2005 Cadillac Cts Base Sedan 4-door 3.6l on 2040-cars

Auto blog

2015 Cadillac ATS Coupe configurator is ready to get personal

If you are in the market for a luxury coupe but would prefer it to be American, then you are in luck because the configurator for the 2015 Cadillac ATS Coupe is now online.
Prices for the Cadillac start at $38,990 (including the $995 destination fee) for the 2.0-liter turbocharged four-cylinder with 272 horsepower and 295 pound-feet of torque, or $46,145 for the 321-hp, 275-lb-ft 3.6-liter V6. Gearbox options include a six-speed manual on some 2.0 models or a six-speed automatic on both of them, and they can be ordered with all-wheel drive for $2,450 to the four-cylinder or $2,600 to the 3.6.
One thing that Cadillac does especially well here is giving customers a plethora of models and options to choose from. Trim level choices include standard, luxury, performance and premium for the four-cylinder or luxury, performance and premium for the V6. There are also 10 colors available, five of which carry an extra premium of $495 or $995. Upgraded interior packages for $1,295 add improved trim and leather, as well.

Junkyard Gem: 1969 Cadillac Coupe DeVille

The Cadillac Division was riding high in 1969, with sales numbers far surpassing those of Lincoln and Imperial. A few more years remained before fuel prices would go crazy, and prosperous Americans knew that a sleek DeVille or Eldorado gave them bragging rights at the country club. Here's a thoroughly used-up '69 Coupe DeVille, finally at the end of its journey and residing in a self-service wrecking yard in Denver, Colo. This inspection certificate shows that the car lived in Louisiana a decade ago. Since this is the sort of pervasive rust that occurs in places much wetter than arid High Plains Colorado, we can assume that this DeVille spent many years in the land of gumbo and alligators. The decklid sports Fleetwood badging and a Rickenbaugh Cadillac emblem, but Cadillac didn't make two-door Fleetwoods in 1969. Perhaps a Colorado-sold Fleetwood donated its decklid to replace a rust-ravaged lid on this car. Actually, there's a good chance it was purchased at this very yard. The once-opulent interior has suffered greatly over the decades, with the reek of mildewed carpeting and irradiated leather giving it That Hooptie Car Smell. Try to picture what this scene looked like in happier days, a half-century ago. The 1969 Cadillac V8 engine displaced a mighty 472 cubic inches (that's 7.8 liters to those of you living under the cruel knout of the metric system) and delivered a gross 375 horsepower and 525 lb-ft of torque. Scaling in at 4,595 pounds (about a half-ton less than a new Escalade), the DeVille needed that power to keep up with those cheap-but-V8-equipped Chevy Chevelles. For 1970, Cadillac would stroke this engine to a staggering 500 cubic inches for Eldorado buyers. This engine family lasted through 1984, after which it was replaced by the much-loathed High Technology V8. The build quality and snob appeal of the 1969 Cadillacs kept them on the road for decades after most of their peers got crushed, but this one was just too far gone to be worth restoring. Featured Gallery Junked 1969 Cadillac Coupe DeVille View 21 Photos Auto News Cadillac Automotive History Classics

Cadillac adds torque-number badging to most new models starting in 2020

Few phrases describe huge swaths of America better than a phrase spotted on the back of a top-fuel dragster at an NHRA event: "You can never have too much horsepower or ammunition." If Cadillac CEO and wily Canuck Steve Carlisle has his way, the revised phrase would substitute "torque measured in Newton-meters" for "horsepower." Starting with the 2020 model year, America's luxury brand will add torque figure badges to CT and XT models, beginning with the XT6. The badge above kinda almost sorta represents the torque produced by the luxury crossover's 3.6-liter V6. That badge did not appear on the XT6 we photographed at the Detroit Auto Show. In U.S. parlance, twist in the XT6 comes to 271 pound-feet. Translated to Newton-meters, that's 367 Nm. Then round that up to the nearest 50, which Cadillac will do, and one arrives at 400. True, the rounding prevents a future of number jumbles like the 2020 XT6 367 vs. the 2021 XT6 419T. Nevertheless, we don't know why Cadillac is rounding to the nearest 50 instead of the nearest 25, since 50 Nm is about 37 lb-ft and could conceal a decent torque increase between model years. A "T" denotes turbocharging, and we imagine there'll be designations for hybrids and electric cars. We think most modern attempts at engine-based nomenclatures soon get as complicated as ciphers or come unmoored from their original scheme. And based on our experience with The Average Car Buyer, they don't care. A bigger number, no matter what that number represents, means more, which is the important thing. Because America, right? Maybe not. Carlisle said, "We're not talking about displacements any more," and the new badging will give consumers "a clear understanding of the power differences across the lineup." The brand believes torque provides a better comparison between ICE, hybrid, and EV powertrains and "the balance between fuel economy and performance." As for the immigrant unit of measurement, Carlisle told CNET, " It's metric, it's universal, it's global, we have to think about all the markets that we're doing business in." Oh, and, "Engineers certainly prefer Newton-meters." The new nomenclature will not be applied to V-series models or the Escalade, because the CEO holds that "special cars get special names." We should probably take a moment to reassure the CT and XT models that Steve Carlisle thinks you're all special, too. Just a different kind of special.