A Beautiful Cadillac Deville, With Cold Air, And New Tires on 2040-cars

Auto blog

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging

2019 Autoblog Technology of the Year finalists revealed

Every fall, we line up a range of new models with the latest and most compelling automotive technology from the past year. We test everything from semi-autonomous systems like Tesla's Autopilot to trick suspension setups like the Multimatic spool-valve shocks on the Chevy Colorado ZR2. We spend months paring down the list to a small group of contenders. After testing, dinner and healthy debate, we tally up the votes and name our winner. For Autoblog's 2019 Technology of the Year Award, our three finalists are the Cadillac CT6 with Super Cruise, the Infiniti QX50 with Variable Compression Turbo and the Mercedes-AMG E 53 with EQ Boost. Super Cruise is an advanced SAE Level 2 semi-autonomous system, though Cadillac (unlike some of its rivals) is reluctant to push that point. Cadillac would like you to think of this as an advanced driver assistance feature rather than a semi-autonomous system. Super Cruise allows completely hands-free highway driving. Thanks to a driver-facing camera, the system forces the driver to keep his or her eyes on the road even if hands are off the wheel. Although the CT6 is being discontinued, look for Super Cruise to make its way to other Cadillacs soon. VC Turbo is a little more complicated. Basically, Infiniti's 2.0-liter turbocharged inline-four can vary the compression ratio on the fly. In general, turbocharged engines are more efficient than naturally-aspirated engines when on boost, but can perform worse at low revs. VC Turbo allows for a best-of-both-worlds situation, increasing the compression at low revs and backing it off once the turbo spools up. The best part is that it does so seamlessly, with only a dash readout letting you know what's going on under the hood. Our third finalist is the EQ Boost 48-volt system in the Mercedes-AMG E 53. Like VC Turbo, EQ Boost does a lot just beneath the surface. Mercedes has developed a new turbocharged 3.0-liter inline-six and paired it with a small electric motor. While the car can't run on electricity alone, the motor helps improve both efficiency and performance, smoothing shifts and filling in low-end torque before the turbos spool up. Think torque fill, similar to a McLaren P1. Who can complain about better fuel economy and more torque? Look for the 48-volt system to make its way into most of the Mercedes-Benz lineup. The winner will be revealed next week on Autoblog, and we'll present the award Jan. 15 at the Detroit Auto Show. Related Video:

Cadillac scraps three-row CUV plans

Crossovers are one of the hottest automotive segments on the planet. Apparently, the idea of mixing the practicality of a station wagon with the looks of an SUV appeals to people whether they are in Cleveland or Shanghai because nearly every automaker is jumping into the market. So it was no surprise when early rumors suggested Cadillac was planning two, new CUVs to fit above and below the SRX. But things might have changed since then.
New rumblings indicate Caddy is taking a different route. Instead of two crossovers, only the compact is on the way, and the larger, three-row CUV on the Lambda platform to sit between the SRX and Escalade may be a goner. According to Ward's Auto, General Motors thinks that the other three-row, Lambda vehicles like the Buick Enclave and GMC Acadia compete too closely with the proposed Cadillac. The decision comes fairly close to the 2017 intended production date.
As far back as 2010, this Lambda-platform based CUV was considered highly likely for production. However, Cadillac Senior Vice President Bob Ferguson was somewhat cooler about it when he discussed the new crossover briefly last year. He said the model could use the Escalade name, despite its unibody chassis, but no decision had been made yet to actually produce it.