2007 Cadillac Dts Base Sedan 4-door 4.6l on 2040-cars

Auto blog

Cadillac CT6 PHEV battery shape a big departure for GM's plug-in hybrid tech

Anyone with any familiarity with the electric powertrain details for the two General Motors plug-in hybrids will have noticed that the information we have about the newly announced Cadillac CT6 plug-in hybrid has a lot of numbers in common with the Chevy Volt and the Cadillac ELR, like the 18.4-kWh lithium-ion battery pack and an expected all-electric range of 37 miles. We also noticed that the announcement calls the plug-in CT6 hybrid an actual plug-in hybrid and not an "extended range electric vehicle (EREV)," which is what GM calls the Volt and the ELR. This, of course, means we needed to ask GM some questions. Donny Nordlicht from Cadillac communications told AutoblogGreen that while the Volt and CT6 batteries are both 18.4-kWh, the shape is completely different. In the Volt/ELR, the battery is T-shaped (see it here). The CT6 has four seats, with a tunnel running between the two in the rear, as you can see here, but the battery in the CT6 PHEV is "a cube-shaped pack, which is between rear seats and the trunk," Nordlicht said. "There is no pass through." GM has not yet released any technical schematics about this pack, but Nordlicht said that, "The CT6's advanced mixed-material platform was designed to accommodate the PHEV system by design so that it minimally intrudes on the cabin space." It also means that the CT6 can be ordered as an optional PHEV, while the Volt and ELR were purpose-built plug-ins. GM is also distinguishing between the EREV and PHEV powertrains in its vehicles from this point forward. "We are not discarding the EREV language," Nordlicht said. "The CT6 utilizes a two-motor system mated to a 2.0T 4-cylinder engine, which is an all-new system to Cadillac." We assume that the PHEV packs will use li-ion cells from LG Chem, just like the EREVs do, but Nordlicht did not answer our question on that point. As for other details about the CT6 PHEV – like production, full dimension, and pricing – we will just have to wait until closer to when the vehicle launches for those. Related Video:

GM announces $7 billion Michigan factory investment, most going to EVs

GM announced a $7 billion investment in Michigan manufacturing, much of which is earmarked for EV production. Four sites are included, but the key elements are a new battery cell plant in Lansing and the conversion of GM's existing Orion Township facility to expand production of the forthcoming Chevrolet Silverado EV and its GMC Sierra sibling.  GM says it is the largest investment announcement in company history and that it will create 4,000 new jobs. It also says 1,000 jobs will be retained. "We are building on the positive consumer response and reservations for our recent EV launches and debuts, including the GMC Hummer EV, Cadillac Lyriq, Chevrolet Equinox EV and Chevrolet Silverado EV," said GM CEO Mary Barra.  GM says the Orion expansion and new battery plant will support an increase in full-size electric truck production capacity to 600,000 units. This is in addition to the Factory ZERO facility in Detroit that will also be constructing the electric Silverado and Sierra.  The Orion Township factory current builds the Chevrolet Bolt EV and EUV, and will continue to do so during the plant's conversion. GM did not indicate what will happen with the Bolts once that conversion is complete or whether all will continue to be built at Orion. They do not use the Ultium vehicle architecture. GM will build other EV models at three other factories that are under construction or being converted. They are located in Spring Hill, Tennessee, Ingersoll, Ontario, and Ramos Arizpe, Mexico. GM says that it will have the ability to produce 1 million electric vehicles by 2025. The Ultium Cells Lansing facility is a $2.6 billion joint investment by GM and LG Energy Solution. GM says it alone will create 1,700 jobs once fully operational by late 2024. It will join two other GM Ultium Cells battery factories currently under construction in the United States, one in Ohio and the other in Tennessee.  Not all of the $7 billion investment will be for EVs. It also announced $510 million of the total will go toward upgrading the Lansing Delta Township Assembly to produce the next-generation Chevrolet Traverse and Buick Enclave. Money will also go to upgrading Lansing Grand River Assembly.

GM recalling 524k vehicles over hood latches and toe link nuts

Just hours after confirming to Autoblog its intention to recall 97,540 vehicles in the US (117,651 in North America) for a possible manufacturing defect in the chassis control module of several models, General Motors is issuing two more campaigns that affect another 379,401 units in the US (524,384 in North America).
One campaign covers 290,107 US examples of the 2010-2015 Cadillac SRX and the 2011-2012 Saab 9-4X because the "rear toe link adjuster lock nuts" may be improperly torqued. If not up to spec, the toe adjuster link could separate and allow the wheel to shift while driving, making the handling unstable. GM says that it knows of three crashes and two injuries as a result of this problem. Dealers are inspecting the nuts and installing a new link assembly, if necessary. Autoblog first reported about this potential issue when it showed up on a list of recalls from Transport Canada.
The second recall is for 89,294 examples of the 2013-2015 Chevrolet Spark in the US manufactured from January 17, 2012, through July 29, 2014. According to GM, "corrosion can cause the secondary hood latch striker to stick in the open position." If this happens, and the primary latch also isn't engaged for some reason, the hood could fly open while driving. About 13,000 of these affected Sparks are at dealers and are being held until repaired. The fix requires replacing the hood striker. GM isn't aware of crashes, injuries or fatalities caused by this problem.