 million project in Marysville, Ohio that includes a 300,000 square foot expansion, and the low-volume Acura NSX facility only cost $70 million. Hasty conclusion: The square footage and cost could easily mean a new assembly line instead of (or in addition to) a paint line. And if the NSX plant was really that cheap, GM could have hidden a similar sum in its existing announcements.

Watch the National Corvette Museum sinkhole being filled in by R/C cars

Okay, so not exactly cars, but Bobcats - but still quite cool. You might remember that the National Corvette Museum had that little divot that needed to be filled in. Turns out the construction firm of Scott, Murphy & Daniel doing the work is using two remote-controlled Bobcats to fill the sinkhole with "manufactured sand," which in this case is crushed limestone. It appears that the Bobcat company has offered remote operation since at least 2007 via a wireless transmitter that works up to 1,500 feet away. So yes, that means two SMD employees stand on the edge of the pit and flick joystick levers for hours at a time, one in charge of a Bobcat with a roller-compactor attachment, the other in charge of a Bobcat with a bucket. And that, to us, is a pretty good way to earn the daily bread. Check out the video above for the latest sinkhole update. News Source: National Corvette Museum via YouTube Auto News Weird Car News Chevrolet GM Videos rc car remote control National Corvette Museum bobcat ncm