Find or Sell Used Cars, Trucks, and SUVs in USA

1971 Chevrolet C10 Longbed Fleetside Pickup on 2040-cars

US $7,700.00
Year:1971 Mileage:74000 Color: Gold /
 Black
Location:

Hendersonville, North Carolina, United States

Hendersonville, North Carolina, United States
Advertising:
Transmission:Manual
Body Type:Pickup Truck
Vehicle Title:Clear
Engine:Inline 6 cylinder
Fuel Type:Gasoline
For Sale By:Private Seller
VIN: CS141B629003 Year: 1971
Make: Chevrolet
Model: C-10
Cab Type (For Trucks Only): Regular Cab
Trim: cedar wood stakes
Drive Type: three on the tree manual transmission
Mileage: 74,000
Disability Equipped: No
Exterior Color: Gold
Number of Doors: 2
Interior Color: Black
Warranty: Vehicle does NOT have an existing warranty
Number of Cylinders: 6
Condition: Used: A vehicle is considered used if it has been registered and issued a title. Used vehicles have had at least one previous owner. The condition of the exterior, interior and engine can vary depending on the vehicle's history. See the seller's listing for full details and description of any imperfections. ... 

Offering my 1971 Chevrolet C10 Longbed Fleetside Pickup. In very good condition and a daily driver. Body in very good condition save for a little rust in the rocker panels each door side, and forward on the truck bed proper. New shocks, tires, new clutch, exhaust, and so so paint job. This is the kind of truck that you can lay 4 X 8 sheets down flat between the wheel wells and close the tail gate. This is also the kind of turck that was built by bolting fender panels on the frame as it came down the line ~ this is not unibody construction. Frame off restorers prefer this type. Fully resotored in this way, these classic trucks can bring as much as $24K and more. ( if it tkes you 7 yrs or so to fully restore, probably $30K by 2020  ! the price goes up for these, even if you do nothing but store it. ) This is all metal, hardly any plastic on the truck. Obviously these trucks were built to last. I dare say few trucks made today with so much plastic, and so complex with electronics and computers, trucks made today could not possibly last for 42 years like these. The inline 6 cylinder engine is one of the most rugged engines every made. VERY simple and inexpensive to maintain.

Chevrolet C-10 for Sale

Auto Services in North Carolina

Whitey`s German Automotive ★★★★★

Automobile Parts & Supplies, Machine Shops
Address: 6042 Asheville Hwy, Horseshoe
Phone: (828) 684-0684

Transmission Center ★★★★★

Automobile Parts & Supplies, Auto Transmission
Address: 1309 Cotton Grove Rd Ste D, Salisbury
Phone: (336) 249-8769

Tow-N-Go LLC ★★★★★

Auto Repair & Service, Automotive Roadside Service, Towing
Address: Proctorville
Phone: (910) 286-3745

Terry Labonte Chevrolet ★★★★★

Auto Repair & Service, New Car Dealers, Automobile Parts & Supplies
Address: 1401 Bridford Pkwy, High-Point
Phone: (888) 440-1432

Sun City Automotive ★★★★★

Auto Repair & Service, Brake Repair, Tire Changing Equipment
Address: 409 Featherson Rd, Wesley-Chapel
Phone: (803) 548-3227

Show & Pro Paint & Body ★★★★★

Auto Repair & Service, Automobile Body Repairing & Painting
Address: 1779 Bingham Dr, Pope-Afb
Phone: (910) 423-2963

