2010 Chevrolet Camaro Ss Coupe 2-door 6.2l Rs on 2040-cars

Auto blog

New recall issued in 2019 Chevy Silverado and GMC Sierra brake software saga

General Motors (GM) has issued a new recall for select 2019 Chevy Silverado 1500 and GMC Sierra 1500 pickup trucks that aims to resolve a faulty fix for a previous recall. According to National Highway Traffic Safety Administration (NHTSA) campaign No. 20V055000, a software update for the Electronic Brake Control Module (EBCM) could cause the electronic brake assist to be disabled.  The NHTSA first launched a recall for 463,995 Silverados, Sierras, and Cadillac CT6es on December 12, 2019 due to a software issue in the electronic brake control module (EBCM) that could disable the electronic stability control (ESC) and anti-lock braking system (ABS). As a response and resolution to that recall, GM began to reprogram the software in affected vehicles. GM later learned that the fix was creating a different problem. The installed software had its own error that was disabling the electronic brake assist. If customers see “Service Brake Assist” or “Service ECS" diagnostic warnings, they should park the vehicle and have it towed to a dealership, GM warns. While GM was going through the process of testing, pinpointing the issue, determining action and working with the NHTSA, safety experts have criticized Chevrolet and GMC for not reacting promptly and appropriately.  According to the recall, 148,055 are now affected, all of which do not meet the standards of Federal Motor Vehicle Safety Standard (FMVSS) number 126, "Electronic Stability Control" and 135, "Light Vehicle Brake Systems." To fix the braking issue, GM will once again reprogram the software. GM began notifying owners of the recall on February 10, 2020. Related Video:

Chevy's 6.6-liter Duramax is pretty much all new

To say there's a heated battle in heavy-duty pickups is an understatement, with Chevrolet, Ford, and Ram constantly trading blows of increased torque, horsepower, and towing capacity. The latest salvo is the revised, more powerful turbo diesel 6.6-liter Duramax V8 in the 2017 Chevy Silverado. It has 910 pound-feet of torque, an increase of 145, putting it nearly level with the Ford Super Duty. Here's a closer look at where those gains come from. How exactly did Chevrolet add all that torque plus 48 horsepower? The automaker essentially took a fine-tooth comb to the entire engine. Chevy says it changed 90 percent of the V8, and the cumulative effect of those small changes adds up to big increases. As you might guess, the turbocharger is updated. The larger unit features electric actuation of the variable nozzle turbine (VNT), and what Chevy calls a double axle cartridge mechanism that separates the VNT moving parts from the housing. That helps with heat performance as well, with a claim that the exhaust side of the turbo can run continuously up to 1,436 degrees Fahrenheit. Helping that cause are six exhaust gaskets made of Inconel - an nickel alloy that contains chromium and iron – and upgraded stainless steel for the exhaust manifold. Despite having the same cast iron cylinder block, albeit with some minor enhancements, the engine has new cylinder heads, pistons, piston pins, connecting rods, and crankshaft, which have all been upgraded to handle 20 percent higher cylinder pressures. Alongside the increase in pressure, Chevrolet also increased the cylinder head's structure with a honeycomb design. The pattern features high-strength aluminum with dual layer water jackets that not only improve strength, but also optimize water flow for better cooling. For 2017, the cylinder head also benefits from integrated plenum that aids the engine in getting more air under heavy loads. The cylinder head isn't the only component to get a minor update, as the pistons have a larger diameter pin for improved oil flow. The same detailed improvements has been bestowed to the humble connecting rods (second in our hearts only to the inanimate carbon rod). The new design has the bolts oriented roughly 45-degrees to the rod instead of parallel. The angle split design, as it's called allows for easier passage through the cylinder.

Corvette Stingray Convertible images mysteriously appear on web, so we add our own

It was inevitable that we'd see the 2014 Chevrolet Corvette Stingray topless at some point, but that didn't make us any less interested when a pair of supposedly leaked official images showed up on theautoinsiderblog.com last week. We posted them on our Facebook page, but held off reporting on them here until we could get a little more information.
Those images, which feature a dark red car on a sterile black studio background, supposedly first appeared on the website of diecast model maker Maisto. A Chevrolet spokesman has been reported saying that they are "not official images released by Chevrolet PR," which isn't a denial they're the real deal, but neither is it a confirmation.
Close examination of the photos suggest they could be official shots of the Corvette Stingray Convertible, and while some have doubted their authenticity due to a lack of vents (which were seen on the C7s that debuted in Detroit last week), it could be that the images are of a base model car without the Z51 package that doesn't require the extra venting and cooling.