1969 Chevrolet K5 Blazer 4x4 on 2040-cars

Auto blog

GM recalls 8,500 Chevrolet Malibu models for rear suspension glitch

According to a letter from General Motors to the National Highway Traffic Safety Administration, flaws in the build process of the 2013 Chevrolet Malibu have led to the recall of 8,519 cars. Units built between December 6, 2011 and January 15, 2013 may have been assembled with rear suspension cradles that had insufficient torque applied to certain bolts. That out-of-spec assembly could lead to issues ranging from slight noises to a loss of vehicle control.
The problem was first noticed in December of last year by a GM test fleet driver and eventually tracked back to the improperly torqued bolts on the suspension cradle assembled through July 2012 by a supplier located not too far from the Malibu's Detroit/Hamtramck Assembly Plant. Since an official NHTSA recall notice has not been issued yet, it isn't clear whether or not Detroit-built Malibus were the only ones affected (the 2013 Malibu is also built at GM's Fairfax Assembly Plant in Kansas City, Kansas). Dealers will fix the problem by inspecting vehicles for proper torque specs, retightening if not within specs and, in some cases, perform a rear-wheel alignment.

Fingers point to dragged-out NHTSA investigation after second death by ARC airbag inflator

Safety advocates have increased criticism of the federal government's National Highway Traffic Safety Administration after an exploding airbag inflator that's been under investigation for more than six years killed a second person.  On Wednesday, NHTSA posted recall documents filed by General Motors that revealed the second death, the driver of a 2015 Chevrolet Traverse SUV with an inflator made by Tennessee company ARC blew apart, spewing shrapnel. No details were given about where and when the death occurred. NHTSA has said that ARC Automotive of Knoxville has manufactured about 8 million inflators used nationwide in vehicles made by General Motors, Fiat Chrysler (now Stellantis), Kia and Hyundai. “NHTSA should have been all over this along time ago,” said Rosemary Shahan, president of California-based Consumers for Auto Reliability and Safety. “There's just no denying that itÂ’s a (safety) defect.” NHTSA, the agency charged with with keeping America's automobiles and roads safe, began investigating ARC inflators in July of 2015 after two people were injured by flying shrapnel. The investigation became more urgent in 2016, when a Canadian woman driving an older Hyundai Elantra was killed by metal airbag fragments. Public records show only a little progress on the probe. In April, the agency posted a memo in saying it was reviewing volumes of information it received from ARC. Safety advocates such as Shahan say that the dragged-out investigation is an example of the deadly consequences that can result from an understaffed and underfunded agency. The second death should not have happened, Shahan said, and vehicles with faulty ARC inflators should have been recalled faster. The agency, Shahan said, is “grossly underfunded," but it still should have sought recalls of the ARC inflators. She said historically NHTSA has taken little action during Republican administrations but has ramped up safety efforts when Democrats control the White House. Messages were left Wednesday by the Associated Press seeking comment from NHTSA and ARC. At this time, relatively few vehicles are effected. The GM recall covers only 550 Chevy Traverse SUVs from the 2013 through 2017 model years, as well as Buick Enclave SUVs from 2008 through 2017. The automaker said in a statement that the faulty front driver's airbag inflators were either installed at the factory or in replacement airbag modules.

Chevy confirms 2016 Camaro will have wheels, brakes

Good news, everyone! Chevrolet has issued yet another round of teaser images and information about the sixth-generation Camaro, set to debut in Detroit on May 16. This time around, Chevy's teaser images confirm that the new car will not only have wheels and tires (Goodyear Eagle F1s, no less), but brakes as well. On top of that, we now know that the new Camaro will be 28-percent stiffer than the outgoing model. "The more rigid body structure allowed the engineers to more precisely calibrate the steering and suspension systems because they didn't have to compensate for chassis flex. The lighter structure also enabled the size and mass of elements such as the wheels, tires and brakes to be scaled accordingly," GM said in a press release, which you can read below. We've already learned that the new coupe will be 200 pounds lighter than its predecessor, has a bunch of unique parts, and according to GM's Mark Reuss, will outperform the Ford Mustang in every way. Now, it's only a matter of time before we see the sixth-gen Camaro, but surely not before Chevy issues even more teasers and information. Related Video: 2016 Camaro is Stronger, Lighter and More Responsive Computer aided engineering contributes to 28 percent greater structural stiffness DETROIT – The engineering team spent 9 million hours of computational time honing the driving experience of the all-new 2016 Chevrolet Camaro before the first prototype turned a wheel. The structural modeling led to the Gen 6 Camaro being 28 percent stiffer than the current model. "The modeling abilities of computer aided engineering are advancing at incredible rates," said Jim Karlavage, Camaro program engineering manager. "Today, we can accurately model opportunities to add torsional strength without adding unnecessary mass. The result is a lighter, stiffer structure that benefits every aspect of the driving experience." The more rigid body structure allowed the engineers to more precisely calibrate the steering and suspension systems because they didn't have to compensate for chassis flex. The lighter structure also enabled the size and mass of elements such as the wheels, tires and brakes to be scaled accordingly. "The structural weight savings are compounded by opportunities to reduce un-sprung weight," said Karlavage.