Chevrolet Ssr 2-door Hard Top Convertible on 2040-cars

Auto blog

May 2016: FCA wins, Ford and GM stumble on weak car volumes

The May 2016 sales numbers are in, and it looks as though FCA is getting some vindication for boldly cancelling two slow-selling car models. Meanwhile, Ford saw overall sales dip and GM's May volume took a big dive versus the same month in 2015. While Marchionne's decision to axe the Chrysler 200 and Dodge Dart has drawn criticism as being short-sighted, it's working for FCA so far. Although the Dart and 200 aren't out of production yet and no capacity has been shifted to crossover or trucks, May's numbers show that the emphasis on Jeep and Ram models makes sense right now. FCA's US sales rose 1 percent last month compared to May 2015, putting the year-to-date total at 955,186 vehicles, an increase of 6 percent compared to the same period last year. Standouts included the Jeep Renegade, Compass, and Patriot, and the Fiat 500X. Ram pickup sales were down 3 percent. And your fun fact is that Alfa Romeo sales were up precisely 10 percent, for a total of 44 4Cs sold versus 40 in the same month last year. At FoMoCo, the Ford brand took a hit to the tune of 6.4 percent from May 2015 to 2016, registering 226,190 sales last month. Lincoln showed improvement on its modest numbers, going from 9,174 to 9,807, a 6.9 percent increase. Overall, Ford was down 5.9 percent for the month to 235,997; despite the slump, year-to-date total Ford sales are up 4.2 percent to 1,112,939. Strong sellers included Escape, Expedition, F-Series, and Transit - big stuff. Most small and/or efficient models (Fiesta, Focus, Fusion, C-Max) saw sales slides. Fusion sales were also down, likely due to effects of model changeover to the freshened 2017 model. Ford has promised four new crossovers and SUVs by 2020 and if things keep trending this way the company will be able to sell them, but things could change in the next four years. GM saw the worst of it for domestic brands. Retail and fleet sales were down for each of the four divisions, with the May 2016 total dropping 18 percent to 240,450 vehicles. GM's year-to-date sales are down 5.0 percent in 2016 to 1,183,705. Both the Sierra and Silverado were down significantly, and the majority of Chevy, Buick, GMC, and Cadillac nameplates saw sales decreases, with both small cars and larger utilities included. Not even big stuff could help GM this month, it seems. We'll have more on the rest of the industry's May sales as those figures trickle in.

Battery Show 2015: Genovation GXE Corvette EV designed for the 'Ring

The Genovation GXE all-electric Corvette has broken cover. At the Battery Show 2015 in Novi, MI, this week, the converted C6 Z06 Corvette that we first heard about back in August was tucked into a booth along the back wall. Don't let the demure location fool you. This is a muscle-y electric vehicle, ready to roar into the limited-run, expensive EV game. The Genovation GXE Corvette can go from 0-60 miles per hour in three seconds and has a top speed of 200 mph. The powertrain was designed and built in the US, and offers over 700 horsepower and over 600 pound-feet or torque. With a near 50/50 weight distribution, this is "a real driver's car," Genovation CEO Andrew Saul told AutoblogGreen. Saul said that the GXE was designed to do two hard laps at Nurburgring thanks to a 44-kWh battery pack uses the same sort of cylindrical 18650 cells that you can find in a Tesla. That translates to about 40-50 miles of fast, on-road driving, Saul said, or 150 miles on the New York City test cycle. That particular test, "simulates low speed urban driving with frequent stops," according to DieselNet. The car also has a 6-kW charger and a six-speed manual transmission and the adjustable regenerative braking levels can be controlled by paddles on the steering wheel. Of course, none of those performance figures have been proven yet because the GXE hasn't had a chance to hit the road. Saul said that it will take another three-to-four weeks to finish the build and then, finally, there will be a few weeks of road testing. This will include a quarter-mile run on a track as well as a trip to Nevada to do a several-mile top speed test. If all of that sounds like something you're interested in, then get ready to open your wallet wide and wait. Saul said that buying one will set you back $330,000 (just $290,000 if you bring your own C6 Z06). Genovation also won't be making all that many. Saul said he expects to put the GXE into limited production of under 200 units, starting off at maybe five or 10 a year. Featured Gallery Battery Show 2015: Genovation GXE All-Electric Corvette View 14 Photos Green Chevrolet AutoblogGreen Exclusive Electric exclusive corvette genovation

Chevy confirms 2016 Camaro will have wheels, brakes

Good news, everyone! Chevrolet has issued yet another round of teaser images and information about the sixth-generation Camaro, set to debut in Detroit on May 16. This time around, Chevy's teaser images confirm that the new car will not only have wheels and tires (Goodyear Eagle F1s, no less), but brakes as well. On top of that, we now know that the new Camaro will be 28-percent stiffer than the outgoing model. "The more rigid body structure allowed the engineers to more precisely calibrate the steering and suspension systems because they didn't have to compensate for chassis flex. The lighter structure also enabled the size and mass of elements such as the wheels, tires and brakes to be scaled accordingly," GM said in a press release, which you can read below. We've already learned that the new coupe will be 200 pounds lighter than its predecessor, has a bunch of unique parts, and according to GM's Mark Reuss, will outperform the Ford Mustang in every way. Now, it's only a matter of time before we see the sixth-gen Camaro, but surely not before Chevy issues even more teasers and information. Related Video: 2016 Camaro is Stronger, Lighter and More Responsive Computer aided engineering contributes to 28 percent greater structural stiffness DETROIT – The engineering team spent 9 million hours of computational time honing the driving experience of the all-new 2016 Chevrolet Camaro before the first prototype turned a wheel. The structural modeling led to the Gen 6 Camaro being 28 percent stiffer than the current model. "The modeling abilities of computer aided engineering are advancing at incredible rates," said Jim Karlavage, Camaro program engineering manager. "Today, we can accurately model opportunities to add torsional strength without adding unnecessary mass. The result is a lighter, stiffer structure that benefits every aspect of the driving experience." The more rigid body structure allowed the engineers to more precisely calibrate the steering and suspension systems because they didn't have to compensate for chassis flex. The lighter structure also enabled the size and mass of elements such as the wheels, tires and brakes to be scaled accordingly. "The structural weight savings are compounded by opportunities to reduce un-sprung weight," said Karlavage.