Find or Sell Used Cars, Trucks, and SUVs in USA

1991 Pro Street Chevrolet S-10 on 2040-cars

US $10,500.00
Year:1991 Mileage:0
Location:

Newark, Illinois, United States

Newark, Illinois, United States
Advertising:

I'm selling my father's 1991 Pro Street S10 truck. We picked up the truck 3 years ago from Mississippi as a roller. The paint has some minor imperfections but is definately show quality. The flames are airbrushed and hand pinstriped in barbed wire. The door handles have been shaved and has a remote popper for driver's side. There is no rust or bondo on the truck....very clean body. The interior is all custom with embroidered flames in the seats and headrests. Has complete Autometer gauges and custom dash cluster.

It originally had a blown sbc and TH350 which the previous owner kept for another project. It now has a fresh 355 engine with only break-in time on it. It has new Edelbrock 500 carbs on a street tunnel ram. It has full MSD ignition, roller rockers, hi-lift cam, headers and is very nicely detailed.  The trans is a rebuilt TH350 with 2800 stall and mild shift kit. The rearend in a 12 bolt posi with 3.73 gears and leaf spring suspension. The car was built for the street and was never raced. The truck runs and drives but will need final tuning before it would be considered streetable.

I'm selling this for my father due to financial reasons. There has been a lot of money and time put into the truck, but unfortunatly funds have run out. If you have any questions about the truck, please feel free to call him @ 331-725-9117 Jim. Thank you and good luck bidding. I do reserve the right to end the auction early due to local sale.

Auto Services in Illinois

Zeigler Chrysler Dodge Jeep ★★★★★

New Car Dealers, Used Car Dealers
Address: 2311 Ogden Ave, Darien
Phone: (630) 241-5500

Walden Automotive ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Tire Dealers
Address: 1508 S Main St Ste A, Holder
Phone: (309) 828-3366

Twin City Upholstery Ltd. ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Automobile Seat Covers, Tops & Upholstery
Address: Heyworth
Phone: (309) 829-3839

Truetech Automotive ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Automobile Accessories
Address: 410 E Northwest Hwy, Elk-Grove-Village
Phone: (847) 299-8783

Towing Recovery Rebuilding Assistance Services ★★★★★

Auto Repair & Service, Automotive Roadside Service, Towing
Address: 1835 High Grove Ln #103, Eola
Phone: (630) 200-2731

Tony`s Auto Body ★★★★★

Automobile Body Repairing & Painting
Address: 157 E Kensington Ave, Burnham
Phone: (773) 928-4670

Auto blog

Our favorite mid-engine Corvette theories and rumors

Tue, Sep 13 2016

The mid-engine Corvette! We just saw blurry photos through the foliage, and are hearts are all aflutter because it means that this car is real. And it's the most " never before" Corvette since 1984. Which leads us to all kinds of wacky theories and speculation. Everybody knows something or heard from a guy. None of those guys (or gals) from GM are talking to Autoblog, to be clear. But that won't stop us from stirring the pot. Let's go over a few point-by-point. The pushrod engine will be replaced by an overhead-cam V8 Car and Driver has repeatedly reported that an overhead-cam engine will come after the mid-engine Corvette's debut with an old-school pushrod. We've heard the same thing firsthand, albeit from a source with no connection to the development of the Corvette or powertrain. "At some point two valves can't pass future emissions regulations," said the guy we know. While the pushrod engine is compact, the design makes it difficult - if not impossible - for sophisticated variable valve timing (and lift) systems that control combustion with more precision. Hasty conclusion: The pushrod engine has a finite life in front of it. This one's a lock, it's a just a matter of when. Bowling Green's new paint shop is really the mid-engine assembly line Credit to Reddit for this one. Like we said, everybody knows a guy. But let's look deeper. The new paint facility costs $439 million dollars and adds 450,000 square feet, almost half the size of the existing plant. Plus GM announced another $290 million in upgrades at Bowling Green Assembly. That sure sounds like a lot of money, but you can actually spend that much on a paint booth. Porsche spent 500 million Euros (about $561 million dollars) to add the Macan assembly to its Leipzig, Germany plant in 2014. Chrysler shelled out $850 million for a paint shop in Sterling Heights, Michigan. GM spent $600 million for a new paint shop at the Fairfax (Kansas City) plant. Honda, on the other hand, is working on a thrifty $210 million project in Marysville, Ohio that includes a 300,000 square foot expansion, and the low-volume Acura NSX facility only cost $70 million. Hasty conclusion: The square footage and cost could easily mean a new assembly line instead of (or in addition to) a paint line. And if the NSX plant was really that cheap, GM could have hidden a similar sum in its existing announcements.

