Custom Chevy Show Car 1500 Miles Auto on 2040-cars

Auto blog

Chevy's 6.6-liter Duramax is pretty much all new

To say there's a heated battle in heavy-duty pickups is an understatement, with Chevrolet, Ford, and Ram constantly trading blows of increased torque, horsepower, and towing capacity. The latest salvo is the revised, more powerful turbo diesel 6.6-liter Duramax V8 in the 2017 Chevy Silverado. It has 910 pound-feet of torque, an increase of 145, putting it nearly level with the Ford Super Duty. Here's a closer look at where those gains come from. How exactly did Chevrolet add all that torque plus 48 horsepower? The automaker essentially took a fine-tooth comb to the entire engine. Chevy says it changed 90 percent of the V8, and the cumulative effect of those small changes adds up to big increases. As you might guess, the turbocharger is updated. The larger unit features electric actuation of the variable nozzle turbine (VNT), and what Chevy calls a double axle cartridge mechanism that separates the VNT moving parts from the housing. That helps with heat performance as well, with a claim that the exhaust side of the turbo can run continuously up to 1,436 degrees Fahrenheit. Helping that cause are six exhaust gaskets made of Inconel - an nickel alloy that contains chromium and iron – and upgraded stainless steel for the exhaust manifold. Despite having the same cast iron cylinder block, albeit with some minor enhancements, the engine has new cylinder heads, pistons, piston pins, connecting rods, and crankshaft, which have all been upgraded to handle 20 percent higher cylinder pressures. Alongside the increase in pressure, Chevrolet also increased the cylinder head's structure with a honeycomb design. The pattern features high-strength aluminum with dual layer water jackets that not only improve strength, but also optimize water flow for better cooling. For 2017, the cylinder head also benefits from integrated plenum that aids the engine in getting more air under heavy loads. The cylinder head isn't the only component to get a minor update, as the pistons have a larger diameter pin for improved oil flow. The same detailed improvements has been bestowed to the humble connecting rods (second in our hearts only to the inanimate carbon rod). The new design has the bolts oriented roughly 45-degrees to the rod instead of parallel. The angle split design, as it's called allows for easier passage through the cylinder.

Corvette Stingray Shooting Brake under consideration by Callaway [w/poll]

Callaway has released a few renderings of a design study for a shooting brake version of the C7 Chevrolet Corvette Stingray. The company says it wants to create a long-roof version of America's sports car to offer buyers more interior room and a vehicle with "unique style." The company says it will use structural carbon fiber for the new body bits, which suggests the conversion shouldn't add too much more weight to the Corvette. Along with a few mechanical tweaks, the Callaway Corvette Stingray AeroWagon could breeze past the 200 miles per hour barrier.
Provided that they get enough interest, Callaway estimates they will be able to effect the changes on the Chevrolet for around $15,000, and says the conversion work should be available through its network of dealers. You can check out the brief press release below for more information, or head over to the Callaway site to plunk down a deposit - but before you do, we want to know... do you find this C7 wagon interesting? Vote in our poll below, then feel free to leave a few lines in Comments.
View Poll

Autoblog's guilty pleasure cars

Guilty pleasures are part of life – don't even try to pretend like you don't have one (or two, or six). In the non-automotive space, this could come down to that secret playlist in your iPhone of songs you'll only listen to when you're alone; or think of that one TV show you really do love, but won't admit to your friends. I've got plenty, and so do you. Going back to cars, here's a particularly juicy one for me: several years ago, I had a mad crush on the very last iteration of the Cadillac DTS. Oh yes, the front-wheel-drive, Northstar V8-powered sofa-on-wheels that was the last remaining shred of the elderly-swooning days of Cadillac's past. Every time I had the chance to drive one, I was secretly giddy. Don't hate me, okay? These days, the DTS is gone, but I've still got a mess of other cars that hold a special place in my heart. And in the spirit of camaraderie, I've asked my other Autoblog editors to tell me some of their guilty pleasure cars, as well – Seyth Miersma, as you can see above, has a few choice emotions to share about the Mitsubishi Lancer Evolution. Read on to find out what cars make us secretly happy. Mercedes-Benz SL65 AMG This decadent convertible is the epitome of the guilty pleasure. It's big, powerful, fairly heavy and it's richly appointed inside and out. It's a chocolate eclair with the three-pointed star on the hood. Given my druthers, I'd take the SL65 AMG, which delivers 621 horsepower and 738 pound-feet of torque. That output is borderline absurd for this laid-back convertible. I don't care. You don't need dessert. Sometimes you just crave it. The SL line is about the feel you get on the road. The roof is open. The air, sun and engine sounds all embrace you. It's the same dynamic you could have experienced in a Mercedes a century ago, yet the SL gives you the most modern of luxuries. An Airscarf feature that warms my neck and shoulders through a vent embedded in the seat? Yes, please. Sure, it's an old-guy car. Mr. Burns and Lord Grantham are probably too young and hip for an SL65. I don't care. This is my guilty pleasure. Release the hounds. – Greg Migliore Senior Editor Ford Flex I drove my first Flex in 2009 when my mother let me borrow hers for the summer while I was away at college. The incredibly spacious interior made moving twice that summer a breeze, and the 200-mile trips up north were quite comfortable.