2014 Chevrolet Equinox 2lt on 2040-cars

Auto blog

GM veteran Bryan Nesbitt tapped to head Buick design

General Motors styling veteran Bryan Nesbitt (pictured above) took over a new role on Monday as executive director of global Buick design and global architectures. Andrew Smith, who previously did that job and also coordinated the look for Cadillac, has remained in charge of the pen at Caddy with this shift. Nesbitt rose to prominence when he designed the Chrysler PT Cruiser, according to Automotive News. He joined GM in 2001 and has been there ever since in multiple high-level roles. In 2007, he was appointed vice president of design for North America and was later briefly general manager of Cadillac in 2009-2010. Nesbitt took over as the vice president of GM's international operations design in China in 2011. This shuffle also moves Ken Parkinson, currently styling boss for Chevrolet trucks, to China as design vice president there. In addition, John Cafaro becomes the person in charge of the look for Chevy globally, rather than previously splitting that role between cars and trucks with Parkinson. GM Global Design Leadership Changes – effective June 1, 2015. Bryan Nesbitt, Design Vice President, GM China will repatriate to North America and assume the position of Executive Director, Global Buick and Global Architectures. He will be located in Warren, MI. Bryan will be the design Champion for Buick in the US and China. Ken Parkinson, Executive Director, Global Chevrolet Trucks and Global Architecture will assume the position of Design Vice President, GM China. He will be based in Shanghai, China. Andrew Smith, Executive Director, Global Cadillac and Buick Design will assume the position of Executive Director, Global Cadillac. He will continue to be the design Champion for the Cadillac brand. In addition, he will continue to lead the Global Color & Trim team. He will be based in Warren, Michigan. John Cafaro, Executive Director, Global Chevrolet Cars will assume the position of Executive Director, Global Chevrolet. He will be the design Champion for Chevrolet. In addition, John will lead the exterior components and accessories team. He will continue to be based in Warren, MI. The roles and responsibilities of Helen Emsley, Mark Adams, Carlos Barba, Clay Dean, Michael Simcoe, and Teckla Rhoades remain the same. Related Video: The video meant to be presented here is no longer available. Sorry for the inconvenience.

Why does the Corvette Stingray have so many vents? Here's why

Just looking at the new 2014 Chevrolet Corvette Stingray, it's not hard to see that the car's design was created with aerodynamics at the forefront, but Chevrolet designers point out exactly what went into designing the iconic coupe in a pair of recently released videos. The videos show the Corvette going through early design phases, including clay models and wind tunnel tests, as well as talking to the car's chief engineer, Tadge Juechter.
Both videos help explain various aspects of the C7 Corvette, but it's the aero tuning of the car that is most interesting. This includes extra attention paid to the lower air dam and vented hood to help reduce drag and lift, while the rear quarter inlets are for differential and transmission cooling. Juechter said that some of these aero-tuned elements were inspired from GM's involvement in racing.
If you have about five minutes and you can't get enough information about the new 'Vette, then check out the videos posted below.

2016 Chevrolet Colorado Diesel First Drive [w/video]

The first thing you notice inside the diesel Chevy Colorado is that it's quiet. Almost too quiet. A lot has been done to quell noise and vibration with this new powertrain, and it shows – or rather, doesn't. There's some characteristic diesel clatter at idle, but even then it's distant and practically disappears as you start moving down the road. At full throttle, when the engine is at its noisiest, the sound isn't particularly diesel-like, just a pleasant intake breath. The accompanying smoothness is almost eerie. When we ask where all the noise went, Chevy's engineers, marketing guys, and PR reps all explain that this refinement is what Americans want. We're still not sure. This is a truck, after all, and the diesel pickup customer is different from the guy buying a diesel Cruze for his highway commute. Chevy contends that they're also not the same as the buyer of a Silverado HD. Although this 2.8-liter Duramax four-cylinder has been in service elsewhere around the globe, its first US application is in the Colorado and its GMC Canyon twin. The engine puts out 181 horsepower and 369 pound-feet of torque, and it does so unobtrusively as a result of a lot of modifications for our market. To keep normal diesel sensations out of the cabin, the intake and oil pan both get acoustic treatments. A new, thicker material is used for firewall sound deadening. Redesigned balance shafts have tighter tolerances to increase smoothness. The diesel powertrain is smoother than the Colorado's gasoline V6. One of the more interesting and certainly unexpected vibration-reduction changes is a special torque converter from German supplier LuK equipped with a centrifugal pendulum absorber. This pendulum spreads from the center of the torque converter as engine speed increases and is tuned to absorb the four-cylinder's second-order vibrations, not just those in a narrow frequency band. It does an admirable job, especially considering the engine's biggish, 0.7-liter cylinders, which lead to bigger vibrations. The result is a powertrain that's smoother than GM's (not particularly smooth) corporate V6, which is available in the standard Colorado. It's quieter than a Cruze diesel and even out-softens some gas direct-injection engines on the market. Paradoxically, it may be the most refined of all of the Colorados. No vibration comes through the steering wheel, pedals, floorboards, or even the rearview mirror. But you can tell it's a diesel when you hit the throttle.