2014 Chevrolet Impala 1ls on 2040-cars

Auto blog

Experimental mid-engine XP-819 Corvette going up for auction

It seems to be commonplace that when a new Corvette is in development, rumors swirl about a possible mid-engine layout. As is the case of Chevy's most recent C7 Corvette, these rumors never pan out.
In any case, the idea for a 'Vette with an engine mounted behind the driver can probably all be traced back to a single car, the 1964 XP-819 prototype. Built as an "engineering exercise" back in 1964, the prototype was designed with a rear-mounted engine. History tells us that the idea of a rear-engine Corvette fizzled, and the XP-819 was eventually cut up into pieces and stored at a shop in Daytona Beach, FL.
After sitting for untold years, a restoration project started on the car, and while it isn't yet fully completed, the current owner of the car, Mid America Motorworks, will have the car on display at the 2013 Amelia Island Concours d'Elegance as a "driveable chassis" with hopes of having a fully completed car ready to bring to next year's show.

Fullsize GM SUVs have a problem that's making owners sick

Some fullsize SUV owners are getting sick, thanks to a buffeting and vibration problem in 2015 model year examples of the Chevy Tahoe and Suburban, Cadillac Escalade, and GMC Yukon. According to owners' complaints to the National Highway Traffic Safety Administration, the issue can vary from an annoying vibration inside the cabin to an experience so severe that it leads to dizziness and headaches. General Motors is aware of the complaints, but the fix isn't so simple. According to spokesperson Tom Wilkinson to Autoblog, the company "has been tracking this issue for a while." The problem has a fairly low incidence rate, but when it does occur the issue can be "uncomfortable and annoying for owners." There's no precise cause for the issue, Wilkinson claims, and in some cases, simply balancing the tires or changing the door seals can make it go away. However, not all of the fixes are so simple. AutoGuide dug deep into the problem and discovered a GM preliminary information bulletin that advised dealers to remove the headliner and to check the roof's bonds to the bows that go across the vehicle. However, that document included a note that the solution might not entirely eliminate things. According to AutoGuide, adding Dynamat insulation to the roof sometimes helped the problem. A GM spokesperson also told AutoGuide the company fixed the problem at the end of the 2015 model year, and didn't go into any more detail. This roof issue seems linked to some of the worst droning in these SUVs. According to one complaint from a 2015 Suburban owner to NHTSA: "Roof will not remain attached to the roof bows. This causes the buffeting similar to a window being down when all are up. The results span from annoying to painful." A 2015 Yukon owner claims to have another alleged cause for the problem in a NHTSA complaint from February 2015. This person brought their SUV to the dealer seven times over the course of four weeks for vibrations. The dealer replaced the driveshaft, suspension components, and more, but nothing worked. According to an engineer to the service adviser: "In an effort to prevent roll overs, they designed the frame and body mounts too stiff. There are 40 engineers working on issues, they have no solutions that work across the board." Wilkinson told Autoblog that GM is working with customers on an individual basis to rectify things. Since these are newer vehicles, dealers should also fix the problem under warranty.

1970 Chevy Camaro gets 650-hp crate engine for SEMA

The latest edition of the Chevrolet Performance catalog arrives at the 2015 SEMA Show, and to demonstrate the insane creations that are possible with it, the company has a seriously powerful machine in tow. This custom 1970 Camaro RS boasts the new LT4 crate engine that makes a staggering 650 horsepower and 650 pound-feet of torque. The offering gives hot rod builders the ability to put the Corvette Z06's 6.2-liter supercharged V8 into any project where they can make the mill fit. This Hyper Blue Metallic Camaro should offer neck-snapping performance with its massively powerful engine and a T-56 Super Magnum six-speed manual gearbox. Chevy's show car is about more than just packing copious horsepower into a classic shape, though. The builders also overhaul the suspension with coilovers at the front and rear, in addition to a four-link setup at the back. Behind the 19-inch aluminum wheels, the coupe has Z06-based brakes at both ends. For better visibility, it wears LED headlights and taillights. Plus, the interior gets custom gauges and a six-point roll cage. With pieces like titanium intake valves and forged aluminum pistons, the LT4 crate engine comes ready to offer serious performance, but Chevy also gives builders a few options to fit their application. The mill is available with either wet- or dry-sump lubrication. Depending on the version, there are kits to fit front-end accessories, air conditioning, and power steering, as well. The new Chevy Performance catalog features other high-performance components like Z06-based parts for the standard Stingray and an array of performance upgrades for the 2016 Camaro, including suspension lowering kits, brake upgrades, and more. We look forward to seeing this vast collection of goodies at SEMA this year. Related Video: Classic 1970 Camaro Shows Supercharged LT4 Heart Contemporized muscle car highlights new Corvette Z06-based crate engine LAS VEGAS – Chevrolet Performance is showing off the new LT4 crate engine in the most attractive way possible – under the hood of a classic 1970 Camaro RS. The concept vehicle was introduced today at the SEMA Show, in Las Vegas. As the supercharged 6.2L heart of the Corvette Z06, the LT4 is rated at 650 horsepower and 650 lb-ft of torque, making it the most powerful production-vehicle engine ever from General Motors. The new crate engine – offered in dry-sump and wet-sump versions – allows builders to use the high-tech performance engine in their hot rod projects.