1967 Chevelle Malibu Convertible Solid With Many Nos Parts V-8 Car on 2040-cars
Mays Landing, New Jersey, United States
Body Type:Convertible
Vehicle Title:Clear
Engine:V-8
Fuel Type:Gasoline
For Sale By:Private Seller
Number of Cylinders: 8
Make: Chevrolet
Model: Chevelle
Trim: Maibu
Drive Type: rear wheel
Mileage: 85,000
Disability Equipped: No
Exterior Color: Marina Blue
Number of Doors: 2
Interior Color: bright blue
Warranty: Vehicle does NOT have an existing warranty
I have owned this 1967 Chevelle Malibu Convertible since 9/3/08, I purchased it from a gentleman here on E-Bay that planned to restore it for his wife but never materialized as it did not for me either. However the car has been in dry storage for over 25 years, by the previous owner & myself. He had a body shop & purchased two new GM fenders many years ago before they were discontinued & kept them with the car in dry storage ever since.
Unfortunately I have to sell two of my long time projects since I can not find the time to complete them. Check out my 1972 Chevy Short bed with a #s matching Big Block, also here on E-Bay.
The car is very solid & does not have the most common rust that these cars have on the floor pans & frame. However it does need a full trunk floor & lower quarter skins. The rockers & inner wheel housings are solid.
I do not have a drive train for the car, but is coded for a V-8
Here is a list of some items that I have that go with the car.
Sorry, I HAVE NO ENGINE OR TRANSMISSION FOR THIS CAR
* New right & left GM NOS fenders
* Used (rust free) factory GM SS hood
* Right & left rust free doors
* New (reproduction) right & left quarter panel skins (best quality on market)
* New one piece trunk floor pan (best quality on market)
* Solid, original trunk lid
* New right & left trunk drop off panels
* Used air conditioning dash board (extra)
* New white convertible top
* New white sun visors
* Used 1967 bucket seats with brackets
* Used rear convertible bench seat
* Used factory gauge package
* Used convertible top brackets & linkage
* (4) 15X7 Rally wheels
* New Tail light bezel chrome
* Used tail light bezel chrome
* (4) used bumpers
* (2) used factory grilles
* Rust free filler panel
* Rust free cowl panel
* Right & left inner fenders (rust free)
* Power steering
* Completely rebuilt front end
* Completely Solid, rust free frame
* Lots of misc. used chrome & stainless
* New SS hood louvers
* 10 bolt, 308 ratio posi rear (currently in car)
* Convertible bracket covers with old boot (rear seat)
* Factory clutch pedal/brake set up
* Used, factory drive shaft
* Clear PA title
* Factory, unaltered trim tag & VIN tag F-2 paint code, & 136 NON SS (original rivets in both)
* Many boxes of misc. new & used parts, everything goes!
May be able to assist successful bidder/buyer with delivery for a fee since I do own a trailer. Depending where your location is.
Please email your questions prior to bidding.
Additional Photos are available upon request.
Please check out my other auctions.
I also have up for auction a 1972 Chevrolet Short Bed with a matching #s big block 400 & many other rare options.
Serious buyers only please!!!!
