1966 Chevrolet Chevelle "ss" Big Block 468 Ci No Reserve Watch Video on 2040-cars
Rochester, New York, United States
Body Type:Coupe
Engine:454 bored to a 468 CI
Vehicle Title:Clear
Fuel Type:Gasoline
For Sale By:Private Seller
Interior Color: Black
Make: Chevrolet
Number of Cylinders: 8
Model: Chevelle
Trim: Malibu
Drive Type: auto
Mileage: 980
Exterior Color: Red
Warranty: Vehicle does NOT have an existing warranty
Hello and thanks for looking at my auction.
For your consideration is this beautiful 66 chevelle SS tribute. I am letting this baby go because of lack of storage space and I regret it.
This is a NO RESERVE auction so the highest bidder will take this baby home. My loss is your gain.
This chevelle spent majority of her life in Florida and this is the first time it was registered in N.Y. by me. I still have a copy of the Florida title. She looks awesome with couple of very small paint chips from normal use.
She comes with a professionally built engine which was a 454 and has been bored out to a 468 CI block. The speedometer was set to zero when the engine work was done so what ever the speedometer says is whats on the engine for mileage. The block has solid cam and all high performance parts, no expense was spared.
She also has a turbo 400 tranny, power steering, front disk brakes, tilt wheel steering, and a 12 bolt rear end with 3:55 gears.
The car is very solid underneath and frame with no rust.
The car drives and runs excellent, I can chirp the tires in second gear.
All the gauges work, directional, wiper, the clock on the console all works
You can see the car's video by clicking this link http://youtu.be/E2B6PeNtlKw
On Aug-19-13 at 16:59:25 PDT, seller added the following information:
Forgot to mention its pushing out around 475 to 500 HP with a 2800 stall convertor. If you want a fast car which roarrsss going down the street , then this is it. Just took it to a cruise night and everyone flocked around her appreciating it.
Chevrolet Chevelle for Sale
Auto Services in New York
Westchester Toyota ★★★★★
Vision Dodge Chrysler Jeep ★★★★★
Village Automotive Center ★★★★★
TNT Automotive ★★★★★
Sterling Autobody Centers ★★★★★
Sencore Enterprises ★★★★★
Auto blog
GM's redesigned full-size 2021 SUVs face delay over coronavirus
Tue, Mar 31 2020As General Motors works to conserve cash for the coronavirus pandemic, the automaker reportedly told suppliers that it is postponing development of several future vehicles. The situation may cause GM to delay the launch of the 2021 Cadillac Escalade, GMC Yukon, Chevrolet Tahoe and Chevrolet Suburban SUVs, which had been planned to roll out in April. The original launch plan for the redesigned full-size SUVs, which are some of the most profitable vehicles produced by GM, had called for production of the current models to end at its plant in Arlington, Texas, this week. After a retooling process, the redesigned SUVs were slated to begin production late in the month of April. In an email to suppliers viewed by Reuters and confirmed as authentic by GM, the automaker also said it was suspending development work on six future vehicle programs, including updates of the Chevrolet Equinox, GMC Terrain, Cadillac XT4, Bolt EV, Chevrolet Silverado and GMC Sierra. GM said preproduction work on those programs would be pushed back to calendar year 2021, with most of the updated vehicles scheduled to be launched as 2022 models. According to the Detroit News, work has also been paused on the Chevy Camaro and a future version of the Corvette that has yet to be unveiled and wasn't planned for production during the 2020 calendar year. Last week, the automaker told employees and suppliers it was delaying work on some future vehicles while pushing ahead with near-term models such as its redesigned full-size SUVs and the GMC Hummer EV, Cadillac Lyriq, Chevrolet Bolt EUV and Cruise Origin, as well as its new Ultium battery system. A GM spokesman who spoke with Reuters reiterated on Monday what the automaker had said last week — that the situation with its U.S. plants was "fluid" and that the automaker would "continue to evaluate" whether and when to reopen those plants on a week-by-week basis, with "employee safety" guiding that decision. GM said previously that it was closing most of its U.S. plants indefinitely. In its Monday email, GM asked suppliers to stop work on all pre-production tooling and pre-production parts manufacturing, but also not to dispose of any tooling or materials. GM told Reuters it had solicited volunteers from its workforce to finish the build-out of the current SUVs on a single shift in Arlington.
Chevy recalls 73k Cobalts for side airbag non-deployment
Mon, Aug 24 2015Chevrolet is recalling 73,424 examples of the 2010 Cobalt in the US and Canada because the driver's side curtain airbag might not deploy in a crash. These vehicles carry build dates between January 4 and June 23, 2010, and, specifically, 59,474 of them are in the US. "GM is aware of one crash with one injury that may be related to this condition," the company said in a statement. The problem occurs because of improper routing of the side-impact sensor wiring harness in the driver's door, and there can be a short circuit causing the curtain airbag not to deploy. The campaign to fix the issue will begin on August 26. Dealers will inspect the vehicles and will repair the issue on any affected examples. Related Video: GM Statement: General Motors is recalling 59,474 2010 Chevrolet Cobalt sedans in the U.S. because some of them may have been built with improper side impact sensor wire routing in the left front door. Dealers will inspect all suspect vehicles and any found with the condition will be repaired free of charge to the customer. GM is aware of one crash with one injury that may be related to this condition. Including vehicles sold in Canada, the total recall population is 73,424. RECALL Subject : Improperly Routed Side Impact Wire Harness Report Receipt Date: AUG 10, 2015 NHTSA Campaign Number: 15V500000 Component(s): AIR BAGS Potential Number of Units Affected: 59,474 All Products Associated with this Recall Vehicle Make Model Model Year(s) CHEVROLET COBALT 2010 Details Manufacturer: General Motors LLC SUMMARY: General Motors LLC (GM) is recalling certain model year 2010 Chevrolet Cobalt vehicles manufactured January 4, 2010, to June 23, 2010. The affected vehicles may be equipped with an improperly routed Side-Impact Sensor (SIS) wiring harness in the driver side front door. The misrouted wiring harness could cause an electrical short that disables the driver side curtain air bag. CONSEQUENCE: A disabled driver side roof-rail air bag will not deploy in the event of a crash necessitating deployment of that air bag, increasing the risk of injury to the driver. REMEDY: GM will notify owners, and dealers will inspect the sensor's wiring in the driver's door and make repairs as necessary, free of charge. The recall is expected to begin August 26, 2015. Owners may contact Chevrolet customer service at 1-800-222-1020. GM's number for this recall is 15075.
GM's Reuss predicts 2016 Chevy Camaro will outperform Ford Mustang in every way
Tue, Apr 7 2015We aren't going to be seeing the next-generation Chevrolet Camaro until next month. But even though we know when we're going to see the new muscle car, it's totally unclear whether Chevy will dole out technical details. That means we can't answer the latest version of the age-old question: Camaro or Ford Mustang? Not surprisingly, General Motors North America President Mark Reuss has already stated his position, saying he was "very confident" that the sixth-generation Camaro will be faster, more agile and more efficient than the Ford. Reuss made his comments after saying he drove the new Camaro back-to-back with the Mustang the week prior. Reuss' statement came in a conversation with Fox News about the 2016 Camaro where he elaborated on the car's weight shedding and how it fit into GM's strategy on other new models. "There are some really cool things in the Camaro, that are quite different than the Malibu, [and] CT6," Reuss told Fox. As we reported previously, the Camaro will shed some 200 pounds by switching to aluminum and other lightweight composites for some of its components. With May 16 just over a month away, here's hoping Reuss decides to loose some other details on the next Camaro ahead of its debut. Related Video: