1968 Chevrolet C10 Pickup Base 4.6l 8' Fleetside Body on 2040-cars

Auto blog

Is the skill of rev matching being lost to computers?

If the ability to drive a vehicle equipped with a manual gearbox is becoming a lost art, then the skill of being able to match revs on downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. The usefulness of rev matching in street driving is limited most of the time – aside from sounding cool and impressing your friends. But out on a race track or the occasional fast, windy road, its benefits are abundantly clear. While in motion, the engine speed and wheel speed of a vehicle with a manual transmission are kept in sync when the clutch is engaged (i.e. when the clutch pedal is not being pressed down). However, when changing gear, that mechanical link is severed briefly, and the synchronization between the motor and wheels is broken. When upshifting during acceleration, this isn't much of an issue, as there's typically not a huge disparity between engine speed and wheel speed as a car accelerates. Rev-matching downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. But when slowing down and downshifting – as you might do when approaching a corner at a high rate of speed – that gap of time caused by the disengagement of the clutch from the engine causes the revs to drop. Without bringing up the revs somehow to help the engine speed match the wheel speed in the gear you're about to use, you'll typically get a sudden jolt when re-engaging the clutch as physics brings everything back into sync. That jolt can be a big problem when you're moving along swiftly, causing instability or even a loss of traction, particularly in rear-wheel-drive cars. So the point of rev matching is to blip the throttle simultaneously as you downshift gears in order to bring the engine speed to a closer match with the wheel speed before you re-engage the clutch in that lower gear, in turn providing a much smoother downshift. When braking is thrown in, you get heel-toe downshifting, which involves some dexterity to use all three pedals at the same time with just two feet – clutch in, slow the car while revving, clutch out. However, even if you're aware of heel-toe technique and the basic elements of how to perform a rev match, perfecting it to the point of making it useful can be difficult.

2014 Chevy Cruze Diesel destined for Chicago debut

It's been a little over a year and a half since General Motors first confirmed plans to offer a diesel-powered Chevrolet Cruze here in the United States, and we've now learned that the oil-burning compact will debut under the lights of the Chicago Auto Show in February. According to GM Authority, the Cruze Eco-D will be introduced as part of the entire 2014 model year Cruze range, set to go on sale in the second quarter of this year.
Earlier reports have indicated that the diesel Cruze will be able to achieve fuel economy numbers in the range of 50 miles per gallon. For comparison, the similarly sized Volkswagen Jetta TDI is rated at 30/42 mpg city/highway, but as we found out in our long-term test of the 2011 model, hitting 50 mpg was a piece of cake.
Official specifications will be released at the time of the 2014 Cruze's unveiling, though reports have stated that the sedan will be powered by a reworked version of the 2.0-liter turbo-diesel inline-four found in the Holden Cruze CDX overseas. In that application, the four-pot oil-burner produces 160 horsepower and 265 pound-feet of torque - increases of 20 hp and 29 lb-ft over the 2.0-liter engine used in VW's Jetta TDI.

GM doubles miles open to its Super Cruise technology

DETROIT — General Motors said on Wednesday owners of certain vehicles equipped with its Super Cruise assisted driving system will now be able to use it on 400,000 miles (643,740 km) of North American roads, doubling the current operating area as Tesla and other automakers race to deploy hands-free cruising technology. GM's Super Cruise system, like Tesla's Autopilot system, is a driver assistance system, and does not enable true autonomous driving. Spurred by Tesla's aggressive deployment of Autopilot, and Tesla Chief Executive Elon Musk's promises of a more advanced "Full Self Driving" system, GM, Ford, Volkswagen and Mercedes-Benz are racing to deploy competing partial automation technology in major markets. At the same time, safety regulators are showing concern that drivers do not understand that Autopilot and similar systems are not designed to take over driving in every circumstance. The GM system's sensors and software allow a motorist to cruise with hands off the wheel on highways that have been mapped in detail. But the driver is expected to stay alert and ready to take over the car. GM uses technology to monitor the driver, and Super Cruise will sound alarms or slow the car to a stop if it detects that a driver is not responding. Starting later this year, GM plans to enable vehicles equipped with Super Cruise and the company's latest vehicle electronic system to operate hands-free on major, undivided highways in the United States and Canada, as well as additional miles of divided, interstate highways. Currently, Super Cruise operates only on interstate, divided highways. The expansion, enabled by wider digital mapping, will allow owners of properly equipped GM vehicles to cruise hands-free on stretches of Route 66 and the Pacific Coast Highway in the U.S. West or the Trans-Canada highway in Western Canada, GM said. Many of the new roads GM has mapped are in rural, heartland states where GM pickup trucks are popular. GM plans to offer Super Cruise as an option on its Chevrolet Silverado and GMC Sierra large pickups later this year. GM has said previously it intends to offer Super Cruise as an option on 22 models by the end of 2023. Depending on the model, Super Cruise costs $2,200 to $2,500 to add as an option. (Reporting by Joe White in Detroit; Editing by Matthew Lewis) Related video: Cadillac Chevrolet GM GMC Technology Super Cruise