Auto blog

GM recalling 15k midsize pickups over leaky brakes

Mon, Jun 8 2015

General Motors has announced a recall in coordination with the National Highway Traffic Safety Administration related to the brakes on the 2015 Chevy Colorado and GMC Canyon. In the 14,838 units in the United States estimated to be affected, the front brake calipers may be leaking fluid. Needless to say, that could make them less effective, which could hinder the vehicle's ability to stop in time to avoid a collision. The affected units were all manufactured between January 6 and December 24, 2014. The fix seems simple and straightforward enough, with dealers being instructed to inspect the front brake calipers, and replace them if necessary. See below for all the details from NHTSA. RECALL Subject : Brake Fluid Leak Report Receipt Date: MAY 12, 2015 NHTSA Campaign Number: 15V278000 Component(s): SERVICE BRAKES, HYDRAULIC Potential Number of Units Affected: 14,838 Manufacturer: General Motors LLC SUMMARY: General Motors LLC (GM) is recalling certain model year 2015 Chevrolet Colorado, and GMC Canyon trucks manufactured January 6, 2014, to December 24, 2014. The affected vehicles may experience the front brake calipers leaking brake fluid. This is due to air pockets, an imperfection in the metal caliper body. CONSEQUENCE: If the vehicle experiences a brake fluid leak it can increase the stopping distance, increasing the risk of a vehicle crash. REMEDY: GM will notify owners, and dealers will inspect and replace the front-brake calipers if necessary, free of charge. The recall is expected to begin July 10, 2015. Owners may contact GM customer service at 1-800-222-1020 (Chevrolet), or 1-800-462-8782 (GMC). GM's number for this recall is 14888. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov. Related Video: Featured Gallery 2015 Chevrolet Colorado: First Drive View 38 Photos News Source: National Highway Traffic Safety AdministrationImage Credit: Copyright 2015 Seyth Miersma / AOL Recalls Chevrolet GMC Truck gmc canyon brakes

Auto sales in March and first quarter down nearly across the board

Wed, Apr 3 2019

Nearly every major automaker reported weak U.S. sales for March and the first quarter of 2019, citing a rough start to the year, but said a robust economy and strong labor market should encourage consumers to buy more vehicles as 2019 rolls on. GM, which no longer releases monthly sales figures, saw first-quarter sales fall 7 percent, with declines across all brands. Sales of Silverado pickup trucks fell nearly 16 percent and the high-margin Chevy Suburban large SUV dropped 25 percent. Ford also no longer releases monthly sales numbers, but is due to release its first-quarter sales figures on Thursday. According to industry data, Ford's sales fell 2 percent in the quarter and 5 percent in March. Ford representatives did not immediately respond to requests for comment. FCA reported a 7 percent fall in U.S. sales in March and a 3 percent drop for the first quarter. All of FCA's brands dropped in March, except for Ram, which saw a 15 percent increase in pickup truck sales. "The industry had a tough first quarter, but with spring finally starting to show its face and continued strong economic indicators ... we are confident that new vehicle sales demand will strengthen going forward," FCA's U.S. head of sales, Reid Bigland, said in a statement. Toyota reported a 3.5 percent fall in U.S. sales in March and 5 percent for the first quarter, hurt by declining demand for its Corolla sedans and Camry vehicles. "While some of our competitors are abandoning sedans, we remain optimistic about the future of the segment," Toyota said in a statement. Nissan posted a 5.3 percent drop in sales in March, and its first-quarter sales were down 11.6 percent. Honda and Hyundai bucked the trend. Honda's U.S. sales rose 4.3 percent in March and 2 percent in the quarter, while Hyundai's were up 1.7 percent and 2.1 percent, respectively. Passenger-car sales suffered throughout the January-March quarter compared with the same period in 2018 as Americans continued to abandon them in favor of larger, more comfortable pickup trucks and SUVs, which are far more profitable for automakers. The battle for market share in the particularly lucrative large-pickup truck market intensified in the quarter, as Fiat Chrysler Automobiles' Ram brand outsold the U.S.' No. 1 automaker General Motors' Chevrolet-brand trucks. The two automakers have both launched redesigned pickup trucks.

Why does the Corvette Stingray have so many vents? Here's why

Sun, 27 Jan 2013

Just looking at the new 2014 Chevrolet Corvette Stingray, it's not hard to see that the car's design was created with aerodynamics at the forefront, but Chevrolet designers point out exactly what went into designing the iconic coupe in a pair of recently released videos. The videos show the Corvette going through early design phases, including clay models and wind tunnel tests, as well as talking to the car's chief engineer, Tadge Juechter.
Both videos help explain various aspects of the C7 Corvette, but it's the aero tuning of the car that is most interesting. This includes extra attention paid to the lower air dam and vented hood to help reduce drag and lift, while the rear quarter inlets are for differential and transmission cooling. Juechter said that some of these aero-tuned elements were inspired from GM's involvement in racing.
If you have about five minutes and you can't get enough information about the new 'Vette, then check out the videos posted below.