Chevrolet: Corvette Ls3 Z51 3lt on 2040-cars

Auto blog

GM re-recalls 11k SUVs

General Motors is recalling a bunch of previously recalled SUVs because, well, they still aren't quite fixed. The latest repairs are necessary on 10,974 SUVs in North America, including 9,932 in only the US. Affected models include the 2006-2007 Buick Rainier, Chevrolet Trailblazer, and GMC Envoy; plus the 2006 Trailblazer EXT and Envoy XL. While not listed by NHTSA, a statement by GM to Autoblog says the 2006-2007 Saab 9-7X and Isuzu Ascender are also affected. In these SUVs, it's possible that liquid could get into the driver's door master power window switch module and cause a short circuit. This could potentially lead to a fire, and owners are urged to park the vehicles outside until repaired. GM has been trying to fix this issue for years. It started as an investigation into fires, and that led to a recall for about 250,000 vehicles in cold-weather states. A nationwide campaign came in 2013 for 193,000 of them in the US. Last year, the automaker decided to replace the whole module as a repair. However in a recent investigation of these recalls, GM discovered that this latest group of SUVs never received the new part. According to documents submitted to NHTSA (as a PDF), "Some dealers incorrectly used the labor code associated with module replacement when, instead of replacing the module, they only added a protective coating to the module." To fix things this time, the models finally get the correct component. Related Video: GM Statement General Motors is recalling 9,932 older midsize SUVs in the U.S. because they were mistakenly excluded from an earlier recall. Certain 2006 Chevrolet TrailBlazer EXT and GMC Envoy XL, and 2006-2007 TrailBlazer, Envoy, Buick Rainier, Saab 9-7X and Isuzu Ascender vehicles may continue to have a condition in which the printed circuit board inside the driver's door may corrode and short if exposed to certain fluids such as melted snow containing road salt. GM is aware of four fires but no crashes, injuries or fatalities associated with the expanded recall. The total number of vehicles being recalled, including Canada, Mexico and exports is 10.974. Customers are urged to park these vehicles outside until repairs have been made. GM reported this recall to the NHTSA on September 23.

Coronavirus shakes up America's truck market: GM outselling Ford and Ram

FCA, Ford and General Motors joined the rest of the U.S. auto industry in taking heavy volume hits due to coronavirus-related shortages of both cars and customers. The saying goes that a rising tide lifts all boats; it stands to reason, then, that a falling one would have the opposite effect.  However, as we learned Thursday, the automotive market can behave in unpredictable ways. While the F-Series remained the best-selling nameplate in Q1, GM's full-size trucks are now outselling Ford's again for the first time in years, and with this upward thrust from the General, FCA's Ram was unceremoniously booted out of a hard-earned second place.  While late-March sales declines hit just about every major automaker in one way or another, the model-by-model results weren't nearly so uniform. And because the market tends to be a zero-sum game, for every winner, there generally has to be a loser.  In this case, that winner was GM, and its rise had to come at the expense of another automaker, in this case, Ford. F-Series sales dropped 13.1 percent in the first quarter of 2020, while sales of GM's full-sized Silverado and Sierra surged nearly 28% in the same period. FCA's Ram lineup managed a steady-as-she-goes 7% increase. All-in, GM finished the quarter with 197,743 full-size trucks sold to Ford's 186,562. Here's the full breakdown: Ford F-Series: 186,562  Chevrolet Silverado*: 144,734 Ram P/U: 128,805 GMC Sierra: 53,009 *includes 1,036 Medium Duty sales Things are a but murkier in the midsize segment, where the Chevy Colorado slipped 36% to just 21,430 units sold — just a few hundred better than the slow-selling Ford Ranger's Q1 numbers. The GMC Canyon experienced an almost identical slide, finishing the quarter with just 4,483 units sold. For perspective, Jeep sold more than 15,000 Gladiators and Toyota's midsize Tacoma slipped less than 8%, finishing the quarter with nearly 54,000 sales.  We suspect this discrepancy in full- and mid-size truck sales comes from shifting incentives. Ford, GM and FCA would like to keep selling bigger trucks because there's far more profit margin built into their list prices. Even with tens of thousands of dollars in manufacturer money on the hood, big trucks still make money.  Since these automakers report quarterly, we won't get another good look at these numbers until July, but if you thought that 2019 represented the new normal for U.S. auto sales, well, think again.

2016 Camaro gets most revealing tease yet

Chevrolet started its long teaser campaign for the 2016 Camaro by just revealing the exhaust manifold and front frame, but as time has passed the company has slowly unveiled more. In the latest glimpse ahead of the pony car's May 16 debut, we're actually getting to see the model's profile completely undisguised. As suggested by the recent tease of the rear and hood, the 2016 Camaro wears a sharper, more angular design than the current model. This is especially the case when you look at the taut lines making up the rear. Chevy claims that the new shape underwent 350 hours of wind tunnel tests to be able to generate left lift, improve cooling and reduce wind noise in the cabin. A smooth underbody pan is among the aerodynamic tweaks, and it runs from underneath the front grille to the center of the Camaro. Chevy asserts that all of the changes at the front help reduce lift by 30 percent. Related VIdeo: 2016 Camaro is all about the Aero Total aerodynamic lift improved by 30 percent for improved stability 2015-05-11 DETROIT – After 350 hours of wind tunnel testing – often 24 hours a day – the new Camaro will slip more easily through the wind, and drivers of the Camaro SS will experience a marked improvement in reduced aerodynamic lift. These changes illustrate the lengths the aerodynamics team went to for improved performance, stability, cooling and lower wind noise intrusion "The importance of aerodynamics increases exponentially as we increase vehicle performance," said Kirk Bennion, Exterior Design manager. "As engine output increases, we need more engine cooling. As acceleration and top speeds climb, we need to reduce lift for better high-speed stability. However, we cannot make any changes at the expense of increasing drag, which can hurt fuel economy. "To balance these different aerodynamic targets, we tested literally hundreds of changes on the new Camaro, millimeters at a time." For example, the initial design called for the lower grille bars to be set at a 20-degree angle to the horizon. However, after meticulous testing, the team improved engine-cooling airflow by 1 percent by shifting the angle to 13 degrees – a change that achieved the airflow target while maintaining the original grille design. And rather than a traditional front air dam to reduce aerodynamic lift, the team developed a flush belly pan that stretches from the front grille to the center of the vehicle.