2002 C5 Corvette Z06 Rare 2963 Miles on 2040-cars

Auto blog

2021 Chevy Tahoe, GMC Yukon fuel economy and towing capacities go official

Most of the puzzle pieces have fallen into place with GM’s new full-size SUVs, but today we have fuel economy and towing to add to the picture. Numbers for the standard 5.3-liter V8 and upgrade 6.2-liter V8 are out, but GM has held back on the 3.0-liter turbodiesel inline-six for the time being. Those numbers are most likely not ready yet. Minor improvements and decreases are seen throughout the Tahoe/Suburban and Yukon/Yukon XL lineup. Because there are so many variants, weÂ’re going to just lay them out below for you. 5.3-liter V8 2021 Tahoe/Yukon 2WD: 16/20/18 2021 Tahoe/Yukon 4WD: 16/20/18 2021 Suburban/Yukon XL 2WD: 16/20/18 2021 Suburban/Yukon XL 4WD: 15/19/17 6.2-liter V8 2021 Tahoe/Yukon 2WD: 15/20/17 2021 Tahoe/Yukon 4WD: 14/19/16 2021 Suburban/Yukon XL 2WD: 15/20/17 2021 Suburban/Yukon XL 4WD: 14/19/16 As you can see, there isnÂ’t a whole lot of difference between two-wheel drive and four-wheel drive options. You can eke out an extra mpg here and there, but itÂ’s a penalty weÂ’d be happy to live with to have four-wheel traction. The biggest loser in all of this is highway mpg. Chevy has made the trucks bigger and added weight with the independent rear suspension, causing a decrease in fuel economy. For example, a 2020 Tahoe with the 6.2-liter V8 and four-wheel drive is rated at 14/22/17. The 2021 truck drops 3 mpg on the highway and 1 mpg in the combined rating. There are improvements to be found, though. A 2020 Suburban with the 5.3-liter V8 and four-wheel drive is rated 14/21/16. Fuel economy in the city goes up 1 mpg, but you lose 2 mpg on the highway and 1 mpg in the combined rating. ThereÂ’s a bit of give and take here, but at least a slight increase in city mpg has accompanied the greater loss in highway fuel economy. 2021-chevy-tahoe-chicago-01 View 12 Photos As for towing, the Tahoe/Yukon with the 5.3-liter V8 and two-wheel drive has a new 7,900-pound capacity, and the four-wheel drive model is rated at 7,700 pounds. Respectively, those are the best figures youÂ’ll get with the standard towing capacity. Opt for the maximum towing package, and the Tahoe/Yukon capacities go up to 8,400 pounds (two-wheel drive) and 8,200 pounds (four-wheel drive). The numbers all take slight cuts when you go for the 6.2-liter V8. Both the Suburban and Yukon XL offer similar or identical towing figures as their shorter counterparts do.

GM to cut production at 5 plants in North America, kill several models

DETROIT/WASHINGTON — General Motors Co said on Monday it will cut production of slow-selling models and slash its North American workforce in the face of a stagnant market for traditional gas-powered sedans, shifting more investment to electric and autonomous vehicles. The announcement is the biggest restructuring in North America for the U.S. No. 1 carmaker since its bankruptcy a decade ago. GM said it will take pre-tax charges of $3 billion to $3.8 billion to pay for the cutbacks, but expects the actions to improve annual free cash flow by $6 billion by the end of 2020. GM plans to halt production next year at three assembly plants: Lordstown, Ohio, Hamtramck, Michigan, and Oshawa, Ontario. The company also plans to stop building several models now assembled at those plants, including the Chevrolet Cruze, the Cadillac CT6 and the Buick LaCrosse, the sources said. Sources said the Chevrolet Volt, Impala and Cadillac XTS would also be discontinued. Signs of the demise of six passenger-car models have been swirling since July. Plants in Baltimore, Maryland, and Warren, Michigan, that assemble powertrain components have no products assigned to them after 2019 and thus are at risk of closure, the company said. It will also close two factories outside North America, but did not identify those plants. The AP reported that 14,700 jobs would be affected. Some 8,100 of those would be white-collar jobs reduced through buyouts or layoffs. The No. 1 U.S. automaker signaled the latest belt-tightening in late October when it offered buyouts to 50,000 salaried employees in North America. The company also said it will cut executive ranks by 25 per cent to "streamline decision making." Some 6,000 factory workers could lose their jobs or be transferred to other plants. Its shares were last up 6.2 percent at $38.16. Tariff 'headwinds' and cost-cutting GM Chief Executive Officer Mary Barra told reporters on Monday the company can reduce annual capital spending by $1.5 billion and increase investment in electric and autonomous vehicles and connected vehicle technology because it has largely completed investing in new generations of trucks and sport utility vehicles. Some 75 percent of its global sales will come from just five vehicle architectures by early in the 2020s. It plans to reduce annual capital spending to $7 billion by 2020 from an average of $8.5 billion a year during the 2017-2019 period.

GM invests $175 million in Chevy Camaro factory

General Motors just keeps rolling out portions of its $5.4-billion plan for factory upgrades over the next three years. In the latest announcement, the automotive giant is putting $175 million into the Lansing Grand River Assembly Plant for improvements to build the 2016 Chevrolet Camaro. The investment brings new equipment to the plant to build the pony car. An upgrade is needed to support Camaro-specific colors like Summit White, Bright Yellow, and Red Hot, and the factory is also getting two robotic framers. A second shift of 500 workers is resuming in Lansing later this summer to produce the model, as well. So far, GM has announced allocations for $2.8 billion of the $5.4 billion in upgrades. The investments include $1.2 billion to improve pickup production, $439 million for a paint shop for the Corvette, and more new equipment at other plants too. Lansing Grand River Plant Tools Up for 2016 Camaro $175 million investment enables production of lighter, more powerful model 2015-05-28 LANSING, Mich. – A $175 million investment for new tooling and equipment for the sixth-generation Chevrolet Camaro, and the return of hundreds of workers to build America's best-selling performance car for the last five years, was announced today. The facility improvements include three new paint systems for Camaro-specific colors: Summit White, Bright Yellow, and Red Hot. The investment also includes installation of two robotic framers, which allow better dimensional control to provide a more precise drive experience. The Lansing Grand River Assembly Plant will resume a second shift of 500 jobs in late summer. The all-new Chevrolet Camaro was introduced on Detroit's Belle Isle on May 16. The current generation Camaro has been America's favorite performance car for five consecutive years, attracting both long-term Camaro fans and new buyers to Chevrolet. To improve on that success, the sixth-generation Camaro elevates every aspect of Camaro with a suite of new technologies, even higher levels of performance and fuel economy, and a leaner, more athletic design. "I may be the luckiest mayor in America today," said Lansing Mayor Virg Bernero. "Gearing up for full-scale production of the legendary Chevy Camaro is a new high point in the more than two decades of extraordinary partnership between the City of Lansing, General Motors and the UAW.