No Reserve 2008 Chevrolet Colorado Quad Cab Lt, 1 Corp. Owner on 2040-cars

Auto blog

Chevrolet planning new crossover between Equinox and Traverse

Chevrolet is taking a crowbar to its crossover lineup so it can slide in a new entry between the Equinox (shown) and the Traverse, according to a report in Automotive News. The current Equinox, a tweener compared to its rivals, will get smaller when the next-generation vehicle moves to the Delta platform that underpins the Chevrolet Cruze. The next Traverse will remain full-size, the liberated space between it and the smaller Equinox making room for a fourth offering from the brand. Designed on a short-wheelbase version of the Traverse platform, AN's sources say it will offer three-row seating, and its architecture will also serve the Cadillac SRX successor, the XT5, and the redesigned GMC Acadia. Yes, the Acadia will also come down a notch in size. Once all the rationalizing is complete, the Trax, Equinox, new crossover, and Traverse would give consumers a quicker, easier way to compare size and features with the competition. As it stands, the Ford Edge, Nissan Murano, Honda Pilot, and Toyota Highlander are all larger than the Equinox. The future offering and its two- and three-row seating options would take clear aim at those four vehicles, and the Equinox could focus on the Ford Escape, Honda CR-V, Toyota RAV4, and Jeep Cherokee segment. The new Chevy is predicted to go on sale at the end of next year as a 2018 model. Related Video: Featured Gallery 2015 Chevrolet Equinox View 14 Photos News Source: Automotive News - sub. req. Chevrolet Crossover cadillac srx gmc acadia chevy traverse cadillac xt5

2016 Camaro gets most revealing tease yet

Chevrolet started its long teaser campaign for the 2016 Camaro by just revealing the exhaust manifold and front frame, but as time has passed the company has slowly unveiled more. In the latest glimpse ahead of the pony car's May 16 debut, we're actually getting to see the model's profile completely undisguised. As suggested by the recent tease of the rear and hood, the 2016 Camaro wears a sharper, more angular design than the current model. This is especially the case when you look at the taut lines making up the rear. Chevy claims that the new shape underwent 350 hours of wind tunnel tests to be able to generate left lift, improve cooling and reduce wind noise in the cabin. A smooth underbody pan is among the aerodynamic tweaks, and it runs from underneath the front grille to the center of the Camaro. Chevy asserts that all of the changes at the front help reduce lift by 30 percent. Related VIdeo: 2016 Camaro is all about the Aero Total aerodynamic lift improved by 30 percent for improved stability 2015-05-11 DETROIT – After 350 hours of wind tunnel testing – often 24 hours a day – the new Camaro will slip more easily through the wind, and drivers of the Camaro SS will experience a marked improvement in reduced aerodynamic lift. These changes illustrate the lengths the aerodynamics team went to for improved performance, stability, cooling and lower wind noise intrusion "The importance of aerodynamics increases exponentially as we increase vehicle performance," said Kirk Bennion, Exterior Design manager. "As engine output increases, we need more engine cooling. As acceleration and top speeds climb, we need to reduce lift for better high-speed stability. However, we cannot make any changes at the expense of increasing drag, which can hurt fuel economy. "To balance these different aerodynamic targets, we tested literally hundreds of changes on the new Camaro, millimeters at a time." For example, the initial design called for the lower grille bars to be set at a 20-degree angle to the horizon. However, after meticulous testing, the team improved engine-cooling airflow by 1 percent by shifting the angle to 13 degrees – a change that achieved the airflow target while maintaining the original grille design. And rather than a traditional front air dam to reduce aerodynamic lift, the team developed a flush belly pan that stretches from the front grille to the center of the vehicle.

GM Canada recalls 159,240 GMC and Chevy trucks for faulty defroster circuit

General Motors is recalling more than 159,000 2014-2019 Chevrolet Silverado and GMC Sierra pickup trucks in Canada due to a potential fire risk. GM says the rear defroster circuit could overheat on trucks optioned with the power-sliding rear window. Thus far, there is no word on the recall's relation to U.S. vehicles. The recall, found by Automotive News, was posted to Transport Canada on June 28, 2019 with manufacturer recall No. N192220470. Included in the 159,240 vehicles are the 2014-2018 Silverado 1500, the 2015-2019 Silverado HD, the 2014-2018 Silverado LD, the 2014-2018 Sierra 1500, the 2015-2019 Sierra HD, and the 2014-2018 Sierra LD. The notice says the rear defroster circuit, specifically on trucks with the power-sliding rear window, could overheat. Because of its placement, this excess heat could cause melting, smoking, or possibly fire, in the worst case scenario. As of now, there is no official word when GM will initiate the recall and there is no official fix detailed just yet. GM suggests that owners, who will be notified by mail if their vehicles are affected, take their trucks to a dealer to remove the rear window defroster fuse as a stop-gap.  Automotive News contacted GM to find out if the problem is also found in trucks sold in the United States, but no definitive statement was made, as the investigation is reportedly ongoing. We will update this space if American vehicles are found to be included in the problem.