1967 Chevelle "pro Touring" Coupe! Only 930 Miles Since Completed! on 2040-cars

Auto blog

Next Chevy Silverado could get this built-in tailgate step

General Motors just received patent approval for a tailgate step in a pickup bed. And given the timing, don't be surprised if you see this on the upcoming 2019 Silverado pickup (not the mention its GMC Sierra twin), expected to arrive in late 2018. According to the patent, granted in December of last year, the whole mechanism is housed in the tailgate assemble. The magic happens when a portion of the top half of the tailgate swings down and a step folds out. There's also a handle that locks into position to help climb up into the bed. As trucks get bigger and taller over the years, it gets harder and harder to access the cargo bed. Ford's solution with the 2009 F-150 was a step that slides out from the end of the tailgate. Back then, Chevy made an ill-advised ad highlighting the feature for Ford. And while Howie Long mocked the F-150's "man step" Ford saw almost a third of its trucks with the option in the first year. The GM design seems to improve on Ford's idea as it appears to be wider and has a back to the lower step. That is, you don't have to worry about stepping through the ladder-rung design as on the F-150. Ford's tailgate step later spread to the F Super Duty, and other cargo access assists have proliferated through the truck world. On the most recent redesign, the Chevrolet Silverado took a trick from the Avalanche and added cutouts to the corners of the rear bumper that act as a foothold. Ford also offers a deployable side step, Chevrolet has running boards that scoot rearward with a kick of the boot, and Ram offers fixed wheel-to-wheel side rails. Nissan is in on the game too, with an optional folding step that tucks under the rear bumper. We don't expect Chevrolet to comment on when or if we'll see this feature in the showrooms. But given that engineers are already hard at work on the next Silverado and the timing of this patent lines right up with the new truck's development cycle, we'll be disappointed if this patent stays in the file cabinet. Related Video:

2014 Chevrolet Silverado and GMC Sierra debut all-new designs, three new engines

General Motors has finally dropped the curtain on the 2014 Chevrolet Silverado and 2014 GMC Sierra. Both trucks have undergone substantial revisions with updated versions of the company's 4.3-liter V6, 5.3-liter V8 and 6.2-liter V8 engines. In a shot across the bows of both Ford and Chrysler, GM says it won't use a V6 engine adapted from passenger car applications. Instead, it developed the 4.3-liter engine based on its proven truck-duty architecture.
All three mills will boast direct injection fuel systems as well as a new cylinder head design. Combined with a revised piston, the new engines feature a smaller combustion chamber with a compression ratio of 11:1 or higher depending on the application. Cylinder deactivation and continuously variable valve timing are all part of the recipe, and each engine is paired with a six-speed automatic transmission with auto grade breaking. So far, no fuel economy or horsepower figures have been released, though GM says the new engines will best their predecessors in both areas.
Outside, the trucks feature a number of enhancements to reduce drag and wind noise, and GM claims both the Silverado and Sierra will offer buyers some of the quietest cabins in the class. Extended cab models now feature front-hinged rear doors to allow easier access to the back passenger area, and Crew Cab buyers can now select between a five-foot, eight-inch bed or a six-foot, six-inch bed. Buyers with a mind toward going off road will also rejoice in the return of the Z71 package, complete with Rancho shocks, front tow hooks and additional under-body protection.

With only 246 Volts sold in Australia, Holden not getting next-gen model

The Chevrolet Volt has not been the resounding success General Motors hoped for here in the United States. But it's fortunes in Chevy's home country are nothing compared to how poorly it's done down under. Only 246 Volts have been sold in Australia, where the car is branded as a Holden, since its debut in 2012. That's not just a bad showing – it's an absolute disaster. According to Motoring.com.au, it was the Volt's astonishing $60,000 price tag, combined with a lack of interest from Aussie drivers, that killed the car's chances. What's fascinating about this development, though, is that it doesn't necessarily seem to be Holden that's pulling the plug. Instead, it's the Volt's Hamtramck, MI factory, which is preparing to shift into production of the second-generation model that seems to be taking the blame. According to Motoring, the plant confirmed that it will only build the Gen 2 plug-in in left-hand-drive form, basically ruling out a model for Australia. "Electric and hybrid vehicles haven't taken off in Australia," Holden's director of communications, Sean Poppitt, told Motoring. "Considering the lack of infrastructure, the lack of government incentives, the large distances between cities, it's a tough sell." The death of the right-hand drive Volt won't be the only loss of business in Hamtramck. Opel has already confirmed that it will drop the plug-in's European fraternal twin, the Ampera, while the next-gen Chevy won't make the trip across the pond either. Related Video: