on 2040-cars

Auto blog

2020 Chevy Silverado HD vs. 2019 Ram, Ford heavy duty trucks: How they compare on paper

Last year was all about the latest in light-duty full-size pickup trucks, so this year, Ram, Ford and Chevy are launching the heavy-duty variants. The first out of the gate is the redesigned 2019 Ram 2500 and 3500 HD, and Ram dropped all the pertinent specs with the reveal. Chevy followed with the new Silverado HD in Chicago, and Ford revealed updates to the Super Duty at the same show. Ford hasn't released details on output, payload capacity, towing capacity or pricing for the updated Super Duty. As such, we'll be comparing the current Super Duty with the all-new Silverado HD and Ram HD. Both Chevy and Ram have revealed full specs for each of their respective trucks, leaving out only pricing, which we've estimated based on the outgoing models. You can see the raw details in the chart below, followed by extra information and analysis. Some things to keep in mind: These specifications cover all versions of the Ram HD, Silverado HD and Super Duty, such as 2500 and 3500 models, and all the way up to F-450. Specifications can vary widely based on engine, drivetrain, cab and bed configurations, so be sure to take a close look at the specific model you're interested in when you get particularly serious about buying. And of course, be sure to check out our car comparison tool if you'd like to look at other trucks on the market. Engines and drivetrains All three of these trucks offer gasoline and diesel engines, but only the Ram has two versions of the diesel. Starting with gas engines, Ram's 6.4-liter V8 has the power advantage with 25 more horsepower than the next-most-potent Super Duty, but the new Silverado HD's 6.6-liter V8 takes the torque crown at 464 pound-feet, nearly 35 more than the other two gas engines. The Ram is also the only one to pair an eight-speed automatic with the gas engine, whereas the Ford and Chevy make do with a six-speed. With diesel engines, horsepower is a weak point for the Ram. The Ram's entry-level turbo 6.7-liter inline-six is the weakest, as the only one with under 900 pound-feet of torque and under 400 horsepower. Even the high-output version only makes 400 horsepower, while the Chevy makes 445 and the Ford 450. But the tables turn with torque, as the Ram makes a best-in-class 1,000 pound-feet followed by the Ford's 935 and the Chevy's 910. Both the Ram and the current Super Duty diesels each get a six-speed automatic, but the new Silverado HD's diesel gets a 10-speed unit.

2014 Chevrolet Malibu gets more torque, more room and inspiration from the Impala

The 2014 Chevrolet Malibu, having stared at the Impala across the showroom floor for a year, gets nips and tucks all over inspired by its larger brother. The 2.5-liter four-cylinder in the base car will get a stop-start system and 23 city miles per gallon, 35 highway, each number representing a one-mpg improvement over the 2013 car. Output is 196 horsepower and 186 pound-feet of torque.
Opt for the 2.0-liter turbo and, while power holds steady at 259 hp, torque goes up by 14 percent to a striking 295 lb-ft (a figure Chevy calls best in the class). The final details include newly programmed transmission shift points and faster shifts, for better engaging and enjoying the added power.
Looks-wise, the grille's been reshaped to be more in line with the new Chevrolet look, a narrower upper grille hovering over a larger lower grille.

GM to build next-gen Chevy Cruze in Mexico

As one of its global products, General Motors builds the Chevy Cruze for local consumption at assembly plants around the world: in Australia, South Korea, Vietnam, Thailand, China, India, Kazakhstan, Russia, Brazil and Ohio. The automaker is expected to trim those locations for the next generation of its compact sedan, but its latest announcement has it adding a new site to the list: Mexico. As part of a $350-million investment, GM's plant at Ramos Arizpe in Coahuila will gear up for production as one of several sites that will be charged with building the next-gen Cruze. The General has yet to announce just which plants those will be, but it has confirmed that the Lordstown, Ohio, site will once again be among them. The plant in St Petersburg, Russia, which has produced the current Cruze, is being shut down, as is the Holden plant in Elizabeth, Australia. The Ramos Arizpe assembly plant currently puts together the Chevy Sonic and Captiva as well as the Cadillac SRX, but has over the course of its 34-year history handled a variety of models for the Chevy, Pontiac, Buick, Cadillac, Saturn, Opel and even Saab brands. The site handles a quarter of GM's production in Mexico, and exports 87 percent of its capacity to other markets. Invertira GM 350 mdd en Ramos Arizpe para fabricar siguiente generacion de Chevrolet Cruze 2015-03-23 - Se consolida GM de Mexico como el sexto productor global de vehiculos para General Motors Company Ramos Arizpe, Coahuila - General Motors de Mexico anuncio este dia que invertira 350 millones de dolares en su Complejo de Manufactura Ramos Arizpe, para fabricar en estas instalaciones la siguiente generacion del modelo Chevrolet Cruze. "Esta inversion, que forma parte de los 5 mil millones de dolares anunciados en diciembre pasado para todo el pais, fortalecera la presencia de GM Ramos Arizpe en la produccion de nuestra compania a nivel mundial y, por supuesto, consolidara a Mexico como el sexto productor de automoviles para GM Company, con el 7% de la produccion global", informo Ernesto M. Hernandez, Presidente y Director General de GM de Mexico. En una reunion de trabajo en la que participaron Ruben Moreira, Gobernador del Estado de Coahuila y Rogelio Garza, Subsecretario de Industria y Comercio del Gobierno Federal, el Presidente de General Motors en el pais aseguro que el Complejo GM Ramos Arizpe se ha consolidado como un iman para las inversiones de la compania a nivel global. Adicionalmente, Ernesto M.