1969 Chevrolet Camaro Resto-mod on 2040-cars
Pansey, Alabama, United States
If you have any questions please email at: jannetjhhartgraves@chelseafans.net .
Up for sale is my 1969 Chevrolet Camaro. The previous owner did a full frame off restoration and its beautiful. I
was able to reach out to the previous owner who owned it for over 20 plus years and get almost 100 build pictures.
I was also able to find out that is has all original metal with the exception of the lower front valance.
It was solid silver when I bought it and just recently I had the rally stripes painted on the car. So most
everything on the top of the car was painted about 3 months ago and there are very few, if any flaws. I'd rate the
paint probably an 8 out of 10... maybe higher
The engine runs great and the 4-speed muncie M22 was just rebuilt and pulls hard. I will list a few highlights
below. I am in no hurry to sale this and I'm not even sure I want to sale it, but if the right offer comes along
then i'll move on to the next project.
*Chevy 355 with mild 350hp , Edelbrock Performer RPM Intake, mild cam and Edelbrock carb
*Muncie M22 4-speed recently rebuilt with documentation
*TKO shifter
*3.73 gears in a 10 bolt rear end
*SSBC 4 Wheel Disc Brake conversion
*Push button start hidden under dash
*Flowmaster Super 44 with H-pipe (Sounds amazing)
*All rubber bushings replaced with Polyurethane (frame, body, control arms, engine mounts)
*March Pulleys and serpentine belt
*Heater box completely rebuilt
*Flaming River tilt steering column
*Flaming River one piece machined steering wheel ( Steering wheel is removable)
*Covans Carbon Fiber gauge cluster
*Auto Meter Ultra Light gauges
*H4 Headlight conversion
*All new sounds deadening through-out on build
*All new window/door seals/rubber, new glass and new upper and lower door hinges
*Billet Specialties billet black anodized hood hinges, trunk hinges, and fender braces
*Fesler billet black anodized 3D taillights
*Digitails rear LED taillight conversion
*Black A4 race seats with slide and recline adjustment
*Sparco 4 point harness
*All new OE wiring front to back including new factory fuse box
*Hotchks lowering springs and lowering leafs and new KYB shocks
* Billet Specialties Laguna wheels 18x8 front and 19x10 Almost brand new! Less than 500 miles
* Bridgestone Pole position tires 225/25/18 front 275/35/19 rear Less than 500 miles
* Body was media blasted, epoxy primed and then a 2 stage PPG base/clear
*New Optima yellow top battery
*2 Diamond 6x9 rears, two Diamond 6x9 stock front locations
*Eclipse XA5000 5 channel amp
*Alpine single 10" enclosure
The car is in excellent shape and pictures won't do this thing justice i'm sure. It has always been garage kept and
babied. The previous owner rarely drove the car, but i've definitely driven it and enjoyed it and wouldn't be
afraid to take it anywhere.
Chevrolet Camaro for Sale
1968 chevrolet camaro(US $22,500.00)
1973 chevrolet camaro z-28(US $22,000.00)
1971 chevrolet camaro z-28 rs(US $23,100.00)
1971 chevrolet camaro ss rs(US $22,000.00)
1968 chevrolet camaro(US $20,900.00)
1967 chevrolet camaro(US $22,200.00)
Auto Services in Alabama
Welch`s Muffler ★★★★★
Tire Pro Inc ★★★★★
Tim`s Auto Sales ★★★★★
The Drive Shop ★★★★★
Swedish Autotech Inc ★★★★★
Steve`s Muffler Service ★★★★★
Auto blog
Why does the Corvette Stingray have so many vents? Here's why
Sun, 27 Jan 2013Just looking at the new 2014 Chevrolet Corvette Stingray, it's not hard to see that the car's design was created with aerodynamics at the forefront, but Chevrolet designers point out exactly what went into designing the iconic coupe in a pair of recently released videos. The videos show the Corvette going through early design phases, including clay models and wind tunnel tests, as well as talking to the car's chief engineer, Tadge Juechter.
Both videos help explain various aspects of the C7 Corvette, but it's the aero tuning of the car that is most interesting. This includes extra attention paid to the lower air dam and vented hood to help reduce drag and lift, while the rear quarter inlets are for differential and transmission cooling. Juechter said that some of these aero-tuned elements were inspired from GM's involvement in racing.
If you have about five minutes and you can't get enough information about the new 'Vette, then check out the videos posted below.
First 2014 Chevy Corvette Stingray spotted crashed in the wild
Tue, 12 Feb 2013This restyled blue 2014 Chevrolet Corvette Stingray is wearing manufacturer plates, and it appears to be the same one seen around the internet in various pictures lately. This crash is likely not part of the Chevrolet testing regimen, however. Digital Corvettes forum member gpetry posted the shot with a note: "got this picture e-mailed from a friend in Arizona last week..." No circumstances are given, other than the incident occurred in the thick of a set of curvy roads, and the coupe ping-ponged off a guardrail and into the rock wall. Hopefully everyone involved in the incident walked away.
It may not be a pretty thing to see, a crashed sports car that's not even available for sale yet, but rest easy. Many pre-production cars are used for development and then unceremoniously crushed and scrapped, anyway. If that's the case here, that makes this wrecked 'Vette less of a tragedy and more of a case of exceptional efficiency.
GM recalling 135,000 SUVs with plastic jacks that can break
Sat, Jun 19 2021General Motors is recalling 135,400 compact crossovers because their emergency jack can break under load. The problem occurs when the jack — which is plastic — isn't positioned correctly as detailed in the owner's manual. This can cause the jack to fracture. If the jack breaks and the vehicle collapses, there's a risk of injury or death, according to an NHTSA recall alert. The recall involves the 2020-22 Buick Encore GX and 2021-22 Chevrolet Trailblazer. A GM test driver discovered the problem when he broke a jack during a durability test on a Trailblazer. GM started investigating in April and found 21 claims of jack failures, including one reported injury. "This jack design may not be sufficiently robust against fractures if improperly or incorrectly positioned on the vehicle frame by the user," a NHTSA safety report said. GM will start notifying vehicle owners July 26. It will provide free replacement jacks that are made of metal.  Featured Gallery 2021 Buick Encore GX View 21 Photos Recalls Buick Chevrolet GM