Here are a few of our automotive guilty pleasures

Tue, Jun 23 2020

It goes without saying, but I'll say it anyway. The world is full of cars, and just about as many of them are bad as are good. It's pretty easy to pick which fall into each category after giving them a thorough walkaround and, more important, driving them. But every once in a while, an automobile straddles the line somehow between good and bad — it may be hideously overpriced and therefore a marketplace failure, it may be stupid quick in a straight line but handles like a drunken noodle, or it may have an interior that looks like it was made of a mess of injection-molded Legos. Heck, maybe all three. Yet there's something special about some bad cars that actually makes them likable. The idea for this list came to me while I was browsing classified ads for cars within a few hundred miles of my house. I ran across a few oddballs and shared them with the rest of the team in our online chat room. It turns out several of us have a few automotive guilty pleasures that we're willing to admit to. We'll call a few of 'em out here. Feel free to share some of your own in the comments below. Dodge Neon SRT4 and Caliber SRT4: The Neon was a passably good and plucky little city car when it debuted for the 1995 model year. The Caliber, which replaced the aging Neon and sought to replace its friendly marketing campaign with something more sinister, was panned from the very outset for its cheap interior furnishings, but at least offered some decent utility with its hatchback shape. What the two little front-wheel-drive Dodge models have in common are their rip-roarin' SRT variants, each powered by turbocharged 2.4-liter four-cylinder engines. Known for their propensity to light up their front tires under hard acceleration, the duo were legitimately quick and fun to drive with a fantastic turbo whoosh that called to mind the early days of turbo technology. — Consumer Editor Jeremy Korzeniewski  Chevrolet HHR SS: Chevy's HHR SS came out early in my automotive journalism career, and I have fond memories of the press launch (and having dinner with Bob Lutz) that included plenty of tire-smoking hard launches and demonstrations of the manual transmission's no-lift shift feature. The 260-horsepower turbocharged four-cylinder was and still is a spunky little engine that makes the retro-inspired HHR a fun little hot rod that works quite well as a fun little daily driver.

Recharge Wrap-up: Panasonic, Tesla on Gigafactory deal?

Tue, Jul 29 2014

Bentley has been awarded the Carbon Trust Standard for reductions of carbon, water use and waste production in manufacturing. The Carbon Trust is an organization that helps groups such as businesses and governments reduce carbon emissions, use of energy and resources, and waste output. From 2011 to 2013, Bentley reduced CO2 emissions by 16 percent per car manufactured, curtailed water use by 35.7 percent, and saw significant waste reductions. Darran Messem of Carbon trust says, "Bentley is clearly passionate about continuing to improve its environmental performance, which is reflected by the fact the company has consistently invested in new technology." Read more in the press release below. Chevrolet is giving 12 Volts to MBAs Across America. The organization will use the range-extended electric cars in its efforts to help MBA students learn from and work with small business owners. As part of the MBAs Across America program's first year, four students drove 8,000 miles to provide entrepreneurs with free business counseling. The program has expanded, and this year, teams of MBAs will use the Volts to travel to 25 cities to offer their services. Learn more about the partnership between Chevrolet and MBAs Across America in the press release below. A professor from the University of Michigan has found fuel cycle analysis to be too flawed to be relied upon for measuring CO2 impacts of transportation fuels. Professor John DeCicco of the university's Energy Institute feels that the flaws in calculating the carbon footprint of liquid fuel production and combustion make such lifecycle analysis impractical. He suggests, instead, to focus to carbon capture. Since capturing CO2 directly from a vehicle is probably never going to happen, DiCicco believes the solution is to capture carbon from the atmosphere in sectors outside of transportation. Says DiCicco, "Research should be ramped up on options for increasing the rate at which CO2 is removed from the atmosphere and on programs to manage and utilize carbon fixed in the biosphere, which offers the best CO2 removal mechanism now at hand. Such strategies can complement measures that control the demand for liquid fuels by reducing travel activity, improving vehicle efficiency and shifting to non-carbon fuels." Read more at Green Car Congress. Global transportation energy consumption is expected to increase by 25.4 percent by 2035, according to a report by Navigant Research.