1969 Chevy Camaro Rs 350 Auto 12 Bolt Ps Pdb Tubular A Arms See Video on 2040-cars

Auto blog

Why does the Corvette Stingray have so many vents? Here's why

Just looking at the new 2014 Chevrolet Corvette Stingray, it's not hard to see that the car's design was created with aerodynamics at the forefront, but Chevrolet designers point out exactly what went into designing the iconic coupe in a pair of recently released videos. The videos show the Corvette going through early design phases, including clay models and wind tunnel tests, as well as talking to the car's chief engineer, Tadge Juechter.
Both videos help explain various aspects of the C7 Corvette, but it's the aero tuning of the car that is most interesting. This includes extra attention paid to the lower air dam and vented hood to help reduce drag and lift, while the rear quarter inlets are for differential and transmission cooling. Juechter said that some of these aero-tuned elements were inspired from GM's involvement in racing.
If you have about five minutes and you can't get enough information about the new 'Vette, then check out the videos posted below.

2024 Chevrolet Silverado EV output jumps to 754 hp and 785 lb-ft

A couple of days ago, GMC unleashed its 2024 Sierra EV Denali Edition 1 pickup, the luxury truck division's version of the 2024 Chevrolet Silverado EV. As has been the case between Chevy and GMC for decades, GMC designers worked to put ample visual difference between the two pickups that share the similar underpinnings. Unlike what's been the historical case, GMC announced output figures for the Sierra EV well above those for the Silverado. Preliminary estimates for the battery-electric Sierra with the dual-motor powertrain are 754 horsepower and 785 pound-feet of torque. Chevy revealed the 2024 Silverado EV in January with 664 hp and 785 lb-ft in RST trim. We're not sure what happened after the GMC debut, but the Bowtie has updated the Silverado's output to match the GMC with 754 hp and 785 lb-ft. Chevy truck communications spokesperson Sean Szymkowski submitted a statement to various outlets explaining, "As we prepare for production of the Silverado EV, our engineering team has further refined the estimated performance specs for the 2024 Chevrolet Silverado EV RST First Edition. GM now estimates horsepower to be up to 754 and torque up to an estimated 785 lb-ft when Wide Open Watts mode is engaged." It's possible Chevrolet did so in order to forestall backlash about the disparity, or it's possible the automaker already planned to do so after the GMC dropped. On the ICE side, buyers have got used to powertrain parity, the Silverado and Sierra offering the same engines with the same outputs even with pricing about $3,600 apart on the respective top trims. No matter how the decision was made, the benefits redound to Silverado EV buyers. By the way, the "Wide Open Watts" reference refers to the driving mode required to extract these peak power figures. In the GMC Sierra EV, this is called Max Power Mode. We're still looking for clarity on the output figures in everyday driving modes, we believe those will be the same 510 hp and 615 lb-ft that's the maximum in the lower trim Silverado EV Work Truck.    With a year to wait before the Silverado RST EV reaches reservation holders, and with the Chevrolet Work Truck providing real-world feedback before the RST arrives, don't be surprised at more tweaks made to both the Silverado and Sierra EVs before they hit the market. Related video: GMC reveals the all-electric 2024 Sierra EV

Want a V8 on the cheap? Buy a work truck

In case you didn't notice, V8 cars have gotten pretty expensive. If you want a modern muscle car like the Dodge Challenger R/T, Ford Mustang GT, or Chevy Camaro SS, you'll need between $34,000 and $38,000 for a stripped out example of one. The cheapest of those is the Challenger, and the priciest is the Camaro. These are also the cheapest V8 cars the companies offer. But if you absolutely have to have a V8 for less, there is an option, work trucks. As it turns out, all of the Big Three offer their most basic work trucks with V8s. And because they're so basic, they're pretty affordable, especially when sticking with the standard two-wheel drive. A Ram 1500 Tradesman with a V8 can be had for as little as $29,840, which is a little more than $4,000 less than a Challenger R/T. For a bit more at $30,275, you can have a Chevy Silverado W/T, almost $8,000 less than a Camaro SS. The most expensive is the V8 Ford F-150 starts at a starting price of $30,670, which is a bit over $5,000 less than the Mustang. Of course you'll be in an ultra bare bones vehicle with few comforts, and the price will go up if you add stuff, but we're bargain hunting here, and sacrifices are sometimes necessary. Besides, what you lose in comfort, you gain in loads of cargo space and towing (try to look at the bright side). Also, as a side note, all three trucks are available with optional electronic locking rear differentials. At the discounted price of these trucks, you still get a heaping helping of power. The most potent of the trio is the Ram 1500 Tradesman with 395 horsepower and 410 pound-feet of torque generated by a 5.7-liter V8. Compared with the Challenger R/T, the Ram is up by 20 horsepower and they're tied for torque. The value proposition is even more stark between the two vehicles when looking at the price per horsepower. Each pony in the Ram costs $75.54, while the Challenger charges you $90.91. The Challenger is also more expensive per horsepower than its close competitors. The F-150's 5.0-liter V8 is just barely behind the Ram with 395 horsepower and 400 pound-feet of torque. That's still more power than the Challenger, and it matches the torque of the 2017 Mustang GT. On the down side, it still would be down 20 horsepower on that same 2017 Mustang, and it's behind by 60 horsepower and 20 pound-feet on the new 2018 Mustang GT. The F-150 also just edges out the Mustang in the dollar per horsepower measure.