2014 Chevrolet Silverado 1500 Ltz on 2040-cars

Auto blog

Chevy says not to look at the 2019 Silverado's fuel economy rating

The 2019 Chevy Silverado is hitting dealerships soon, and one of the most notable changes for the new full-size pickup is the addition of a 2.7-liter turbocharged inline-four. The engine replaces the naturally-aspirated 4.3-liter V6 in volume consumer models like the Silverado LT and promises more power, less weight and — most importantly — better fuel economy. The thing is, the gains in efficiency haven't been as dramatic as some might have hoped, especially when stacked up against competitors from Ford and Ram. As Automotive News reports, GM's response is a little murky. First, let's talk numbers. We're pulling all figures from FuelEconomy.gov, the official U.S. government source for fuel ratings. Fuel economy numbers on trucks vary greatly based on a number of factors. Bed and cab configuration play a part, but so does a four-wheel-drive system. You also have to factor in tires, transmissions, rear-axle gearing, hybrid systems and cylinder deactivation. Things like that can make the difference between best- and worst-in-class. The EPA's website doesn't give enough information a lot of the time, so there's really no easy way to compare apples-to-apples. First, take a look at the ratings for the 2019 Silverado. A 2.7-liter model with two-wheel drive is rated 20 city, 23 highway and 21 combined. That's both better and worse than a two-wheel drive 2018 Silverado with the 4.3-liter V6 (18 city, 24 highway and 20 combined). The updated 2019 Silverado with a 4.3-liter V6 has yet to be rated. With less weight and a smaller engine, many hoped Chevy would make bigger gains. It's unusual to see any decrease in a fuel economy metric these days. GM says that it's not done tuning the new 2.7-liter engine, so fuel economy could theoretically increase. Expanding further, a V8-powered 2019 Silverado (17 city, 24 highway and 19 combined) actually gets better highway fuel economy than a turbocharged four-cylinder powered truck in certain configurations, even if the latter has a better overall average. But that's only with two-wheel drive, the 8-speed transmission and cylinder deactivation. A Silverado with the 5.3-liter V8 and a 6-speed automatic is rated at 15 city, 22 highway and 17 combined. The biggest issue with the Silverado 2.7-liter doesn't come from within GM itself but from Ford and Ram. GM cites the Ford F-150 with the 3.3-liter V6 and the Ram 1500 with the 3.6-liter V6 as the closest competitors to its new 2.7-liter inline-four.

GM looks to combat high theft rates on SUVs with added tech

The Cadillac Escalade has been at or near the top of most-stolen and insurance-loss lists for more than seven years, until it dropped to number six earlier this year. In 2011 it was fitted with a host of new security features to address its easy-to-override features and that has brought the number of thefts down, but when eight of the ten most stolen rides are large SUVs from General Motors, no one will argue that something else needs to be done.
Thus, GM has fitted this same theft-deterring tech to the 2015 Suburban, Tahoe and Yukon. The Suburban and Tahoe will get the steering lock that the Escalade and Yukon already get, plus bolted-down third-row seats to deter thefts like this, stronger door lock cylinders and shields, and side-cut keys to inhibit picking.
Additional security measures in a Theft Protection Package can be purchased for $395, consisting of sensors on the greenhouse glass and interior, an incline/tilt sensor and added "key control systems" to make it more difficult for the men in black balaclavas to steal what you bought.

Is the skill of rev matching being lost to computers?

If the ability to drive a vehicle equipped with a manual gearbox is becoming a lost art, then the skill of being able to match revs on downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. The usefulness of rev matching in street driving is limited most of the time – aside from sounding cool and impressing your friends. But out on a race track or the occasional fast, windy road, its benefits are abundantly clear. While in motion, the engine speed and wheel speed of a vehicle with a manual transmission are kept in sync when the clutch is engaged (i.e. when the clutch pedal is not being pressed down). However, when changing gear, that mechanical link is severed briefly, and the synchronization between the motor and wheels is broken. When upshifting during acceleration, this isn't much of an issue, as there's typically not a huge disparity between engine speed and wheel speed as a car accelerates. Rev-matching downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. But when slowing down and downshifting – as you might do when approaching a corner at a high rate of speed – that gap of time caused by the disengagement of the clutch from the engine causes the revs to drop. Without bringing up the revs somehow to help the engine speed match the wheel speed in the gear you're about to use, you'll typically get a sudden jolt when re-engaging the clutch as physics brings everything back into sync. That jolt can be a big problem when you're moving along swiftly, causing instability or even a loss of traction, particularly in rear-wheel-drive cars. So the point of rev matching is to blip the throttle simultaneously as you downshift gears in order to bring the engine speed to a closer match with the wheel speed before you re-engage the clutch in that lower gear, in turn providing a much smoother downshift. When braking is thrown in, you get heel-toe downshifting, which involves some dexterity to use all three pedals at the same time with just two feet – clutch in, slow the car while revving, clutch out. However, even if you're aware of heel-toe technique and the basic elements of how to perform a rev match, perfecting it to the point of making it useful can be difficult.