1999 Cadillac Seville Sts on 2040-cars

Auto blog

How GM's grueling 24-hour test gets the kinks out of its performance cars

One of the biggest challenges automakers face when designing a high-performance car is making sure that it is both fast and reliable. For General Motors, any car that might be taken to the track by its owner - like the Corvette, Camaro Z/28 (shown above) and the Cadillac CTS-V, for example - undergoes a rigorous and strenuous 24-hour test by engineers at the Milford Proving Grounds, as pointed out by Car and Driver.
We've posted on this topic in the past - on a video showing the Camaro ZL1 being brutalized, for instance - but this article gives a more in-depth look at what actually happens behind the scenes... including what that poor ZL1 went through. Though the test isn't for 24 hours straight, the cars are pushed as hard as possible by some of GM's best drivers with only the brakes and tires replaced frequently.
We don't want to ruin the fun for you, but it is an interesting article that tells just some of what GM does to develop its sports cars. Check out the full article over at Car and Driver for the rest of the story.

GM cutting production at two plants

General Motors is continuing to adjust to excess supply of some of its brands' models. To get production more in line with the vehicles' actual demand, the automotive giant is idling two of its factories in North America in the coming months. The Orion Assembly plant is going to be down from March 9-13, according to an anonymous plant worker and another insider speaking to Automotive News. The factory builds the Chevrolet Sonic and Buick Verano, but there are plenty of both models sitting on dealer lots, including 216 days worth of Sonics, according to AN. The factory already had two idle periods announced to reduce the excess. In addition, downtime is scheduled at GM's "Flex" line at the Oshawa, Ontario, Canada, plant from April 13-17. This affects supply of the Chevrolet Camaro, Impala, Buick Regal and Cadillac XTS. Among them, the automotive giant has the largest supply of Regals ready for dealers with 213 days worth of them, according to AN. The future for the whole Oshawa factory is cloudy in general, though. There are rumors that it could close entirely in the future because the Camaro is leaving and the Regal and XTS might not last much longer than 2017. The Canadian government and the labor union there intend to put up a fight, though. News Source: Automotive News - sub. req.Image Credit: Bill Pugliano / Getty Images Plants/Manufacturing Buick Cadillac Chevrolet GM orion assembly oshawa plant idle

2020 Cadillac CT4-V, CT5-V revealed, less powerful than predecessors

Expectations have reached stratospheric heights for the 2020 Cadillac CT4-V and 2020 Cadillac CT5-V, and for good reason: Their ATS-V and CTS-V predecessors were potent sports sedans with gobs of power and handling and braking to match. Now the new sedans have been revealed, and they're not what we expected. They each lose two cylinders compared with the other vehicles, and on paper, they don't look as capable. But we do have hope that these won't be the end-all, be-all performance Cadillacs. First, let's look at the cars. The CT4-V will be the base of the V brand, and it's our first look at the small luxury sedan. It has a roofline and window treatment more like past Cadillacs, eschewing the C-pillar garnish of the CT5. It also naturally gets dark trim and headlights, a unique spoiler and quad tailpipes to distinguish it as a V. Under the hood is a turbocharged 2.7-liter four-cylinder that is based on the engine in the new Chevy Silverado. It makes 320 horsepower and 369 pound-feet of torque, a far cry from the ATS-V's 464 horsepower and 445 pound-feet of torque. Cadillac CT4-V View 12 Photos Power goes through a 10-speed automatic transmission only. Both rear-wheel drive and all-wheel drive are available. It gets a mechanical limited-slip differential whereas the ATS-V had an electronically controlled limited-slip differential a la Camaro ZL1. The brakes have four-piston calipers at each corner versus six-piston front units and four-piston rear units on the ATS-V, and the rotors are smaller. Magnetic Ride Control remains standard on the rear-drive version, but the all-wheel-driver version sticks with conventional shocks. The new CT4-V is about 200 pounds lighter than the ATS-V, though, and it has 50/50 weight distribution. Additionally, both the CT4-V and the CT5-V have Super Cruise available as an option. Moving on to the CT5-V, it looks like a regular CT5 but with dark trim and lights, quad tailpipes and a unique rear diffuser. Instead of the CTS-V's 640-horsepower supercharged V8, the CT5-V uses a twin-turbo 3.0-liter V6 making 355 horsepower and 400 pound-feet of torque. Changes made to the 3.0 for the CT5-V include a new intake system and new exhaust, and it revs higher too. Like the CT4-V, it comes with a 10-speed automatic and either rear-wheel drive or all-wheel drive. It does get the electronically controlled limited-slip differential.