Luxury Low Miles 4 Dr Crew Cab Truck Automatic 6.2l V8 Sfi Ohv 16v Black Raven on 2040-cars

Auto blog

Cadillac drops the base engine in the 2017 ATS

Cadillac, in an effort to boost sales of the slow moving ATS, is making some changes to the 2017 model. Most notably, the luxury manufacturer is dropping the base 2.5-liter normally-aspirated four-cylinder engine from the lineup, leaving the 272 hp 2.0-liter turbocharged four as the base engine. The base 2.0-liter ATS will start at $35,590, $1,380 more than the 2016 model, though that's partially offset by more standard equipment. The base model now comes standard with Cadillac's controversial CUE infotainment system with an 8-inch touchscreen display, a Bose surround-sound speaker system, and a backup camera. Despite the bump in price for the base model, all other ATS trim levels will see prices reduced between $650 and $1,100, depending on the model. The ATS was designed to be Cadillac's answer to the BMW 3-Series and Mercedes-Benz C-Class. Though the ATS was originally released at a time where the Germans were slightly off their game, it's never quite matched up in terms of performance or customer perception posting disappointing sales figures compared to the competition. Cadillac has had problems getting customers into cars, and few ATS customers are converts from luxury competition. In order to offload inventory and lure in new customers, the company has previously been forced to offer big lease deals. Many of these customers have come over from more mainstream brands like Chevrolet and Ford. ATS sales have fallen 23 percent through May versus 2015. The car's market share has fallen every year since 2013, currently occupying just 4.5 percent of the compact luxury market. Unless Cadillac can offer some truly amazing deals, we don't expect many shoppers to buy American over the strong German competition. Related video: Cadillac Luxury Sedan

2015 Cadillac ATS, CTS recalled over brake issue

A problem with the brakes on the 2015 ATS and CTS has prompted Cadillac to issue a recall. According to the notice below from the National Highway Traffic Safety Administration, the issue revolves around the bracket that connects the brake pedal assembly and the rod that actuates the brakes. Even under normal operation, that bracket could fracture, impeding the ability to slow or stop the vehicle. That, as you're surely aware, could increase the risk of a crash. The issue affects a reported 2,163 vehicles in the United States. Owners will need to be bring their vehicles in to their local dealership to have those brackets replaced starting on August 1. See the complete recall notice below. RECALL Subject : Brake Pedal Bracket may Fracture Report Receipt Date: JUN 09, 2015 NHTSA Campaign Number: 15V358000 Component(s): SERVICE BRAKES, HYDRAULIC Potential Number of Units Affected: 2,163 Manufacturer: General Motors LLC SUMMARY: General Motors LLC (GM) is recalling certain model year 2015 Cadillac ATS and CTS vehicles. The affected vehicles have a bracket between the brake pedal assembly and the rod that actuates the brakes that may fracture during normal brake pedal operation. CONSEQUENCE: If the bracket fractures, the driver would not be able to apply the brakes, increasing the risk of a crash. REMEDY: GM will notify owners, and dealers will inspect the vehicle and replace any affected bracket, free of charge. The recall is expected to begin August 1, 2015. Owners may contact Cadillac customer service at 1-800-458-8006. GM's number for this recall is 15352. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

GM adds 1,200 jobs at Detroit-Hamtramck plant

General Motors is making a big move at its Hamtramck, MI, factory, announcing it will add a second shift and hire over 1,200 workers within the next several months. It's expected that by early 2016, the factory will employ over 2,800 workers to build the Chevrolet Volt, Impala, Malibu, Cadillac ELR, and by early next year, the new CT6. According to GM Hamtramck spokesperson Courtney Zemke, 40 of the 1,200 positions are for salaried employees, while the remainder will be hourly positions. As for where these employees will go, positions are being made available across the factory, so GM isn't focusing on any particular area for its new hires. It's a similar story behind the hiring surge itself. GM said in its press release that the "second shift is necessary to meet forecasted market demand," a position Zemke reiterated. It's a matter of demand across the plant's portfolio, rather than any one particular product seriously outstripping supply. Naturally, the United Auto Workers is happy with the move. "The workforce at Detroit-Hamtramck is second to none," UAW Local 22 Shop Chairman Don LaForest said in the attached release. "We appreciate the opportunity to expand our UAW-GM family." Hiring is going on now, with the second shift slated to get underway in early 2016. GM's Detroit-Hamtramck Assembly to Add Second Shift and More Than 1,200 Jobs Plant will nearly double its workforce by early 2016 2015-10-22 DETROIT – General Motors is nearly doubling its workforce at Detroit-Hamtramck Assembly by adding a second shift and more than 1,200 hourly and salaried jobs. The addition of a second shift will increase the plant's workforce to approximately 2,800 people when hiring is completed. The second shift is necessary to meet forecasted market demand for the five cars produced at Detroit-Hamtramck. "This is the result of the award-winning vehicles Detroit-Hamtramck produces and the confidence GM has in our team to build world-class quality for our customers," said Plant Manager Gary West. Second shift hiring is underway, and the shift is scheduled to begin operations in early 2016. "The workforce at Detroit-Hamtramck is second to none," said UAW Local 22 Shop Chairman Don LaForest. "We appreciate the opportunity to expand our UAW-GM family." The 4.1 million-square-foot Detroit-Hamtramck Assembly opened in 1985. GM has invested $1 billion in the plant over the last six years, making it one of the company's most-agile manufacturing facilities in North America.