Chevrolet Chevelle for Sale
1967 chevy chevelle(US $28,000.00)
1967 chevelle malibu frame off rotisserie restoration 350ci dual carbs 4-speed
1966 chevelle ss marina blue w black interior 4-speed frame off rotisserie resto(US $38,900.00)
350 v8, 700r4 transmission, a/c, power top, show wheels, must see !!!(US $34,900.00)
1968 chevrolet chevelle 2 door hardtop
Chevelle nomad hotrod wagon ss buckets 4spd runs great clean no rust no reserve
Auto Services in New Jersey
Williams Custom Tops-Interiors ★★★★★
Volkswagon of Langhorne ★★★★★
Vip Honda Honda Automobiles ★★★★★
Tri State Auto Glass ★★★★★
Solveri Collision Center ★★★★★
Scotts Auto Service ★★★★★
Auto blog
Why an independent rear suspension for GM's new, full-sized SUVs wasn't easy
Mon, Dec 23 2019A Motor Trend report last month laid out how Cadillac's 4.2-lier twin-turbo Blackwing V8 could be an orphan due to cost concerns in the GM empire. Last-minute chassis changes to Cadillac's new sedans and XT6 crossover led to engine bays that couldn't fit the Blackwing. On the SUV side, according to the report, the new independent rear suspension for big people haulers cost so much to implement that GM ruled out reworking the Escalade to accept the Blackwing. At least one commenter rightly asked how could a suspension swallow that much money. A new piece in Motor Trend has the answer. The excellent Alissa Priddle spoke to Tim Herrick, GM's executive chief engineer for full-size trucks, about why the clean-sheet IRS cost "multimillions of dollars." First, GM would need to build a new body shop at the Arlington, Texas plant that assembles the automaker's big SUVs to stamp the numerous wholly new parts and panels accommodating an IRS. Then GM would need to design and pay for a new assembly process. On top of those up-front costs, there was the incremental cost of the four-link IRS components being more expensive than those in the trucks' former leaf-sprung solid axles. Herrick endured so many rejections for so long that he remembers the date and time when he got approval for the new unit. He said it came down to a meeting where he told a higher-up, "I'll make you a deal: If we get to the reveal, or if we launch this and you think this was a dumb idea, I'll hand you my badge and let you walk me out." Head to Motor Trend to read the full story. Based on Herrick being on stage to help present the new SUVs to the press, and on our First Ride in the new Chevrolet Tahoe and Suburban at GM's Milford Proving Grounds, it appears this will have a happy ending for all involved. Furthermore, since Herrick worked on the T1 platform that supports the big SUVs as well as the light- and heavy-duty pickups, he understood the demands on the commercial side, too. That could be why when Roadshow asked Tim Asoklis, chief engineer of the Tahoe and Suburban, if the new IRS could endure life in the Chevrolet Silverado and GMC Sierra, Asoklis answered, "Oh, absolutely." Related Video:
Toyota tops Kelley Blue Book's Resale Value Awards
Tue, 27 Nov 2012Kelley Blue Book announced its annual Best Resale Value Award winners, and we weren't too surprised to see the list dominated by Japanese automakers - mainly Toyota and Honda. KBB hands out the awards based on the projected residual value of mostly all 2013 model year vehicles, and Toyota skated home with a number of awards including 10 of the 22 overall categories and having five of its products in the top 10 for models with best resale value. KBB's Best Resale Value Awards were announced in the same week as the ALG Residual Value Awards, and there were many similarities between both lists, especially when it came to Toyota.
To come up with its winners, KBB measures depreciation over the first five years of ownership, and looks for the cars it expects to hold its value the best after this time; on average, the report says the 2013 model year vehicles will lose 61.8 percent of its value in five years. Of the 22 categories, 15 slots were filled by Toyota, Honda and Nissan products, while the Camaro and Porsche (Cayenne and Panamera) each took home a pair of awards. If Toyota has anything to be upset about in this list of cars, it's that categories for Hybrid/Alternative Energy Car and Electric Vehicle went to the Ford Fusion and Chevrolet Volt, respectively.
The overall top 10 models for the best resale value in 2013 are, in alphabetical order:
Corvette Z06 and Viper TA square off at the strip
Wed, Jan 21 2015There are many long-standing grudge matches among automobiles: 911 vs GT-R, Mustang vs Camaro, Ferrari vs Lamborghini... but as far as high-end American metal goes, it doesn't get much more legendary than Viper vs 'Vette. So after Chevy released the new Corvette Z06, we knew it was only a matter of time before it would have to square off against the Viper TA. And what better place to pit these two parallel pillars of American performance than on the drag strip? Fortunately that's just what we have here. In one corner, the 2014 Dodge Viper TA, with its 8.4-liter V10 pumping out 640 horsepower and 600 pound-feet of torque. In the other, the 2015 Chevrolet Corvette Z06, the supercharger on its 6.2-liter V8 more than making up for the discrepancy in displacement and cylinder count to produce 650 hp and just as much torque. But numbers don't tell the whole story, so watch the video clip to see which reaches the end of the quarter-mile first. News Source: To the Floor via YouTubeTip: James Chevrolet Dodge Videos drag race chevy corvette z06 quarter mile drag strip srt viper ta