1 Owner Super Low Miles 19000miles 19000miles 19000miles Leather Sunroof Very Cl on 2040-cars

Auto blog

New GM subcompact SUV spied, could be a Chevy or GMC

GM's pair of subcompact crossovers have been trundling along for a while now. The Buick Encore was the first for Americans in the 2013 model year, and the Chevy Trax that was based on the Encore (an encore of the Encore, if you will) arrived for the 2015 model year. Each has undergone a mild update, but these spy photos could indicate their replacements are in the works. Or not. For starters, we can't be sure which GM brand this new SUV is destined for. Though the timing and its flowing lines could indicate Buick, the thick horizontal bars visible in the grille would indicate otherwise. The next Encore being at least related to this is at least a possibility. Making the case for GMC are those thick grille bars, the fact that it extends far below the lights, and may even rise above them, similar to the Acadia. And that rising beltline isn't that different from that of the Acadia. Arguing against the GMC idea is the Encore, which is almost always sold in GMC-Buick combo dealers. Much as the Acadia was made smaller to eliminate confusion and in-house competition with the Enclave, it's hard to see GM opting to resurrect such an issue at the bottom end of the SUV market. That means we're leaning toward this little SUV wearing a Chevy bowtie. The split grille with a large lower section and small upper section is the brand's current design language, as seen on the new Malibus and Cruzes. The shape is vaguely Equinox-like. And like Buick, Chevy also has a subcompact crossover ready for replacement: the Trax. Now, our photographer reports he's seen another subcompact testing that has Blazer design cues, but in this crossover-hungry market, we wouldn't be surprised if two similarly sized but differently styled Chevy crossovers make the grade. It's a strategy that's working pretty well for Jeep. We'll no doubt be seeing more of these disguised test vehicles milling about the country in the coming months, so perhaps we'll eventually get a better idea of what this is before more official information starts trickling out within one or two years. Related Video: Featured Gallery GM Subcompact Crossover spy shots View 10 Photos Image Credit: SpiedBilde Spy Photos Buick Chevrolet GM GMC Crossover SUV buick encore chevy trax

Want a V8 on the cheap? Buy a work truck

In case you didn't notice, V8 cars have gotten pretty expensive. If you want a modern muscle car like the Dodge Challenger R/T, Ford Mustang GT, or Chevy Camaro SS, you'll need between $34,000 and $38,000 for a stripped out example of one. The cheapest of those is the Challenger, and the priciest is the Camaro. These are also the cheapest V8 cars the companies offer. But if you absolutely have to have a V8 for less, there is an option, work trucks. As it turns out, all of the Big Three offer their most basic work trucks with V8s. And because they're so basic, they're pretty affordable, especially when sticking with the standard two-wheel drive. A Ram 1500 Tradesman with a V8 can be had for as little as $29,840, which is a little more than $4,000 less than a Challenger R/T. For a bit more at $30,275, you can have a Chevy Silverado W/T, almost $8,000 less than a Camaro SS. The most expensive is the V8 Ford F-150 starts at a starting price of $30,670, which is a bit over $5,000 less than the Mustang. Of course you'll be in an ultra bare bones vehicle with few comforts, and the price will go up if you add stuff, but we're bargain hunting here, and sacrifices are sometimes necessary. Besides, what you lose in comfort, you gain in loads of cargo space and towing (try to look at the bright side). Also, as a side note, all three trucks are available with optional electronic locking rear differentials. At the discounted price of these trucks, you still get a heaping helping of power. The most potent of the trio is the Ram 1500 Tradesman with 395 horsepower and 410 pound-feet of torque generated by a 5.7-liter V8. Compared with the Challenger R/T, the Ram is up by 20 horsepower and they're tied for torque. The value proposition is even more stark between the two vehicles when looking at the price per horsepower. Each pony in the Ram costs $75.54, while the Challenger charges you $90.91. The Challenger is also more expensive per horsepower than its close competitors. The F-150's 5.0-liter V8 is just barely behind the Ram with 395 horsepower and 400 pound-feet of torque. That's still more power than the Challenger, and it matches the torque of the 2017 Mustang GT. On the down side, it still would be down 20 horsepower on that same 2017 Mustang, and it's behind by 60 horsepower and 20 pound-feet on the new 2018 Mustang GT. The F-150 also just edges out the Mustang in the dollar per horsepower measure.

Why does the Corvette Stingray have so many vents? Here's why

Just looking at the new 2014 Chevrolet Corvette Stingray, it's not hard to see that the car's design was created with aerodynamics at the forefront, but Chevrolet designers point out exactly what went into designing the iconic coupe in a pair of recently released videos. The videos show the Corvette going through early design phases, including clay models and wind tunnel tests, as well as talking to the car's chief engineer, Tadge Juechter.
Both videos help explain various aspects of the C7 Corvette, but it's the aero tuning of the car that is most interesting. This includes extra attention paid to the lower air dam and vented hood to help reduce drag and lift, while the rear quarter inlets are for differential and transmission cooling. Juechter said that some of these aero-tuned elements were inspired from GM's involvement in racing.
If you have about five minutes and you can't get enough information about the new 'Vette, then check out the videos posted below.